|
|
|
11-16-2011, 10:21 AM | #1 |
Private
3
Rep 61
Posts |
FS: KW V3's and Vorshlag Camber plates
I prefer so-cal pick up. PM for info. Shipping is additional and depends on location. 1) KW V3 coilovers in original box with all instructions and adjustment tools. After removal, I set them to middle of damper settings: $1300 2) Vorshlag camber/caster plates for stock springs also works with KW V3 kit. Comes with new upper spring perches and bearings $300 3) Track braking upgrade, good stopping power for the whole session. HAWK HT10 racing front and rear pads with 24.5mm stock front discs to swap in for track duty then swap back to stock to keep it quiet. I won't lie, they make noise but they stop NOW! No fade for the whole session. I put and 2sets of new caliper guide pins. Plenty of wear left. Pads are at> Front LF inner 9mm/outer 8mm. RF inner 9mm/outer 8mm Rear LF inner 9mm/outer 9mm. RF inner 8.5mm/outer 8.5mm Front and rear with front discs; $300 |
11-22-2011, 07:35 PM | #5 |
Private
3
Rep 61
Posts |
20K on the camber plates. I just replaced the spring hats and bearings and they have 0 miles.
As for the V3's, PM an address to ship them to and I'll find out how much it will cost you. |
Appreciate
0
|
Post Reply |
Bookmarks |
|
|