***New 1M/M1 Render Frontal view sporting its new bumper***

Alpin3_F30 · 08-29-2010, 07:53 PM

As featured on 1ADDICTS HOMEPAGE.

Its been a while but here i am back at my old game of photoshop. i took the little that was shown to us and tried my best to make out the rest and came up with this final production frontal view of the new 1M/M1. hope you like and enjoy. By the way i will keep updating the pic as we see newer photos of parts revealed, i dont want to keep guessing of what it may look like, so far this is what ive seen and have been told by SCOTT so keep up with this post and you'll see updated parts. as for the rear this is as much as i can make out so ill update that once we get more skin showing from under that car cover.

Once again please do not photoshop over these pictures. Thank You
High Quality Photo links incase you want to save them as wallpaper.

Smokey · 08-29-2010, 07:58 PM

Looks very aggressive

But can you do the side and rear profile-- I know it's kinda hard since all the details are not yet out? I wonder if the hood has vents-- the partially revealed car seems to indicate this. Anyways, good job on the chop.

Jaguar66 · 08-29-2010, 08:08 PM

Quote:

Originally Posted by Smokey

Looks very aggressive

But can you do the side and rear profile-- I know it's kinda hard since all the details are not yet out? I wonder if the hood has vents-- the partially revealed car seems to indicate this. Anyways, good job on the chop.

I have studied all the images, and I see no evidence of hood vents or a power bulge. There will be side vents similar to an M3, plus vents aft of the front wheel well. I would also add a carbon fiber roof, deleting the sun roof.

If one considers that these 2 images have a different perspective, I think it is darn close. Maybe the front spoiler need to go lower to the ground?

BForbes · 08-29-2010, 08:12 PM

You're brave, Alpine. Something looks a bit off in the front but it looks great for what we've seen so far! Thanks. :-) By off I mean it looks a bit small in the front. I think it could be larger. We'll see soon enough.

WULFFZA · 08-29-2010, 08:20 PM

Getting closer...
great photoshop skills

Mprofiler · 08-29-2010, 08:49 PM

Looks pretty similar to what I imagine also except I think the fenders might be a bit too wide or the lower part of the bumper not wide enough? And could you also add in the cf roof? Thanks.

datbimmerdoe · 08-29-2010, 09:56 PM

mad skills, looks great!

Smokey · 08-29-2010, 09:59 PM

Quote:

Originally Posted by RobMason

I have studied all the images, and I see no evidence of hood vents or a power bulge. There will be side vents similar to an M3, plus vents aft of the front wheel well. I would also add a carbon fiber roof, deleting the sun roof.

If one considers that these 2 images have a different perspective, I think it is darn close. Maybe the front spoiler need to go lower to the ground?

I was actually referring to this picture,where one of the members pointed out that they might be covering something up, but the side by side pix you posted suggest that it might just be the line(s) on the hood:

Alpin3_F30 · 08-29-2010, 11:39 PM

Quote:

Originally Posted by RobMason

I have studied all the images, and I see no evidence of hood vents or a power bulge. There will be side vents similar to an M3, plus vents aft of the front wheel well. I would also add a carbon fiber roof, deleting the sun roof.

If one considers that these 2 images have a different perspective, I think it is darn close. Maybe the front spoiler need to go lower to the ground?

you know what i actually forgot that the M's are a bit lower it does look too high ill drop it a bit and slant the side vents down a tad and then it should look right. good eye thanks

HERR FSTIR · 08-29-2010, 11:49 PM

The top of the fender is not concave enough. Compare to the partially revealed photo. The concavity of the fender really accentuates the flared appearance. Also dropping the car should help a bit.

Boxtyp3 · 08-29-2010, 11:52 PM

I think the slope on the fenders on your work is a bit too straight. The one on the real thing is kind of curved outward. Great job though.

Alpin3_F30 · 08-30-2010, 12:11 AM

Quote:

Originally Posted by HERR FSTIR

The top of the fender is not concave enough. Compare to the partially revealed photo. The concavity of the fender really accentuates the flared appearance. Also dropping the car should help a bit.

just fixed it i must have been in a rush because i didnt even realize how straight the fenders were. thanks for the tip

sleeper001 · 08-30-2010, 12:21 AM

very nice can't wait

Shinobi · 08-30-2010, 04:19 AM

Great work as always, Alpine

. Now, how bout slappin on a CF roof up there to see what that would look like.

SCOTT26 · 08-30-2010, 09:43 AM

You still have not completed the M5 yet? (Wheels , mirrors)

Lower the car and increase the depth of the intakes. flare the bonnet some more so it is not as flat as the standard car. And add the Reinforced Carbon Fibre roof.

Itanius · 08-30-2010, 09:52 AM

Quote:

Originally Posted by SCOTT26

Lower the car and increase the depth of the intakes. flare the bonnet some more so it is not as flat as the standard car. And add the Reinforced Carbon Fibre roof.

