|
|
|
02-16-2011, 03:01 PM | #1 |
Colonel
166
Rep 2,926
Posts |
What kind of tape for iCarbon Mirror Overlays?
Looking to find out what specific type of tape goes behind the overlays to put on the mirrors? And what is the best method for applying the tape? I don't have any directions and want to know the best spots for adhesion.
Brand name would be good! UPDATE: For those interested... Following up on this project. I went with 1speedbike's preference and bought the 3M trim adhesive because I did not want the space problem with the CF Overlay fitments that people have been having with the 3rd party products. I used CF Overlays from iCarbon. Below I have a picture of the 3M Trim Adhesive that I used plus some pics of after and the fitments. I put the glue on the inside of the CF overlays not directly on the mirrors. After I fitted them properly I used duct tape and wrapped them tight around for around 4-5 hours to let the glue set. Enjoy! I took lots of pics for those people that like pictures! Last edited by Satalite; 03-13-2011 at 12:02 PM.. |
02-16-2011, 05:59 PM | #3 |
Captain
58
Rep 694
Posts
Drives: BMDUBS
Join Date: May 2009
Location: CA
|
the regular ones they use on the spoiler? the one we can get at home depot in a huge roll?
__________________
|Shadowline Grills|Hotchkis Front Sway Bar|DIY CF Black Fabric Trim|Carbon Fiber Trunk Spoiler|Black O.Z Ultraleggeras|BMW Performance Exhaust|M-Sport Bumpers w/ Fogs|Shadowline Diffuser|CSR Eyelids|BMW Performance Shifter/Boot and Handbrake|AFE stage 2 intake|Koni FSD + Eibach Pro-kit|///M mirrors|Blackline LCI| |
Appreciate
0
|
02-16-2011, 07:17 PM | #4 | |
Colonel
166
Rep 2,926
Posts |
Quote:
Last edited by Satalite; 02-16-2011 at 08:34 PM.. Reason: Context |
|
Appreciate
0
|
02-16-2011, 07:30 PM | #5 |
Captain
58
Rep 694
Posts
Drives: BMDUBS
Join Date: May 2009
Location: CA
|
hahaha , i was actually asking e90sexion if that was the one he was talking about. a bit defensive there.
__________________
|Shadowline Grills|Hotchkis Front Sway Bar|DIY CF Black Fabric Trim|Carbon Fiber Trunk Spoiler|Black O.Z Ultraleggeras|BMW Performance Exhaust|M-Sport Bumpers w/ Fogs|Shadowline Diffuser|CSR Eyelids|BMW Performance Shifter/Boot and Handbrake|AFE stage 2 intake|Koni FSD + Eibach Pro-kit|///M mirrors|Blackline LCI| |
Appreciate
0
|
02-16-2011, 08:48 PM | #7 |
Brigadier General
732
Rep 3,274
Posts |
http://www.amazon.com/3M-Super-Stron.../dp/B001B0QC3M
(however, I used 3m trim adhesive so that there would be no gap between the cap and the mirror itself. though this makes it a giant pain in the ass to get off again..)
__________________
2022 X4 M40i - 2008 135i - 2015 F700GS On Order - 2024 i4 M50 Scruffy's gonna die the way he lived... Mmhm. |
Appreciate
0
|
02-16-2011, 09:55 PM | #8 |
Captain
58
Rep 694
Posts
Drives: BMDUBS
Join Date: May 2009
Location: CA
|
its fine! im actually glad you made this thread because im going to get the mirrors covers really soon so i need to know what tape to get as well!
1speedbike, where did you get that tape? I don't want a gap either
__________________
|Shadowline Grills|Hotchkis Front Sway Bar|DIY CF Black Fabric Trim|Carbon Fiber Trunk Spoiler|Black O.Z Ultraleggeras|BMW Performance Exhaust|M-Sport Bumpers w/ Fogs|Shadowline Diffuser|CSR Eyelids|BMW Performance Shifter/Boot and Handbrake|AFE stage 2 intake|Koni FSD + Eibach Pro-kit|///M mirrors|Blackline LCI| |
Appreciate
0
|
02-16-2011, 10:06 PM | #9 |
Colonel
166
Rep 2,926
Posts |
I probably won't have to worry about getting it off anytime soon so the "trim adhesive" would be best. (don't want a gap)... could you provide a link to that?
|
Appreciate
0
|
02-17-2011, 01:05 PM | #10 |
Colonel
166
Rep 2,926
Posts |
Found this....
I am confused on which one to get... there are 3 products help me decide! http://products3.3m.com/catalog/us/e...er/output_html I think the one that I will need is the ST1200 but not 100% sure. Last edited by Satalite; 02-17-2011 at 01:15 PM.. |
Appreciate
0
|
02-17-2011, 02:02 PM | #11 |
Captain
58
Rep 694
Posts
Drives: BMDUBS
Join Date: May 2009
Location: CA
|
I think the st1200 would be the best for us since its pretty thin and its a sealer too! thanks!
