07-28-2017, 08:17 AM | #1 |
Second Lieutenant
93
Rep 253
Posts |
Fitting a 10x19 up front with KW V3
Hi guys,
as the title already mentions, i´m planning on purchasing a set of BBS LM 10x19+25, 11x19+25. Since i am running a KW V3, i´ve read that i may get into trouble with the strut clearance or spring clearance on the front. I already figured out that i´m going to use camber plates (Vorshlag or Ground Control) in order to place the wheel nicely under the fenders. I am just indecisive whether to go with a spacer up front to clear the KW V3 springs or to change the springs to shorter, linear ones that dont build that wide. Regarding my problem, could anyone tell me: - How much of a spacer would be needed to clear the KW V3 springs/strut with an 10j x 19 +25 wheel? - Which brand/type/size of linear springs you could recommend, in case that i would choose to change them. Really appreciate your effort Kind regards Mogge |
Post Reply |
Bookmarks |
|
|