|
|
|
07-03-2013, 11:42 PM | #1 |
Captain
68
Rep 627
Posts
Drives: '09 E88 135i M-Sport/6MT/SGM
Join Date: Feb 2011
Location: Vancouver
|
Needs some detailing insight.
Had the car for 2 years and finally got some time to do a full detail. Just wanted to clear up some questions.
Tools: Griot's Garage 6" random orbital Meguiars Ultimate Compound Meguiars Ultimate Polish Meguiars Ultimate liquid wax Uber Foam Pads; Yellow, Orange, Green, Blue, Black I just finished washing and claying as well as applied GG paint prep. Questions: 1) There are some slight swirls no scratches that I can see. Should I do compound then polish then wax or just the polish and wax is fine. I have no clue where these are from but they seem to be the worse. https://www.dropbox.com/s/xjzz4icl1uou0g3/CAM00416.jpg This is dried run off on my 303 fabric guard from my convertible top. https://www.dropbox.com/s/36evgl0dzt09nb7/CAM00417.jpg 2) If I was to do a compound should I use Uber orange or yellow with the orbital on speed 5? 3) With the polish, Uber green (60 PPI) or blue (70 PPI) with speed 2? Thanks for the assistance!
__________________
| Dinan S2=>MHD | e46 M3 trans mounts | Dinan CF CAI | ER CP | HKS SSQV4 BOV | RB PCV Valve | VRSF DP | N55 MP | BMW PE | OC | VRSF 7" FMIC | UUC Evo3 SSK | EBC GD Sport Rotors | EBC Redstuff | TRW F+R | | Whiteline KDT918 | H&R Front Sway | BMWP 313 | MPSS 225/255 | Scopione CF Rear Diffuser | iCarbon CF Rear Spoiler | P3 v2.1 Gauge | Interior LED Retrofit |
Last edited by litebulb; 07-04-2013 at 03:25 PM.. |
07-04-2013, 03:03 PM | #3 |
Captain
68
Rep 627
Posts
Drives: '09 E88 135i M-Sport/6MT/SGM
Join Date: Feb 2011
Location: Vancouver
|
__________________
| Dinan S2=>MHD | e46 M3 trans mounts | Dinan CF CAI | ER CP | HKS SSQV4 BOV | RB PCV Valve | VRSF DP | N55 MP | BMW PE | OC | VRSF 7" FMIC | UUC Evo3 SSK | EBC GD Sport Rotors | EBC Redstuff | TRW F+R | | Whiteline KDT918 | H&R Front Sway | BMWP 313 | MPSS 225/255 | Scopione CF Rear Diffuser | iCarbon CF Rear Spoiler | P3 v2.1 Gauge | Interior LED Retrofit |
|
Appreciate
0
|
07-04-2013, 09:02 PM | #4 |
Captain
68
Rep 627
Posts
Drives: '09 E88 135i M-Sport/6MT/SGM
Join Date: Feb 2011
Location: Vancouver
|
Seems I didn't need to compound or polish, except for those issue areas. I tested on one side of my trunk, first with compound, then with polish and noticed very little difference from the untouched side. Went straight to waxing which didn't do much for the looks but it's so silky smooth now.
__________________
| Dinan S2=>MHD | e46 M3 trans mounts | Dinan CF CAI | ER CP | HKS SSQV4 BOV | RB PCV Valve | VRSF DP | N55 MP | BMW PE | OC | VRSF 7" FMIC | UUC Evo3 SSK | EBC GD Sport Rotors | EBC Redstuff | TRW F+R | | Whiteline KDT918 | H&R Front Sway | BMWP 313 | MPSS 225/255 | Scopione CF Rear Diffuser | iCarbon CF Rear Spoiler | P3 v2.1 Gauge | Interior LED Retrofit |
|
Appreciate
0
|
07-05-2013, 11:41 PM | #6 |
Captain
68
Rep 627
Posts
Drives: '09 E88 135i M-Sport/6MT/SGM
Join Date: Feb 2011
Location: Vancouver
|
Finished
__________________
| Dinan S2=>MHD | e46 M3 trans mounts | Dinan CF CAI | ER CP | HKS SSQV4 BOV | RB PCV Valve | VRSF DP | N55 MP | BMW PE | OC | VRSF 7" FMIC | UUC Evo3 SSK | EBC GD Sport Rotors | EBC Redstuff | TRW F+R | | Whiteline KDT918 | H&R Front Sway | BMWP 313 | MPSS 225/255 | Scopione CF Rear Diffuser | iCarbon CF Rear Spoiler | P3 v2.1 Gauge | Interior LED Retrofit |
|
Appreciate
0
|
07-10-2013, 02:35 PM | #8 |
Captain
68
Rep 627
Posts
Drives: '09 E88 135i M-Sport/6MT/SGM
Join Date: Feb 2011
Location: Vancouver
|
__________________
| Dinan S2=>MHD | e46 M3 trans mounts | Dinan CF CAI | ER CP | HKS SSQV4 BOV | RB PCV Valve | VRSF DP | N55 MP | BMW PE | OC | VRSF 7" FMIC | UUC Evo3 SSK | EBC GD Sport Rotors | EBC Redstuff | TRW F+R | | Whiteline KDT918 | H&R Front Sway | BMWP 313 | MPSS 225/255 | Scopione CF Rear Diffuser | iCarbon CF Rear Spoiler | P3 v2.1 Gauge | Interior LED Retrofit |
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|