1/4 mile question using COBB AP

[matacuero]

Are there any 135s using COBB AP who have gone into the very low 12s or broken into the 11s in the 1/4 withouth using Meth? I know that's a lot to ask but I am wondering. I read here and talk to a few knowledgable folks who feel COBB is pretty close to JB4 in power. But I really haven't seen any good results from anyone.

My plan is to get as quick as possible without using METH and Only using 93 octane (no race gas). I am FBO on a 2009 135. I don't have drag radials but have decent R1s for the rear. Any input on what I would run or any input on what I would dyno. I would love 400rwhp but I know that maybe out of my league. Thanks for your input guys.

Jorge

[ragingpanda]

There are a couple, here is one from way back in February when race maps weren't even available: http://www.1addicts.com/forums/showthread.php?t=644020

[Southjersey128]

My friend has a 335xi that he ran 12.2 119mph with a helix intercooler, downpipes, Cobb, and 100 octane. 55 degree night at Atco raceway nj. I would have to think with the weight of the 135 with these mods should be .3 faster. It would have to be with drag radials though. They're key.

[Drawn05]

I have run a 12.525 @ 113mph with FBO (no meth/race fuel) and Cobb 402 aggressive maps.

[DRedman45]

I'm excited to find out how I'll be able to run next season with a similar set up...maybe with an e85 mix map 11s will be easier to hit 11s, or with a protune

[matacuero]

Thanks for all the input. I plan on running at Budd's Creek in the next test and tune day I believe 2nd week in Nov. Will post results.

[ragingpanda]

Originally Posted by matacuero

Thanks for all the input. I plan on running at Budd's Creek in the next test and tune day I believe 2nd week in Nov. Will post results.

Are you going to be protuned by the time you run at the dragstrip?

Here is a thread I made for a friend of mine that ran at the dragstrip last night with Cobb's OTS E30 map with minor mods: http://www.1addicts.com/forums/showthread.php?t=764832