|
|
|
06-03-2015, 09:41 PM | #1 |
Enlisted Member
3
Rep 46
Posts |
Cp-e charge pipe w/TIAL BoV Installed
Good evening everyone!
I got my charge pipe delivered this afternoon and got right to work installing it. It was a pretty straight forward process (especially if you have aftermarket intakes ). The only issue i ran into was removing the intake temp sensor and one of the DV tubes not wanting to come off : After the install I took the car around the block and onto a main road to hear the BoV and I must say I'm very pleased with it! I had a BoV on my previous car and it was a bit obnoxious, but the TIAl BoV is just loud enough to be heard without overdoing it. The only thing I found odd was that the Cp-e pipe re-used the stock clip to connect with the throttle body. Im not overly tech-savvy but was expecting hose clamps and silicon tubbing. Overall I'm happy that the install went well and pleased with the product! feel free to ask any questions I could also post a video so that anyone on the fence can hear the Tial BoV if anyone is on the fence about this product DIY I used: http://www.e90post.com/forums/showthread.php?t=66252 thanks to HyperM3 for the awesome write-up
__________________
2009 135i DCI intakes, JB4, Active intercooler and axel back, BMS DP, N55 mid pipes,93 Back End Flash, Inline Fuel Pump, BMS short shifter and clutch stop (SOLD)
2013 135is Stock |
06-04-2015, 01:22 PM | #3 |
Joint Chiefs of Staff
24166
Rep 190,725
Posts |
Nice!!
Tial is the most popular BOV for this platform. I have the HKS on my car but everyone i know like the Tial better.
__________________
Check out our current sale by clicking on this link!
https://x-ph.com/sale/ Phone number 702-494-9435 |
Appreciate
0
|
Post Reply |
Bookmarks |
|
|