For Sale in Oz

[avecta]

PWM meth kit (with charge pipe and 10L of elf meth)

Advan custom meth tank

Asking 1200 (has to go!)

[Benfica]

Originally Posted by Harlequin

You need to fix your "Drives:".... It's not an N45... Every time I see it it bugs me...

all done chief

[Harlequin]

Originally Posted by SNEL

all done chief

[Alpinestar1M]

For sale is a set of 'As New' Akrapovic Catless Downpipes.

These were installed on my 1M for approximately 4500kms and were uninstalled when the vehicle was sold. They are in mint condition apart from the standard heat discolouration that occurs to all exhaust components.

It's goes without saying that these are exceptional quality pieces. Some of the noteworthy characteristics about these downpipes is, unlike the other 'rigid' style aftermarket downpipes on the market, these feature a flex joint to alleviate the stress that is placed on the gaskets and turbine side of the turbo while the motor is shifting under load. This prevents damage occurring to turbine outlet and or leaking of exhaust gasses from the gaskets.

They feature the standard bungs for the factory O2 sensors and having installed these after running a set of AR downpipes I was told by the installer that these fit substantially better.

Below is a link with further information:
http://alekshop.com/products/akrapov...pes_for_bmw_1m

I have also attached some images of the downpipes.

Asking $750

PM me or quote me with any questions you have.

[Alpinestar1M]

Another photo. I have others but I can only add one at a time for some reason. If you would like another photo please let me know.

Originally Posted by Alpinestar1M

For sale is a set of 'As New' Akrapovic Catless Downpipes.

These were installed on my 1M for approximately 4500kms and wee uninstalled when the vehicle was sold. They are in mint condition apart from the standard heat discolouration that occurs to all exhaust components.

It's goes without saying that these are exceptional quality pieces. Some of the noteworthy characteristics about these downpipes is, unlike the other 'rigid' style aftermarket downpipes on the market, these feature a flex joint to alleviate the stress that is placed on the gaskets while the motor is shifting under load. This prevents damage occurring to turbine outlet and or leaking of exhaust gasses from the gaskets.

They feature the standard bungs for the factory O2 sensors and having installed these after running a set of AR downpipes I was told by the installer that these fit substantially better.

Below is a link with further information:
http://alekshop.com/products/akrapov...pes_for_bmw_1m

I have also attached some images of the downpipes.

Asking $750

PM me or quote me with any questions you have.

[drjekl]

Originally Posted by Zuzu

$5K...lol..Thats very optimistic mate..lol







Besides it probably having a bent chasis, dont forget the availability of parts, and the time it will be off the road awaiting parts from Germany IF AVAILABLE, which pushes up the price of repairs for the insurance company.

Not many 1M's in Oz in the wrecking yard for spare parts either.

As I said *used parts* I purchased a full F&R m3 suspenion from a low milage 2010 M3 for Under $5k with the diff, brakes, F&R subframe etc etc

That's not to say that it would only cost $5k to repair, but as mentioned the suspension parts alone could be purchased for that..

[Benfica]

Originally Posted by Alpinestar1M

For sale is a set of 'As New' Akrapovic Catless Downpipes.

These were installed on my 1M for approximately 4500kms and were uninstalled when the vehicle was sold. They are in mint condition apart from the standard heat discolouration that occurs to all exhaust components.

It's goes without saying that these are exceptional quality pieces. Some of the noteworthy characteristics about these downpipes is, unlike the other 'rigid' style aftermarket downpipes on the market, these feature a flex joint to alleviate the stress that is placed on the gaskets and turbine side of the turbo while the motor is shifting under load. This prevents damage occurring to turbine outlet and or leaking of exhaust gasses from the gaskets.

They feature the standard bungs for the factory O2 sensors and having installed these after running a set of AR downpipes I was told by the installer that these fit substantially better.

Below is a link with further information:
http://alekshop.com/products/akrapov...pes_for_bmw_1m

I have also attached some images of the downpipes.

Asking $750

PM me or quote me with any questions you have.

Hi bud,
I'm v interested !
I'm in Perth... What's your mobile and I'll give you a buzz.

Regards

Sergio Balsa
0416973443

[Alpinestar1M]

Originally Posted by SNEL

Hi bud,
I'm v interested !
I'm in Perth... What's your mobile and I'll give you a buzz.

Regards

Sergio Balsa
0416973443

Hi Sergio,

Thanks for your enquiry, unfortunately they've already sold pending payment.

Seems as though they were too cheap haha.

If it falls through I'll let you know.

Thanks

[Dreama]

Wtb after market axle back,
Located in Sydney

[froop]

Someone left this note on my windshield scrawled on the back of a party supermarket receipt lol.

