|
|
|
07-05-2023, 02:07 PM | #1 |
New Member
3
Rep 24
Posts |
E88 how do I leave the top open half way?
I have a new to me e88 and am trying to figure out how to get the top to stay open half way so I can repair the glass.
I put it into ignition mode and open the top so that the glass is horizontal and let go. However if I turn the ignition off, after a few seconds the top will go down. I'm not sure if the hydraulics just lose power and gravity happens (so I can put something there to keep the fre open) or does the top actively retract to prevent damage (in which case I shouldn't prop it up). Any tips on how to keep the top partially ipen with the car off? Thanks |
07-06-2023, 09:34 AM | #2 |
Private First Class
83
Rep 114
Posts |
The system only stays pressurized for a little bit after you stop the actuation mid-sequence. It is not retracting under power. Find a box that will work to keep it propped up. Use cloth to protect any surfaces. This is what I did and I had no issues.
|
Appreciate
1
jwolf63.00 |
Post Reply |
Bookmarks |
|
|