More hints... nice!

niuniu · 08-30-2010, 10:33 AM

Quote:

Originally Posted by SCOTT26

You still have not completed the M5 yet? (Wheels , mirrors)

Lower the car and increase the depth of the intakes. flare the bonnet some more so it is not as flat as the standard car. And add the Reinforced Carbon Fibre roof.

cncmastr · 08-30-2010, 11:14 AM

Looks great! but the front middle, larger intake crease goes all the way to the top of the bumper. Look at the crease behind the tarp.

Alpin3_F30 · 08-30-2010, 01:24 PM

Quote:

Originally Posted by SCOTT26

You still have not completed the M5 yet? (Wheels , mirrors)

Lower the car and increase the depth of the intakes. flare the bonnet some more so it is not as flat as the standard car. And add the Reinforced Carbon Fibre roof.

Actually i stopped with the M5 kinda got tired of seeing nothing new...i want to see the rear bumper so i put the M5 photoshopping aside for now..as for the M1/1M. you said the bonnet is flared how? the lines are spread outward? or the middle is buldged a bit to fit the engine? also i did have a CF roof on it before i posted the photo but i wasnt sure of it but now i know. thanks for the tips.

HondaGoneRogue · 08-30-2010, 02:04 PM

Also, the oil/brake-cooler intake's bottom lip needs angled down toward the left (towards the mouth) more. I think it would happen naturally if you pull the main opening of the bumper open more. Awesome chop tho!!

02fireman · 08-30-2010, 02:21 PM

Yeah, it kinda looks like the main intercooler opening eats into the top of the bumper a bit making the bumper thinner on top.

niuniu · 08-30-2010, 02:26 PM

Alpine you are a superb renderer. Assume you're a pro and get paid for this in one industry or another.

08-29-2010, 07:53 PM	#1
Alpin3_F30 Euro.Techniks-EAST 291 Rep 1,467 Posts Drives: 2015 F30 328i Join Date: Jan 2007 Location: Harrison,NJ iTrader: (1)	*New 1M/M1 Render Front & Rear views sporting its new bumpers* As featured on 1ADDICTS HOMEPAGE. Its been a while but here i am back at my old game of photoshop. i took the little that was shown to us and tried my best to make out the rest and came up with this final production frontal view of the new 1M/M1. hope you like and enjoy. By the way i will keep updating the pic as we see newer photos of parts revealed, i dont want to keep guessing of what it may look like, so far this is what ive seen and have been told by SCOTT so keep up with this post and you'll see updated parts. as for the rear this is as much as i can make out so ill update that once we get more skin showing from under that car cover. Once again please do not photoshop over these pictures. Thank You High Quality Photo links incase you want to save them as wallpaper. Last edited by Alpin3_F30; 09-03-2010 at 04:16 PM..
	Appreciate 0 Tweet Quote

08-29-2010, 07:58 PM	#2
Smokey Lucky Lefty 45 Rep 746 Posts Drives: on twisty roads Join Date: Aug 2007 Location: * iTrader: (0) Garage List 2019 BMW M2 Comp [0.00] 2017 Porsche Macan GTS [8.00] 2011 M3 [10.00] 2013 bmw F25 msport [10.00] 2011 335iS [9.60]	Looks very aggressive But can you do the side and rear profile-- I know it's kinda hard since all the details are not yet out? I wonder if the hood has vents-- the partially revealed car seems to indicate this. Anyways, good job on the chop. __________________ The Power of M
	Appreciate 0 Quote

08-29-2010, 08:12 PM	#4
BForbes Moderator 557 Rep 4,240 Posts Drives: BSM 135i/AW E90 M3 Join Date: Feb 2007 Location: Orlando, FL iTrader: (0)	You're brave, Alpine. Something looks a bit off in the front but it looks great for what we've seen so far! Thanks. :-) By off I mean it looks a bit small in the front. I think it could be larger. We'll see soon enough. __________________ - 04 Honda S2000(gone)
	Appreciate 0 Quote

08-29-2010, 08:20 PM	#5
WULFFZA Lieutenant 42 Rep 448 Posts Drives: 2011 335i MSport / 2012 X5 35d Join Date: Apr 2010 Location: SoCal iTrader: (0)	Getting closer... great photoshop skills __________________ 2011 E90 335i M-Sport 6MT Alpine white - saddle brown 2012 E70 X5 35d Sport Activity - Alpine white - black 2005 Toyota 4Runner 4WD Sport Edition Silver
	Appreciate 0 Quote

08-29-2010, 08:49 PM	#6
Mprofiler Second Lieutenant 54 Rep 204 Posts Drives: audi Join Date: Jul 2010 Location: Cali iTrader: (0)	Looks pretty similar to what I imagine also except I think the fenders might be a bit too wide or the lower part of the bumper not wide enough? And could you also add in the cf roof? Thanks. Last edited by Mprofiler; 08-29-2010 at 09:19 PM..
	Appreciate 0 Quote

