|
|
|
04-07-2013, 01:20 PM | #1 |
Lieutenant
61
Rep 574
Posts |
Back of 135i
When I wash my car I find the back to be a little more difficult to clean. I have to really put a lot of pressure on the glove in order to try and remove dirt. Is there a cleaning agent that would break down the dirt a little better?
|
04-07-2013, 06:28 PM | #3 |
Colonel
171
Rep 2,347
Posts |
Chemical guys make amazing products check them out there all I use
__________________
Mods:-Berkexhaust -alpinaB3flash -CobbAP -Cobb FMIC -ER charge pipe tialQ bov -M3 front sway bar -M3 subframe bushings -M3 front upper and lower control arms -M3 guide rods -M3 rear upper control arms -Mfactory LSD -defiv lockdown kit -TC Kline SA coilovers /camber plates- HP rear toe arms |
Appreciate
0
|
04-08-2013, 12:28 PM | #5 |
Major
130
Rep 1,101
Posts |
Make sure you keep a good coat of sealant on your paint and that dirt should come off easier. I would avoid any of the stronger cleaners as I think they will just strip off wax/sealant. I use some of the stronger cleaner on my paint only when I am washing the car getting ready to do a polish and sealant application. Try a good sealant like Menzerna power lock or Blackfire and I think you will find the dirt comes off easy. The paint will be smooth and slippery!
|
Appreciate
0
|
Post Reply |
Bookmarks |
Thread Tools | Search this Thread |
|
|