Moto GP frontlip by Lightweight Titanauspuffanlagen

[l888apex]

I'm sold at that price

[chrisN]

i dont have a 1M, but this is my favourite lip for it BY FAR

[ozinaldo]

Originally Posted by ///M1

Is it safe to assume you cannot run this lip together with the Alpha-N splitters?

Interesting idea. Even if the smallest one fits together with the "fangs" I am not sure if they will look better or worse, need to see this done or rendered to decide.

[Dackelone]

Some close up pics of this front lip - a different design though - on the Safety Car. Photos were taken at the Hockenheim Tuner Grand Prix...

















more pics here...


BIMMERPOST Tuner Wars Grand Prix Coverage - Hockenheimring, Germay
http://www.e90post.com/forums/showthread.php?t=698006

[Fuchsröhre]

Originally Posted by firechicken99

while I did see the seller post that note, I have to completely disagree.

If you look at each piece, you can see VERY obvious differences between the shape and size between the back edges of each.

To top it off, lets even go simpler.... Use the tiles and grout lines for reverence. You can clearly and easily notice that the top piece does not extend out as far as the others. Those are definitely 3 different sized front lips



Having said that.... They look like they were designed (at least the ones pictured) so that the top one would only cover the middle of the bumper, while the larger bottom one goes all the way out to the side air scoops of the bumper!

You are right! On the picture with the three lips in line, there is the last one (nearest my 1M) one of the first lips we made. There is a "nose" at every end - but this we don't sell, because fitted under the Car, it looks not so nice as I wanted that. The two lips in Front have the same size and this is the size we sell only !
If the lip can be fitted with the Alpha-N-Flaps, I can't say, but I will check that with Alex from Alpha-N and will tell it here ! Also I toke a photo of the lip today and will post it here, there you can see the "long-holes" to fit at the bumper - I think than everybody knows what I mean.

[Dackelone]

And a few more pics...

[Hobbe]

Was it 300 Euros?

I'm up for it (1 pc Matte Black)
I assume you ship to Sweden?

[Aussie_in_London]

So I wasn't imagining there being a difference in size, even shape of the first and last just going by the sides....

Anyway's I am liking what Lightweight has to offer, it is exactly what I have been waiting for, practical and simplistic, just like the motogp safety car that had my interest from the start....

[MrRoboto]

Put my name on the list for the GB.

[h-manuk]

Originally Posted by Aussie_in_London

So I wasn't imagining there being a difference in size, even shape of the first and last just going by the sides....

Anyway's I am liking what Lightweight has to offer, it is exactly what I have been waiting for, practical and simplistic, just like the motogp safety car that had my interest from the start....

I think their splitters will suit your car perfectly!

[bdaddylo]

Originally Posted by Fuchsröhre

And for the fitment of the lip: We don't bond the lip at the bumper, it's screwed 10 times, so it can't get off. And PE is nearly unbreakable, we tested the lip on the German Highway with nearly 300Km/h - nothing happend -

Do you have any pictures to show how to install the lip? You mention 10 screws, but I only see 4 slots.

[Fuchsröhre]

Originally Posted by bdaddylo

Do you have any pictures to show how to install the lip? You mention 10 screws, but I only see 4 slots.

We have a detailed, pictured installation guide for the Installation - I only have to translate everything from German in english spoken The Installation guide is in the transport box of the lip, also the screws and everything you need ! 4 Slots with 2 screws in one slot = 8 Screws. And two screws at the end of the lip, fitted in original fittings from the bumper = alltogether 10 screws

[MrRoboto]

Originally Posted by Fuchsröhre

We have a detailed, pictured installation guide for the Installation - I only have to translate everything from German in english spoken The Installation guide is in the transport box of the lip, also the screws and everything you need ! 4 Slots with 2 screws in one slot = 8 Screws. And two screws at the end of the lip, fitted in original fittings from the bumper = alltogether 10 screws

This sounds very sturdy. Using some of the factory mount holes will also help with aligning it properly.

Any eta on closing of the GB, delivery, etc?

[///M1]

Originally Posted by ozinaldo

Interesting idea. Even if the smallest one fits together with the "fangs" I am not sure if they will look better or worse, need to see this done or rendered to decide.

Likewise, need to see it. I think they'll look OK with the Alpha-N fangs if they are in recessed a bit (one of several settings it seems) and in gloss black finish (assuming the fangs are in lacquered CF), that way it'll also match the IND/BMW Performance black gloss kidney grills.

[carlosii]

I'm in for the lip...

[CDR_UK]

Count me in, shipped to France please.

[mcx_]

I would like to order one in a group buy also please

[firechicken99]

With all of the different versions were are seeing is it possible to get a confirmation on what version of the lip is to be sold here?!?!

Thanks!

[YoungGuns]

IM IN FOR GB FOR SURE. imo it's a good deal compared to some other options we have. love the adjustability of length that the lip protrudes out too.

[xerox00]

2 more pics on a VO

[///Morgan]

I'm really liking this lip.
Consider me in for the GB.
Is the Lighweight logo a removable sticker?

[Fuchsröhre]

Originally Posted by firechicken99

With all of the different versions were are seeing is it possible to get a confirmation on what version of the lip is to be sold here?!?!

Thanks!

Look at the pictures Xerox posted here. This is the final version you can buy. For ordering: Please send me a private message or better, fill out the contact formular on our Homepage (www.titanauspuffanlagen.de) and send that. Than I can answer everybody who wants a frontlip

Marc
Lightweight