|
|
|
03-15-2010, 05:15 PM | #1 |
Private First Class
8
Rep 129
Posts |
Installed SouthernBM Camber Plates
Andrew and Jimmy at SouthernBM installed their locally designed and manufactured camber plates yesterday and the car feels great.
We've managed to get front 2.4 deg neg camber which is a good compromise between road and track. The ride feels exactly the same and there is no noise coming from the plates. It's early days yet and I'm keen to see what it will be like on the track but I can already feel, even around town, that the car feels dartier with better turn-in (have dialled in front toe-out of 1.5mm) Trutrack in North Melb did the alignment. The install at SouthernBM was painless and fast too with no dramas. Highly recommended
__________________
BMW 135I manual AW, red Coral, Procede processor, CDV, SprintBooster, H&R Front & Rear Sway Bars, Yokohama AO50's, SouthernBM camber plates, BMW Performance Rotors, Dinan Cold Air Intake, Dinan Exhaust, Dinan Oil Cooler, HPF Intercooler, Koni Front Sport Yellows, M3 rear subframe bushes
|
03-15-2010, 11:47 PM | #3 |
Private First Class
8
Rep 129
Posts |
Not that I can notice, and it rides the same as before
__________________
BMW 135I manual AW, red Coral, Procede processor, CDV, SprintBooster, H&R Front & Rear Sway Bars, Yokohama AO50's, SouthernBM camber plates, BMW Performance Rotors, Dinan Cold Air Intake, Dinan Exhaust, Dinan Oil Cooler, HPF Intercooler, Koni Front Sport Yellows, M3 rear subframe bushes
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|