GTC Wheels | GT-CR | GT-CX | GT-CS 18"/19"

Jason@Euro-Division · 11-12-2013, 10:28 PM

Hello,

We have all three popular wheels IN STOCK in various sizes, finishes etc.

Fitment Notes for 1 Series:
GT-CR = 19" Square or Staggered available
GT-CX = 18" Square or Staggered available
GT-CS = 19" Square or 18" Square available

GT-CR

Available Finishes
- Hyper Silver
- Matte Black
- Matte Anthracite
- Gloss Black
- Hyper Black

Available Sizes
- 19x8.5 ET35
- 19x8.5 ET45
- 19x9.5 ET33
- 19x9.5 ET50

Fitted Photos

GT-CS

Available Finishes
- Super Silver
- Matte Black
- Matte Anthracite

Available Sizes
- 18x8.5 ET40
- 18x9.5 ET33
- 19x8.5 ET40
- 19x8.5 ET20
- 19x10 ET25
- 19x10 ET38

Fitted Photos

GT-CX

Available Sizes
- 18x8.5 ET35
- 18x8.5 ET45
- 18x9.5 ET50
- 18x9.5 ET33
- 19x8.5 ET20
- 19x8.5 ET35
- 19x9.5 ET33
- 19x9.5 ET22

Fitted Photos

To place an order or any inquiries, please pm or email sales@eurodivision.com.au

Payments via Bank Transfer or Paypal are accepted.

Simonnn · 11-12-2013, 10:55 PM

Do you have GT-CS in a more 1 series friendly offset for the rears in 18x9.5? +33 is probably a bit too low

Jason@Euro-Division · 11-13-2013, 04:56 AM

Quote:

Originally Posted by Simonnn

Do you have GT-CS in a more 1 series friendly offset for the rears in 18x9.5? +33 is probably a bit too low

Hi Simon,

At this stage, only a square setup is suitable for the 1 Series. With the 18x8.5 ET40, they're a pretty flush fitment on the E8x.

If you must go staggered, perhaps you can consider the GT-CX, also in 18".

Hope this helps.

aus135i · 11-13-2013, 05:03 AM

Jason which 19" can fit on a M135i? and what size rubber would those be running?

Cheers

Prodigy. · 11-15-2013, 07:08 AM

Jason can you confirm the width and offsets on the 19" GT-CR please. I was looking at the GTC website and it states the width as 9.0. http://gtcwheels.com/genntech-cr.html

Looking for the best staggered fitment for an e82 with minimum tyre stretch and no rubbing issues, i don't want to have to roll the guards either. Thanks

Jason@Euro-Division · 11-15-2013, 05:18 PM

Hello,

The site info is wrong, it will be updated very soon with all right information.

For the 1 Series, GT-CR comes in 19x8.5 ET45 Front, 19x9.5 ET50 Rear.

This fitment is nice and flush for the 1 Series.

Prodigy. · 11-17-2013, 11:39 PM

Quote:

Originally Posted by Jason@Euro-Division

Hello,

The site info is wrong, it will be updated very soon with all right information.

For the 1 Series, GT-CR comes in 19x8.5 ET45 Front, 19x9.5 ET50 Rear.

This fitment is nice and flush for the 1 Series.

ok, thanks, im so tempted in a set..

What tyre size do you recommend without having the stretched look?

Jason@Euro-Division · 12-13-2013, 09:51 PM

Bump. Last shipping week for 2013!

1MOz · 12-14-2013, 12:01 AM

Quote:

Originally Posted by Jason@Euro-Division

Bump. Last shipping week for 2013!

Hi Jason,
Looking for a square set up 18" for my 1M, black color.

Can you let me know what choices are available?

How is gloss black and hyper black different?

What is the best tyre width for square set up, 255? I'll probably go with Hankook RS3.

Thanks, pm if you prefer.

Quang

froop · 12-16-2013, 01:59 AM

Hi Jason,

Is it possible to get the GT-CS wheels in 1 series offsets?

Curare86 · 12-16-2013, 04:26 AM

Quote:

Originally Posted by Jason@Euro-Division

Hi Simon,

At this stage, only a square setup is suitable for the 1 Series. With the 18x8.5 ET40, they're a pretty flush fitment on the E8x.

If you must go staggered, perhaps you can consider the GT-CX, also in 18".

Hope this helps.

Quote:

Originally Posted by froop

Hi Jason,

Is it possible to get the GT-CS wheels in 1 series offsets?

See above quote froopy

Jason@Euro-Division · 12-17-2013, 05:32 AM

Quote:

Originally Posted by 1MOz

Hi Jason,
Looking for a square set up 18" for my 1M, black color.

Can you let me know what choices are available?

How is gloss black and hyper black different?

