Water/Methanol injection info thread

JB4-335 · 06-14-2011, 02:21 AM

Did you get a meth kit Richard?
If so which one?

Orlin · 06-14-2011, 02:29 AM

Yeh, Kenny had Adrian's help with the install I think so thats why his was more of a set it and forget it type of meth kit. I often log for Terry in order to make sure that all is working as it should be and I will be doing the same once I get meth. We are on our own up here in QLD

BBK · 06-14-2011, 02:32 AM

Quote:

Originally Posted by JB4135

Did you get a meth kit Richard?
If so which one?

Maybe....

Went with the integrated 2.2gal tank VC2 kit. For some reason it's starting to get a lot more complicatd than I thought! What actually has to be done to connect it to the JB4? Maybe I will email Terry about it and see if there is step by step instructions...

MrBlonde · 06-14-2011, 02:38 AM

Richard I'd guess it's about 4 hours labour?

JB4-335 · 06-14-2011, 02:38 AM

I'm on my own here in Sydney too but I think I know enough about meth to install and setup without too much drama. If a couple of us do buy together we can use each others knowledge to put it all together and share our experiences with each other. Three heads are better than one. You meth boys know who you are.

MrBlonde · 06-14-2011, 02:39 AM

I had Adrian from Vishnu go to my workshop and work with Dale and Peter at Advan to install and configure the methanol system. It's a piece of piss but I wanted to make sure it was all hunky dory.

JB4-335 · 06-14-2011, 02:42 AM

Quote:

Originally Posted by BBK

Quote:

Originally Posted by JB4135

Did you get a meth kit Richard?
If so which one?

Maybe....

Went with the integrated 2.2gal tank VC2 kit. For some reason it's starting to get a lot more complicatd than I thought! What actually has to be done to connect it to the JB4? Maybe I will email Terry about it and see if there is step by step instructions...

Congrats mate. FSB or Flow Sensor or both? One of the VC2 wires connects it to the JB4. I think it was small orange.
Have a look at the Coolingmist diagram.

BMW86 · 06-14-2011, 02:49 AM

Quote:

Originally Posted by BBK

Maybe....

Went with the integrated 2.2gal tank VC2 kit. For some reason it's starting to get a lot more complicatd than I thought! What actually has to be done to connect it to the JB4? Maybe I will email Terry about it and see if there is step by step instructions...

Nice choice. IMHO, best setup if you're not going with under hood version.

BBK · 06-14-2011, 02:52 AM

FSB.

Terry is going to email me some info so hopefully it goes according to plan. Won't happen till next week anyway.

JB4-335 · 06-14-2011, 02:53 AM

Quote:

Originally Posted by BBK

FSB.

Terry is going to email me some info so hopefully it goes according to plan. Won't happen till next week anyway.

Awesome. Nice choice Richard

BMW86 · 06-14-2011, 02:57 AM

Quote:

Originally Posted by BBK

FSB.

Terry is going to email me some info so hopefully it goes according to plan. Won't happen till next week anyway.

You'll be in the 11s next week?

Orlin · 06-14-2011, 03:31 AM

Quote:

Originally Posted by BBK

FSB.

Terry is going to email me some info so hopefully it goes according to plan. Won't happen till next week anyway.

you will be ok Richard, just remember like the old man off spiderman says..."with great power comes great responsibility".

JB4-335 · 06-14-2011, 03:51 AM

Quote:

Originally Posted by Orlin

you will be ok Richard, just remember like the old man off spiderman says..."with great power comes great responsibility".

MrBlonde · 06-14-2011, 04:06 AM

I suggest a new thread for "JuiceBox Methanol kit installation and configuration"

BBK · 06-14-2011, 05:34 AM

Quote:

Originally Posted by BMW86

You'll be in the 11s next week?

Don't think so vin! No other mods and run flats... hoping just to get a 12.5

BMW86 · 06-14-2011, 07:24 AM

Quote:

Originally Posted by BBK

Don't think so vin! No other mods and run flats... hoping just to get a 12.5

Your 12.8 on run-flats was awesome! We'll see how you go though, hopefully you can still manage decent 60fts.

JB4-335 · 06-17-2011, 04:44 PM

First alpha install of the under hood meth kit just done by T.
This is it boys.
The time has come.

Orlin · 06-17-2011, 05:20 PM

Quote:

Originally Posted by JB4135

First alpha install of the under hood meth kit just done by T.
This is it boys.
The time has come.

woohoooo!

BMW86 · 06-17-2011, 07:51 PM

mcmn · 06-17-2011, 11:41 PM

Quote:

Originally Posted by JB4135

I'm on my own here in Sydney too but I think I know enough about meth to install and setup without too much drama.

