|
|
|
07-10-2012, 10:10 AM | #1 |
Private
9
Rep 79
Posts |
Performance Shop in South Florida (Broward)
Any shop recommendations for installing ST Coils, DP and Mids in the Broward area? Would prefer somewhere that has done a few 135i or 335i before.
Thanks. |
07-10-2012, 05:28 PM | #2 |
Major
340
Rep 1,293
Posts |
If you are willing to drive 45 minutes north, check out Road-n-Race in WPB. The owner Peter swapped out my whole suspension including the coilovers, control arms, camber plates, subframe bushings, etc. The car was ready (with an alignment to my specs) in a day and a half. I believe it cost just under $900.
|
Appreciate
0
|
07-10-2012, 06:25 PM | #3 |
Networking Geek
24
Rep 334
Posts
Drives: 2014 Subaru STi 5dr
Join Date: Apr 2008
Location: Pembroke Pines, FL
|
900 is a lot of money for something you can do on your own. If you are confident, I recommend doing some research on the installs.
__________________
|
Appreciate
0
|
07-10-2012, 08:43 PM | #4 |
Major
340
Rep 1,293
Posts |
|
Appreciate
0
|
07-11-2012, 10:42 AM | #5 |
Private
9
Rep 79
Posts |
I don't really have the equipment/tools to change the coils myself so I gotta find a shop for the install. $900 is a bit too much on my budget but I see you did have some other stuff done which I intend to get later on. Hopefully it won't cost as much. I'll give them a call if I can't find any place closer.
Anyone else from Broward who has a recommendation? |
Appreciate
0
|
07-12-2012, 09:09 AM | #6 |
Second Lieutenant
19
Rep 246
Posts
Drives: 2011 BSM/Coral Red 135 Vert
Join Date: Mar 2011
Location: Miami
|
If your willing to drive a little bit south, check out paw motorsports in Miami. Ask for Luis, he works on mini's and BMW's...he has a crazy fast 135 and is always working on 1 or 2 in his shop. Tell him Nick sent you. Also, have him take you for a ride in his 135...just make sure you have an empty stomach.
__________________
|
Appreciate
0
|
07-14-2012, 03:22 PM | #8 |
Private
9
Rep 79
Posts |
|
Appreciate
0
|
07-20-2012, 10:06 AM | #9 |
Enlisted Member
8
Rep 34
Posts |
Check out Eurowerks on Powerline and Wiles, they are always full of 335's, They could even set you up with a corner balance if your doing the coils. I think they are a sponsor on here somewhere too.
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|