|
|
|
05-03-2013, 02:52 AM | #1 |
Private
12
Rep 74
Posts |
1m shocks/springs on 135i?
Has anyone put the 1M springs and dampers on the 135i?
Considering, all the aluminum suspension bits are swappable wouldn't the 1M springs and shocks be a great setup? (the rear would require the m rear lower camber links to fit the M rear shocks) Also, how would the 1M spring rates and ride height compare to the BMW Performance yellow springs? I know similar topics have been discussed thoroughly, but I haven't seen posts about 1M springs/dampers on the 135i. Thanks in advance for everyones input! |
05-03-2013, 04:47 AM | #2 |
Colonel
171
Rep 2,682
Posts |
I asked this question only just today in the Ohlins R&T thread directly below. It was quite thoroughly answered by hpautowerks.
__________________
|
Appreciate
0
|
05-03-2013, 11:47 AM | #3 |
Private
12
Rep 74
Posts |
Thanks, I'll be sure to check it out...
Follow up: So it's clear that the front shocks would need the 1M spindle to mount. So it is unlikely anyone would ever change all four spindles just to get the 1M shocks and springs on a 135i, but this still leaves the question of 1M springs on a 135i. Does anyone know the front/rear spring rate of the 1M springs? 135i spring rate: • Front: 120 lb/in • Rear : 350 lb/in 135i Performance yellow spring rate: • Front: 160 lb/in • Rear : 420 lb/in *Thanks Gary for the correct specs 1M spring rate?: Would the 1M springs match well with Koni adjustable yellow sport shocks? Perhaps, this combo is a better match than yellow springs and koni adjustable shocks? Thanks again for everyones input. Last edited by jbv; 05-03-2013 at 11:18 PM.. Reason: Follow up data after reading other posts. |
Appreciate
0
|
05-04-2013, 07:03 PM | #4 |
Colonel
37
Rep 2,084
Posts |
Unless BMW changed it, I don't think the Performance spring rates are that high. Someone measured them a few years ago at 160/420, which agrees in the front with the BMW advertising that says 33% more than stock.
...adding: I remember now, the figures you posted are the 3-series Performance springs. |
Appreciate
0
|
05-04-2013, 07:08 PM | #5 |
European Editor
10539
Rep 22,992
Posts |
FYI... 1M rear shocks won't fit on a 135i bc they mount differently to the 1M/M3's rear control arms.
__________________
|
Appreciate
0
|
05-05-2013, 05:31 AM | #6 |
Lieutenant
57
Rep 552
Posts |
|
Appreciate
0
|
05-14-2013, 03:09 PM | #7 |
Supreme Allied Commander
3843
Rep 54,362
Posts
Drives: F80 M3
Join Date: Mar 2007
Location: Santa Barbara, AP, Brembo, GIAC, Koni, Ohlins, Performance Friction, www.hpautosport.com
|
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|