What is the best tyre width for square set up, 255? I'll probably go with Hankook RS3.

Thanks, pm if you prefer.

Quang

Pm'ed.

Quote:

Originally Posted by froop

Hi Jason,

Is it possible to get the GT-CS wheels in 1 series offsets?

Its possible that we bring in GT-CS 18x8.5 ET40 Front, 18x9.5 ET45 Rears next year. However, with the ET45 Rear's on the E8x, we would recommend 245/35/18's as they are pretty flush. The GT-CX's ET50 rear fits 255's nicely.

froop · 12-17-2013, 06:59 AM

Thanks for the reply Jason. I love the look of the GT-CS wheels but if I were to get a second set of wheels I would definitely want them in proper 1 series performance offsets rather than stance offsets.

imske3000 · 02-04-2014, 06:45 PM

Hi Jason,

I just bought a 135i and looking for some guidance with new wheels, can you help me with that? i am thinking about 19s.

Jason@Euro-Division · 12-27-2014, 07:27 PM

Sale on Selected models starts today.

BMWhoarder · 12-28-2014, 03:26 AM

Quote:

Originally Posted by froop

Thanks for the reply Jason. I love the look of the GT-CS wheels but if I were to get a second set of wheels I would definitely want them in proper 1 series performance offsets rather than stance offsets.

i'd also be wanting the GT-CS in 19" 1series fitment. any chance of this happening?

_Ryan_ · 12-28-2014, 04:01 AM

Quote:

Originally Posted by Jason@Euro-Division

Sale on Selected models starts today.

Weights?

totti84 · 12-28-2014, 08:37 PM

So GTCX are the only 18inch option for E82 fitment?

Can I please get 18x8.5 + 18x9.5 offsets and weights for these?

Jason@Euro-Division · 12-28-2014, 11:05 PM

Quote:

Originally Posted by ba114

i'd also be wanting the GT-CS in 19" 1series fitment. any chance of this happening?

At this stage only GT-CR is available in 19" 1 Series Fitment. It is unlikely the CS will be available in E82 fitment.

Quote:

Originally Posted by _Ryan_

Weights?

18x8.5 is approximately 10.4kg, 18x9.5 is approximately 10.8kg

Quote:

Originally Posted by totti84

So GTCX are the only 18inch option for E82 fitment?

Can I please get 18x8.5 + 18x9.5 offsets and weights for these?

For 18" yes. With GT-CS, 18x8.5 all round is an option possible for the E82.

Chandon · 12-29-2014, 09:34 PM

Quote:

Originally Posted by totti84

So GTCX are the only 18inch option for E82 fitment?

Can I please get 18x8.5 + 18x9.5 offsets and weights for these?

Quote:

Originally Posted by Jason@Euro-Division

At this stage only GT-CR is available in 19" 1 Series Fitment. It is unlikely the CS will be available in E82 fitment.

18x8.5 is approximately 10.4kg, 18x9.5 is approximately 10.8kg

For 18" yes. With GT-CS, 18x8.5 all round is an option possible for the E82.

I have GT-CS in 18x8.5 all round, fits perfectly.

totti84 · 12-30-2014, 02:05 AM

Viciousgook - what offset are those? and what tyre sizes are you running front and rear? Looks awesome!

Chandon · 12-30-2014, 04:46 AM

Quote:

Originally Posted by totti84

Viciousgook - what offset are those? and what tyre sizes are you running front and rear? Looks awesome!

The sizes are 18x8.5 ET+40 all round with 225/40/18 and 255/35/18 tyres.

11-12-2013, 10:28 PM	#1
Jason@Euro-Division First Lieutenant 59 Rep 371 Posts Drives: BMW Join Date: Jan 2009 Location: Melbourne / Australia iTrader: (2)	GTC Wheels \| GT-CR \| GT-CX \| GT-CS 18"/19" Hello, We have all three popular wheels IN STOCK in various sizes, finishes etc. Fitment Notes for 1 Series: GT-CR = 19" Square or Staggered available GT-CX = 18" Square or Staggered available GT-CS = 19" Square or 18" Square available GT-CR Available Finishes - Hyper Silver - Matte Black - Matte Anthracite - Gloss Black - Hyper Black Available Sizes - 19x8.5 ET35 - 19x8.5 ET45 - 19x9.5 ET33 - 19x9.5 ET50 Fitted Photos GT-CS Available Finishes - Super Silver - Matte Black - Matte Anthracite Available Sizes - 18x8.5 ET40 - 18x9.5 ET33 - 19x8.5 ET40 - 19x8.5 ET20 - 19x10 ET25 - 19x10 ET38 Fitted Photos GT-CX Available Sizes - 18x8.5 ET35 - 18x8.5 ET45 - 18x9.5 ET50 - 18x9.5 ET33 - 19x8.5 ET20 - 19x8.5 ET35 - 19x9.5 ET33 - 19x9.5 ET22 Fitted Photos To place an order or any inquiries, please pm or email sales@eurodivision.com.au Payments via Bank Transfer or Paypal are accepted. Last edited by Jason@Euro-Division; 07-17-2016 at 07:01 PM..
	Appreciate 0 Tweet Quote

