Pic Request! Momo FXL-1

jfj1336 · 06-07-2009, 01:53 PM

http://www.momousa.com/images/conten...-one_black.jpg

Does anybody have these on? Or know a site where I can see them on a Jet Black 135?

Thanks!

rcracer_tx · 06-07-2009, 04:38 PM

Never seen those on a 1er... Do they make them in 1 series offsets?

ptack · 06-07-2009, 08:29 PM

If you can wade through their over-done web site you can find a pdf spec sheet on these (in German) which suggests that they do make an 8 x 18 version of this wheel with a 120x5 bolt pattern and even the proper hub size for a BMW. The only offset, however, is 35, which suggests this is a good wheel for a 3 series, not a 1.

rcracer_tx · 06-07-2009, 11:30 PM

^ yeah, a 35 offset an an 8 inch wheel will stick out like a 4x4....

yourfriend · 06-08-2009, 02:17 AM

it looks like a wheel i would have put on my navigator... dunno how i feel about it.

BMWeber · 06-08-2009, 08:46 AM

35 offset with an 8" wheel will work. I run 8.5 wheel with a 38 offset and 245 PS2s. so that wheel with a 225/235 should be ok.

jfj1336 · 06-08-2009, 05:06 PM

Is there a website that I can go to to see these mounted? Sorry kind of new to modding

rcracer_tx · 06-08-2009, 05:32 PM

Quote:

Originally Posted by jfj1336

Is there a website that I can go to to see these mounted? Sorry kind of new to modding

Not that I know of, it would't matter because they will not physically fit inside the fender... That wheels offset will make the tire hit the fender everytime you hit a bump.

ptack · 06-08-2009, 06:38 PM

The friendly wheel-tire comparer says you'd be sticking out .7" further both front and rear with that offset, which is a lot. If you're new to modding I wouldn't even go there.

scorcherjf · 06-08-2009, 07:00 PM

Would definitely stick out too much in the rears. I'm running a 18x9 +40 in the rear with 255/35/18 and I had to roll my fenders out pretty far and they still rub slightly.

BMWeber · 06-08-2009, 09:41 PM

Quote:

Originally Posted by rcracer_tx

Not that I know of, it would't matter because they will not physically fit inside the fender... That wheels offset will make the tire hit the fender everytime you hit a bump.

I refer you to post #6

rcracer_tx · 06-08-2009, 10:52 PM

Quote:

Originally Posted by BMWeber

I refer you to post #6

Do you have side shots of that? Stock suspension?

This setup didn't rub either at stock ride height, does it fit properly then? I guess everyone has different taste, but I think wheels that stick out of the fender looks like crap, and were too poor to afford a set of wheels that fit correctly.

BMWeber · 06-09-2009, 07:24 AM

I'm also a track day instructor and have had no issues with rubbing. if I went to a slightly squarer tire there might be some rubbing but with PS2s there is no issue with 245s

rcracer_tx · 06-09-2009, 01:12 PM

Looks too far out of the front fender for my tastes, but I stand corrected on the rubbing... I tried to make a set of 18x8 enkei's work with a 35 offset and even with 225 tires they still rubbed on my car. You have any fender mods/rolling?

BMWeber · 06-09-2009, 01:32 PM

Quote:

Originally Posted by rcracer_tx

Looks too far out of the front fender for my tastes, but I stand corrected on the rubbing... I tried to make a set of 18x8 enkei's work with a 35 offset and even with 225 tires they still rubbed on my car. You have any fender mods/rolling?

Really with 225s makes you wonder if brand As 35ET is the same as brand Bs. only modification is I took the alignment pins out but no fender rolling.

rcracer_tx · 06-09-2009, 01:54 PM

Quote:

Originally Posted by BMWeber

Really with 225s makes you wonder if brand As 35ET is the same as brand Bs. only modification is I took the alignment pins out but no fender rolling.

I had stock stock camber, so that was probably a big factor...

