|
|
|
06-23-2018, 07:59 PM | #1 |
Private
29
Rep 81
Posts |
What size R888R
What size R888R fit? I know they run wide so looking for feedback please.
Wheels: Front 8.5 45 offset Rear 9.5 55 offset I haven’t rolled arches etc Approx 10mm lowered |
06-23-2018, 10:08 PM | #2 |
Colonel
232
Rep 2,643
Posts |
Depends if you have camber plates. With stock camber you would only fit 225/40r18 front and 255/35r18 rear. With camber plates set for the track you can go with 235/40r18 front after a 3~5mm front spacer is fitted. Some coilovers may need a larger spacer depending on the springs used.
When you set maximum -ve camber on the rear, the 255/35 tire will rub the fuel filler tube at full compression. So a 3mm rear spacer will reduce or solve the rubbing. If you are really serious you may be able to fit 245/40 front and 265/35 rear. It will need fender mods, larger spacers and still have some rubbing in a couple of places. Last edited by John_01; 06-23-2018 at 11:41 PM.. |
Appreciate
0
|
06-24-2018, 06:22 PM | #4 |
Colonel
232
Rep 2,643
Posts |
If you can, I recommend get front camber plates for the track use. Limited camber will burn up the outside edge of the front tires. Maybe you know this already.
|
Appreciate
0
|
Post Reply |
Bookmarks |
Thread Tools | Search this Thread |
|
|