11-12-2013, 10:55 PM	#2
Simonnn Second Lieutenant 20 Rep 299 Posts Drives: 135i Join Date: Nov 2012 Location: Melbourne iTrader: (1)	Do you have GT-CS in a more 1 series friendly offset for the rears in 18x9.5? +33 is probably a bit too low
	Appreciate 0 Quote

11-13-2013, 05:03 AM	#4
aus135i Captain 27 Rep 828 Posts Drives: F80 M3 Join Date: Sep 2008 Location: SYD iTrader: (0)	Jason which 19" can fit on a M135i? and what size rubber would those be running? Cheers __________________ GONE: E82,E83,K46,1199s,RS250,F20,F25,F82,Cayenne,G83 NOW: G07, G20, K66
	Appreciate 0 Quote

11-15-2013, 07:08 AM	#5
Prodigy. Lieutenant Colonel 698 Rep 1,514 Posts Drives: ///M2 Join Date: Jun 2010 Location: Australia iTrader: (0)	Jason can you confirm the width and offsets on the 19" GT-CR please. I was looking at the GTC website and it states the width as 9.0. http://gtcwheels.com/genntech-cr.html Looking for the best staggered fitment for an e82 with minimum tyre stretch and no rubbing issues, i don't want to have to roll the guards either. Thanks
	Appreciate 0 Quote

11-15-2013, 05:18 PM	#6
Jason@Euro-Division First Lieutenant 59 Rep 371 Posts Drives: BMW Join Date: Jan 2009 Location: Melbourne / Australia iTrader: (2)	Hello, The site info is wrong, it will be updated very soon with all right information. For the 1 Series, GT-CR comes in 19x8.5 ET45 Front, 19x9.5 ET50 Rear. This fitment is nice and flush for the 1 Series.
	Appreciate 0 Quote

12-13-2013, 09:51 PM	#8
Jason@Euro-Division First Lieutenant 59 Rep 371 Posts Drives: BMW Join Date: Jan 2009 Location: Melbourne / Australia iTrader: (2)	Bump. Last shipping week for 2013!
	Appreciate 0 Quote

12-16-2013, 01:59 AM	#10
froop Colonel 171 Rep 2,682 Posts Drives: 08 AW 6MT E82 Join Date: Jul 2012 Location: Sydney, Australia iTrader: (3)	Hi Jason, Is it possible to get the GT-CS wheels in 1 series offsets? __________________ froop's AW 135i Build Thread
	Appreciate 0 Quote

12-17-2013, 06:59 AM	#13
froop Colonel 171 Rep 2,682 Posts Drives: 08 AW 6MT E82 Join Date: Jul 2012 Location: Sydney, Australia iTrader: (3)	Thanks for the reply Jason. I love the look of the GT-CS wheels but if I were to get a second set of wheels I would definitely want them in proper 1 series performance offsets rather than stance offsets. __________________ froop's AW 135i Build Thread
	Appreciate 0 Quote

02-04-2014, 06:45 PM	#14
imske3000 Second Lieutenant 20 Rep 228 Posts Drives: AW 1M Join Date: Feb 2014 Location: Sydney iTrader: (1)	Hi Jason, I just bought a 135i and looking for some guidance with new wheels, can you help me with that? i am thinking about 19s.
	Appreciate 0 Quote

12-27-2014, 07:27 PM	#15
Jason@Euro-Division First Lieutenant 59 Rep 371 Posts Drives: BMW Join Date: Jan 2009 Location: Melbourne / Australia iTrader: (2)	Sale on Selected models starts today.
	Appreciate 0 Quote

12-28-2014, 08:37 PM	#18
totti84 Major 112 Rep 1,140 Posts Drives: N54 135i 6MT Join Date: Aug 2014 Location: Sydney, Australia iTrader: (5) Garage List 2009 BMW 135i M Sport [0.00]	So GTCX are the only 18inch option for E82 fitment? Can I please get 18x8.5 + 18x9.5 offsets and weights for these?
	Appreciate 0 Quote

12-30-2014, 02:05 AM	#21
totti84 Major 112 Rep 1,140 Posts Drives: N54 135i 6MT Join Date: Aug 2014 Location: Sydney, Australia iTrader: (5) Garage List 2009 BMW 135i M Sport [0.00]	Viciousgook - what offset are those? and what tyre sizes are you running front and rear? Looks awesome!
	Appreciate 0 Quote