Adjust the moonroof on a 135i (E82)

LS12GO · 08-31-2016, 05:43 PM

I noticed the other day that the back of my moon roof sits a 1/4 inch below the roofline. There is no leaking as of yet but winter is around the corner. Does anyone how to adjust the height? I saw a couple of YouTube videos on older E39's but nothing for a E82 (135i) 2012.

Thanks

anglocanadian · 09-01-2016, 05:36 PM

Are you sure its in the full "park" position ?

iEuropa · 09-02-2016, 02:12 PM

Quote:

Originally Posted by anglocanadian

Are you sure its in the full "park" position ?

Almost certain this is the issue.

Kazeka6e · 09-05-2016, 08:41 AM

Sounds like it needs calibrating. Mine was like this as well and I was worried something had broken. Just press and hold the vent position button. The sunroof should vent, and then close and then open itself completely and then close again. Do not let go of the button until it's finished. Entire process takes about a minute. You will get a sunroof error while it's doing the calibrating but just cycle the key after it's finished and it should go away. Hope this helps!

08-31-2016, 05:43 PM	#1
LS12GO Registered 0 Rep 3 Posts Drives: 2012 135i w/M Sport Pkg Join Date: May 2015 Location: Massillon Ohio iTrader: (0)	Adjust the moonroof on a 135i (E82) I noticed the other day that the back of my moon roof sits a 1/4 inch below the roofline. There is no leaking as of yet but winter is around the corner. Does anyone how to adjust the height? I saw a couple of YouTube videos on older E39's but nothing for a E82 (135i) 2012. Thanks
	Appreciate 0 Tweet Quote

09-01-2016, 05:36 PM	#2
anglocanadian Private First Class 69 Rep 166 Posts Drives: 2013 135i M Sport Edition Join Date: Dec 2014 Location: Oshawa Ontario iTrader: (1)	Are you sure its in the full "park" position ?
	Appreciate 0 Quote

09-05-2016, 08:41 AM	#4
Kazeka6e BMW GENIUS 9 Rep 52 Posts Drives: 2009 128i Monaco Blue Join Date: Aug 2013 Location: Southern Oregon iTrader: (1) Garage List 2004 BMW M3 [0.00] 2009 BMW 128I [0.00]	Sounds like it needs calibrating. Mine was like this as well and I was worried something had broken. Just press and hold the vent position button. The sunroof should vent, and then close and then open itself completely and then close again. Do not let go of the button until it's finished. Entire process takes about a minute. You will get a sunroof error while it's doing the calibrating but just cycle the key after it's finished and it should go away. Hope this helps!
	Appreciate 0 Quote