06-07-2009, 01:53 PM	#1
jfj1336 Private 7 Rep 60 Posts Drives: BMW 135i Join Date: Jun 2009 Location: Seattle iTrader: (0)	Pic Request! Momo FXL-1 http://www.momousa.com/images/conten...-one_black.jpg Does anybody have these on? Or know a site where I can see them on a Jet Black 135? Thanks!
	Appreciate 0 Tweet Quote

06-07-2009, 04:38 PM	#2
rcracer_tx Banned 55 Rep 2,013 Posts Drives: BSM 135i Join Date: Apr 2008 Location: Texas iTrader: (0)	Never seen those on a 1er... Do they make them in 1 series offsets?
	Appreciate 0 Quote

06-07-2009, 08:29 PM	#3
ptack Brigadier General 269 Rep 4,470 Posts Drives: 135i Join Date: May 2008 Location: NJ iTrader: (0) Garage List 2008 135i [6.50]	If you can wade through their over-done web site you can find a pdf spec sheet on these (in German) which suggests that they do make an 8 x 18 version of this wheel with a 120x5 bolt pattern and even the proper hub size for a BMW. The only offset, however, is 35, which suggests this is a good wheel for a 3 series, not a 1. __________________ 135i, SGM, Coral, Sport Package, Auto, Premium Hifi, USB/ipod, Apex EC-7s, PPK Stage II
	Appreciate 0 Quote

06-07-2009, 11:30 PM	#4
rcracer_tx Banned 55 Rep 2,013 Posts Drives: BSM 135i Join Date: Apr 2008 Location: Texas iTrader: (0)	^ yeah, a 35 offset an an 8 inch wheel will stick out like a 4x4....
	Appreciate 0 Quote

06-08-2009, 02:17 AM	#5
yourfriend Second Lieutenant 5 Rep 224 Posts Drives: E82 128i Join Date: Jun 2008 Location: Beverly Hills iTrader: (0)	it looks like a wheel i would have put on my navigator... dunno how i feel about it.
	Appreciate 0 Quote

06-08-2009, 08:46 AM	#6
BMWeber Major 36 Rep 1,329 Posts Drives: 08 135i Join Date: Sep 2007 Location: Amesbury, MA iTrader: (5)	35 offset with an 8" wheel will work. I run 8.5 wheel with a 38 offset and 245 PS2s. so that wheel with a 225/235 should be ok.
	Appreciate 0 Quote

06-08-2009, 05:06 PM	#7
jfj1336 Private 7 Rep 60 Posts Drives: BMW 135i Join Date: Jun 2009 Location: Seattle iTrader: (0)	Is there a website that I can go to to see these mounted? Sorry kind of new to modding
	Appreciate 0 Quote

06-08-2009, 06:38 PM	#9
ptack Brigadier General 269 Rep 4,470 Posts Drives: 135i Join Date: May 2008 Location: NJ iTrader: (0) Garage List 2008 135i [6.50]	The friendly wheel-tire comparer says you'd be sticking out .7" further both front and rear with that offset, which is a lot. If you're new to modding I wouldn't even go there. __________________ 135i, SGM, Coral, Sport Package, Auto, Premium Hifi, USB/ipod, Apex EC-7s, PPK Stage II
	Appreciate 0 Quote

06-08-2009, 07:00 PM	#10
scorcherjf Captain 29 Rep 769 Posts Drives: 2008 135i Join Date: Nov 2008 Location: NJ iTrader: (2) Garage List 2008 135i [0.00]	Would definitely stick out too much in the rears. I'm running a 18x9 +40 in the rear with 255/35/18 and I had to roll my fenders out pretty far and they still rub slightly. __________________
	Appreciate 0 Quote

06-09-2009, 07:24 AM	#13
BMWeber Major 36 Rep 1,329 Posts Drives: 08 135i Join Date: Sep 2007 Location: Amesbury, MA iTrader: (5)	I'm also a track day instructor and have had no issues with rubbing. if I went to a slightly squarer tire there might be some rubbing but with PS2s there is no issue with 245s Attached Images
	Appreciate 0 Quote

06-09-2009, 01:12 PM	#14
rcracer_tx Banned 55 Rep 2,013 Posts Drives: BSM 135i Join Date: Apr 2008 Location: Texas iTrader: (0)	Looks too far out of the front fender for my tastes, but I stand corrected on the rubbing... I tried to make a set of 18x8 enkei's work with a 35 offset and even with 225 tires they still rubbed on my car. You have any fender mods/rolling?
	Appreciate 0 Quote