08-29-2010, 09:56 PM	#7
datbimmerdoe Lieutenant General 1265 Rep 17,493 Posts Drives: like I'M BOUT THAT LIFE Join Date: Jul 2008 Location: PARADISE aka CANES COUNTRY iTrader: (0)	mad skills, looks great! __________________ #datbimmerdoe #thatbimmertho FOLLOW @datbimmerdoe on INSTAGRAM
	Appreciate 0 Quote

08-29-2010, 11:49 PM	#10
HERR FSTIR Captain 119 Rep 771 Posts Drives: LBB M2C, VO 1M, GSA 1200 Join Date: Sep 2007 Location: Frozen Tundra iTrader: (0) Garage List 2021 BMW X3M Compet ... [0.00] 2019 BMW S1000R [0.00] 2019 M2 Competition [0.00] 2018 BMW 1200 GSA [0.00] 2011 1M Coupe [9.75]	The top of the fender is not concave enough. Compare to the partially revealed photo. The concavity of the fender really accentuates the flared appearance. Also dropping the car should help a bit. Attached Images
	Appreciate 0 Quote

08-29-2010, 11:52 PM	#11
Boxtyp3 Major 78 Rep 1,353 Posts Drives: 2015 F32 MG Join Date: Apr 2010 Location: SF Bay Area iTrader: (0) Garage List 2015 F32 435 [0.00] 2002 E46 cp [0.00] 2010 E82 135i [0.00] 2013 E92 335i [0.00]	I think the slope on the fenders on your work is a bit too straight. The one on the real thing is kind of curved outward. Great job though.
	Appreciate 0 Quote

08-30-2010, 12:21 AM	#13
sleeper001 Private 25 Rep 59 Posts Drives: 2011 135i Past, 2017 X5M-sport Join Date: Jul 2010 Location: South Florida iTrader: (0)	very nice can't wait
	Appreciate 0 Quote

08-30-2010, 04:19 AM	#14
Shinobi Addicted to AutoX 17 Rep 171 Posts Drives: Modded e46 Join Date: Dec 2005 Location: Irvine iTrader: (0)	Great work as always, Alpine . Now, how bout slappin on a CF roof up there to see what that would look like. __________________
	Appreciate 0 Quote

08-30-2010, 09:43 AM	#15
SCOTT26 Major General 5306 Rep 5,824 Posts Drives: A big F-off German Truck. Join Date: Jan 2007 Location: WORLDWIDE iTrader: (0)	You still have not completed the M5 yet? (Wheels , mirrors) Lower the car and increase the depth of the intakes. flare the bonnet some more so it is not as flat as the standard car. And add the Reinforced Carbon Fibre roof.
	Appreciate 0 Quote

08-30-2010, 11:14 AM	#18
cncmastr Colonel 1579 Rep 2,406 Posts Drives: E30 M3 Cecotto, F85, G05, G07, Join Date: Mar 2006 Location: Outside Atlanta iTrader: (3) Garage List 2018 X5 M [0.00] 2020 M2 CS [0.00] 2005 BMW X5 4.8is [0.00] 2006 BMW M3 [0.00]	Looks great! but the front middle, larger intake crease goes all the way to the top of the bumper. Look at the crease behind the tarp. __________________
	Appreciate 0 Quote

08-30-2010, 02:04 PM	#20
HondaGoneRogue They like my Swag... 433 Rep 3,762 Posts Drives: 15 GSM 435i GC Join Date: Aug 2008 Location: South Dakota iTrader: (4) Garage List 2015 435i Gran Coupe [0.00]	Also, the oil/brake-cooler intake's bottom lip needs angled down toward the left (towards the mouth) more. I think it would happen naturally if you pull the main opening of the bumper open more. Awesome chop tho!! __________________ 2015 435i Gran Coupe - Current 2008 AW 135i - Sold
	Appreciate 0 Quote

08-30-2010, 02:21 PM	#21
02fireman Second Lieutenant 7 Rep 294 Posts Drives: Twistys Join Date: Jun 2008 Location: Central Fl. iTrader: (0)	Yeah, it kinda looks like the main intercooler opening eats into the top of the bumper a bit making the bumper thinner on top. __________________ Z4M Coupe 6MT Monaco Blue #13/36 ...Keeper... Z4 3.0 6MT ...Keeper... 2OO2 5MT ...Keeper... 335i 6MT Montego Blue M-Sport (Retired),X535d Vermillion Red/Saddle (Retired)
	Appreciate 0 Quote

08-30-2010, 02:26 PM	#22
niuniu NO DOGMA 11 Rep 207 Posts Drives: baby bimmer Join Date: Aug 2010 Location: UK iTrader: (0)	Alpine you are a superb renderer. Assume you're a pro and get paid for this in one industry or another. __________________
	Appreciate 0 Quote

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search