Hi mate,

I'd be in on this, looking for something stealthy perhaps a under bonnet kit?

Paul

JB4-335 · 06-17-2011, 11:46 PM

Quote:

Originally Posted by mcmn

Hi mate,

I'd be in on this, looking for something stealthy perhaps a under bonnet kit?

Paul

Great. We'll add you to the list.
That's 4 people that want this kit.

Orlin · 06-17-2011, 11:50 PM

Quote:

Originally Posted by JB4135

Great. We'll add you to the list.
That's 4 people that want this kit.

I hope your getting us all a big discount Edwin

06-14-2011, 02:21 AM	#89
JB4-335 Brigadier General 168 Rep 3,093 Posts Drives: E92 BSM & E70 AW Join Date: Feb 2011 Location: Australia iTrader: (1)	Did you get a meth kit Richard? If so which one?
	Appreciate 0 Quote

06-14-2011, 02:29 AM	#90
Orlin Major 44 Rep 1,359 Posts Drives: F30 335i Join Date: Feb 2009 Location: Brisbane, Australia iTrader: (1)	Yeh, Kenny had Adrian's help with the install I think so thats why his was more of a set it and forget it type of meth kit. I often log for Terry in order to make sure that all is working as it should be and I will be doing the same once I get meth. We are on our own up here in QLD
	Appreciate 0 Quote

06-14-2011, 02:38 AM	#92
MrBlonde Colonel 122 Rep 2,695 Posts Drives: Audi TTRS, M Coupe, 1299 Join Date: Jan 2008 Location: Merewether iTrader: (0)	Richard I'd guess it's about 4 hours labour? __________________ .-=[ Kenny ]=-. 1999 BMW M Coupe 10.775 @ 134.35 mph w/1.600 60' (Best 136.07 mph) 25th August 2004. +2010 X5 35D+ Check out the 1Addicts Drag Racing Standings and Drag Racing 101.
	Appreciate 0 Quote

06-14-2011, 02:38 AM	#93
JB4-335 Brigadier General 168 Rep 3,093 Posts Drives: E92 BSM & E70 AW Join Date: Feb 2011 Location: Australia iTrader: (1)	I'm on my own here in Sydney too but I think I know enough about meth to install and setup without too much drama. If a couple of us do buy together we can use each others knowledge to put it all together and share our experiences with each other. Three heads are better than one. You meth boys know who you are.
	Appreciate 0 Quote

06-14-2011, 02:39 AM	#94
MrBlonde Colonel 122 Rep 2,695 Posts Drives: Audi TTRS, M Coupe, 1299 Join Date: Jan 2008 Location: Merewether iTrader: (0)	I had Adrian from Vishnu go to my workshop and work with Dale and Peter at Advan to install and configure the methanol system. It's a piece of piss but I wanted to make sure it was all hunky dory. __________________ .-=[ Kenny ]=-. 1999 BMW M Coupe 10.775 @ 134.35 mph w/1.600 60' (Best 136.07 mph) 25th August 2004. +2010 X5 35D+ Check out the 1Addicts Drag Racing Standings and Drag Racing 101.
	Appreciate 0 Quote

06-14-2011, 02:52 AM	#97
BBK Banned 87 Rep 3,070 Posts Drives: A boring one... Join Date: Oct 2008 Location: Australia iTrader: (0) Garage List 2009 BMW 135i [5.76]	FSB. Terry is going to email me some info so hopefully it goes according to plan. Won't happen till next week anyway.
	Appreciate 0 Quote

06-14-2011, 04:06 AM	#102
MrBlonde Colonel 122 Rep 2,695 Posts Drives: Audi TTRS, M Coupe, 1299 Join Date: Jan 2008 Location: Merewether iTrader: (0)	I suggest a new thread for "JuiceBox Methanol kit installation and configuration" __________________ .-=[ Kenny ]=-. 1999 BMW M Coupe 10.775 @ 134.35 mph w/1.600 60' (Best 136.07 mph) 25th August 2004. +2010 X5 35D+ Check out the 1Addicts Drag Racing Standings and Drag Racing 101.
	Appreciate 0 Quote

06-17-2011, 04:44 PM	#105
JB4-335 Brigadier General 168 Rep 3,093 Posts Drives: E92 BSM & E70 AW Join Date: Feb 2011 Location: Australia iTrader: (1)	First alpha install of the under hood meth kit just done by T. This is it boys. The time has come.
	Appreciate 0 Quote

06-17-2011, 07:51 PM	#107
BMW86 Major General 398 Rep 9,156 Posts Drives: RS3 Sedan / Macan S Join Date: Jul 2008 Location: Australia iTrader: (0)
	Appreciate 0 Quote

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search