__________________
|Shadowline Grills|Hotchkis Front Sway Bar|DIY CF Black Fabric Trim|Carbon Fiber Trunk Spoiler|Black O.Z Ultraleggeras|BMW Performance Exhaust|M-Sport Bumpers w/ Fogs|Shadowline Diffuser|CSR Eyelids|BMW Performance Shifter/Boot and Handbrake|AFE stage 2 intake|Koni FSD + Eibach Pro-kit|///M mirrors|Blackline LCI| |
Appreciate
0
|
02-17-2011, 02:04 PM | #12 |
Captain
58
Rep 694
Posts
Drives: BMDUBS
Join Date: May 2009
Location: CA
|
__________________
|Shadowline Grills|Hotchkis Front Sway Bar|DIY CF Black Fabric Trim|Carbon Fiber Trunk Spoiler|Black O.Z Ultraleggeras|BMW Performance Exhaust|M-Sport Bumpers w/ Fogs|Shadowline Diffuser|CSR Eyelids|BMW Performance Shifter/Boot and Handbrake|AFE stage 2 intake|Koni FSD + Eibach Pro-kit|///M mirrors|Blackline LCI| |
Appreciate
0
|
02-17-2011, 02:21 PM | #14 |
Captain
58
Rep 694
Posts
Drives: BMDUBS
Join Date: May 2009
Location: CA
|
ohh, I've purchased that tape before, but I'm concerned if that tape is too thick. Is that what you used?
__________________
|Shadowline Grills|Hotchkis Front Sway Bar|DIY CF Black Fabric Trim|Carbon Fiber Trunk Spoiler|Black O.Z Ultraleggeras|BMW Performance Exhaust|M-Sport Bumpers w/ Fogs|Shadowline Diffuser|CSR Eyelids|BMW Performance Shifter/Boot and Handbrake|AFE stage 2 intake|Koni FSD + Eibach Pro-kit|///M mirrors|Blackline LCI| |
Appreciate
0
|
02-17-2011, 07:20 PM | #15 |
Major General
761
Rep 7,408
Posts |
|
Appreciate
0
|
02-17-2011, 08:10 PM | #16 |
Captain
58
Rep 694
Posts
Drives: BMDUBS
Join Date: May 2009
Location: CA
|
the thickness of that tape can cause the mirrors to be less flush than it already is
__________________
|Shadowline Grills|Hotchkis Front Sway Bar|DIY CF Black Fabric Trim|Carbon Fiber Trunk Spoiler|Black O.Z Ultraleggeras|BMW Performance Exhaust|M-Sport Bumpers w/ Fogs|Shadowline Diffuser|CSR Eyelids|BMW Performance Shifter/Boot and Handbrake|AFE stage 2 intake|Koni FSD + Eibach Pro-kit|///M mirrors|Blackline LCI| |
Appreciate
0
|
02-18-2011, 12:09 PM | #18 |
Captain
58
Rep 694
Posts
Drives: BMDUBS
Join Date: May 2009
Location: CA
|
I couldn't wait anymore so i just got the 3m/scotch tape from home depot. ill post pics later
__________________
|Shadowline Grills|Hotchkis Front Sway Bar|DIY CF Black Fabric Trim|Carbon Fiber Trunk Spoiler|Black O.Z Ultraleggeras|BMW Performance Exhaust|M-Sport Bumpers w/ Fogs|Shadowline Diffuser|CSR Eyelids|BMW Performance Shifter/Boot and Handbrake|AFE stage 2 intake|Koni FSD + Eibach Pro-kit|///M mirrors|Blackline LCI| |
Appreciate
0
|
02-18-2011, 12:25 PM | #19 |
Colonel
166
Rep 2,926
Posts |
|
Appreciate
0
|
02-18-2011, 12:55 PM | #20 |
Captain
58
Rep 694
Posts
Drives: BMDUBS
Join Date: May 2009
Location: CA
|
haha yepp i actually just picked them up from blacknredi yesterday! im in the processing of lining the adhesive
__________________
|Shadowline Grills|Hotchkis Front Sway Bar|DIY CF Black Fabric Trim|Carbon Fiber Trunk Spoiler|Black O.Z Ultraleggeras|BMW Performance Exhaust|M-Sport Bumpers w/ Fogs|Shadowline Diffuser|CSR Eyelids|BMW Performance Shifter/Boot and Handbrake|AFE stage 2 intake|Koni FSD + Eibach Pro-kit|///M mirrors|Blackline LCI| |
Appreciate
0
|
02-18-2011, 05:09 PM | #22 |
Captain
58
Rep 694
Posts
Drives: BMDUBS
Join Date: May 2009
Location: CA
|
arghhhhhhhhhhhhhhhhhhhhhhhhhhhh.... turns out the tape is pretty thick, even though i stretched it a bit while applying it to the caps. The off fitment also has to do with the mirror caps themselves, which i've emailed icarbon about but have yet to get a response.
on to some pictures here's the tape i used that i believe e90sexion was talking about I cut the tape into fourths and lined them on the caps And finally just test fitting them gave me this result If you test fit the caps without any tape and it sits perfectly flush, applying this tape with the method i mentioned earlier should give you a good result. The tape was only 5 bucks and it told like 15 mins to apply it, so its worth a shot. derekL
__________________
|Shadowline Grills|Hotchkis Front Sway Bar|DIY CF Black Fabric Trim|Carbon Fiber Trunk Spoiler|Black O.Z Ultraleggeras|BMW Performance Exhaust|M-Sport Bumpers w/ Fogs|Shadowline Diffuser|CSR Eyelids|BMW Performance Shifter/Boot and Handbrake|AFE stage 2 intake|Koni FSD + Eibach Pro-kit|///M mirrors|Blackline LCI| |
Appreciate
0
|
Post Reply |
Bookmarks |
|
|