[flinchy]

Originally Posted by froop

Someone left this note on my windshield scrawled on the back of a party supermarket receipt lol.

Hey froop, any chance you still have the ac lines?


Also, am after power steering lines+cooler thing from a 135i if anyone by some chance has a spare set >_<

[froop]

Originally Posted by flinchy

Hey froop, any chance you still have the ac lines?


Also, am after power steering lines+cooler thing from a 135i if anyone by some chance has a spare set >_&lt;

I still have the AC lines but not power steering stuff. I do have a condenser and evaporator for the AC system.

[ozimmer]

FS: BMW OEM springs and dampers (non M-sport) from 2010 E82 125i. Usage approximately 15,000km.

Front struts (left & right), front springs, rear springs and rear dampers. BMW part numbers:
Front struts: 3131 6786021 (left), 3131 6786022 (right)
Rear Dampers: 3352 7682859 (x 2)
Front springs are labelled C4, rears are C1

May also suit other models - buyer to make their own enquiries.

Offers around $350. I prefer buyer to collect (Sydney), otherwise postage at cost to buyer within Australia only.

[arthurtwp]

Hey I'm in Perth

Have: 1 set OEM 18" 208 M with gutter rash all over - $350
(OEM 18" rim for e87)

Also, anyone knows where to source a well priced e87 130i ssk? found the part number for the shifter, but am not too sure if I need to replace other parts as well.

PM me or drop me a text at 0422379807

[RonBurgundy]

WANTED:

E82 LUX V3 or V4 angel eyes
E82 Blackline LCI rear lights

Sydney Area
PM me

[Gumball]

Originally Posted by Gumball

For Sale:
2009 Manual Jet Black 135i
Comfort Access
Hifi Logic 7
Sunroof
33,700km

Lots of Mods:
JB4 with 2Step and No Lift Shift
JB4 Meth with Howerton 2 gallon Tank and devils own pump and solenoid. Stainless lines and 4an connectors. Leak proof meth setup.
ETS 5 Intercooler
ER Charge Pipe with Forge DV's
BMS Oil Catch Can
AR Catless Downpipes
N55 mids with custom resonators (no rasp)
KW V1 Coilover
M3 Front control Arm Kit
M3 Rear Guide Rod kit
M3 E93 front anti roll bar
M3 Rear upper link kit
M3 Rear Sub Frame Bushes.
Quaife LSD
Kerscher front lip
Carbon Diffuser Scopione
Black line LCI rear lights
Lux Angel Eyes
Apex EC7 wheels

Serviced at BMW then Advan. Oil changed every 5,000 kms.

Dyno @ 302rwkw (Advan Dyno)

No accidents, scratches but some stone chips.

Reason for sale: Have had a bad left knee for the last 4 years but has become worse lately and need surgery early next year and doctor says no manual for at a minimum of 9 months....

Price $49,500 firm and if no interest will part it out mid January.
If interested PM me for pics etc.

Bump

[zjiejun]

WTB e92 pre-lci rear right tail lamp (outer)

my led bars are failing.

pm price incl shipping to WA thanks

[Ned_Kelly]

hi guys, chasing a hpfp, any condition, just want to do some investigative disassembley

[PeteA]

For Sale:
1) Kerscher Front Carbon Fiber Splitter - Purchased New from BMR. Decided against it as the carparks I'm entering for work are steep and narrow so would rather this not be destroyed. Test fitted it, then removed. $400 PENDING PAYMENT!

2) Looking at parting with my Volks. Send me an offer if you're interested. These are fully forged 19" wheels with no curb rash or any stone dings. They fit a stock setup as well as my recently modified setup without any rubbing. 95%+ rubber still.
19x8 ET 48 Fronts @ 225/35/19 Goodyear Eagle F1 Asymmetric 2
19x9 ET 50 Rears @ 255/30/19 Goodyear Eagle F1 Asymmetric 2
http://www.1addicts.com/forums/showp...2&postcount=26

[flinchy]

Originally Posted by froop

I still have the AC lines but not power steering stuff. I do have a condenser and evaporator for the AC system.

Awesome, i'll check which ones i need specifically tomorrow arvo

[Knightelf]

Originally Posted by PeteA

2) Looking at parting with my Volks. Send me an offer if you're interested. These are fully forged 19" wheels with no curb rash or any stone dings. They fit a stock setup as well as my recently modified setup without any rubbing. 95%+ rubber still.
19x8 ET 48 Fronts @ 225/35/19 Goodyear Eagle F1 Asymmetric 2
19x9 ET 50 Rears @ 255/30/19 Goodyear Eagle F1 Asymmetric 2
http://www.1addicts.com/forums/showp...2&postcount=26

Link not working Pete

[PeteA]

Fixed Thanks for heads up!