|
|
|
06-16-2014, 09:56 AM | #1 |
Brigadier General
154
Rep 3,143
Posts |
Harness bar option for the 1er
I am in the market for the harness bar and the only thing I found was BRracing but they don't have in stock neither ETA. Anyone guide me to the right direction?
|
06-16-2014, 10:07 AM | #2 |
Lieutenant General
2285
Rep 12,565
Posts
Drives: Z4 M, X5, GX460
Join Date: Apr 2008
Location: CT
iTrader: (99)
Garage List F15 X5 xDrive35i [8.75]
E86 Z4 M [10.00] F10 550i (Retired) [9.17] F25 X3 xDrive35i (R ... [9.43] E82 135is (Retired) [9.50] E85 Z4 M (Retired) [9.41] E90 328i xDrive (Re ... [9.25] E86 Z4 3.0si (Retired) [9.24] |
You're going to be hard pressed to find a harness bar for the 1-series. BR Racing is pretty much it and the only other reputable company I know that produces harness bars is Brey Krauss but they only have something for 3-series (E36/46/9x). VAC does offer a nice half cage for the 1-series. The cage itself is welded together but I'm not sure if it's bolt-in or welded install to the chassis. I've seen this cage in person and it's beautifully crafted.
On a side note, assuming this is for track use (since you posted in the track section), just make sure whichever club/track you intend on driving with allows harness bars. |
Appreciate
0
|
06-16-2014, 10:29 AM | #4 |
Brigadier General
154
Rep 3,143
Posts |
|
Appreciate
0
|
06-16-2014, 10:33 AM | #5 | |
Brigadier General
154
Rep 3,143
Posts |
Quote:
|
|
Appreciate
0
|
06-16-2014, 10:41 AM | #6 | |
Lieutenant General
2285
Rep 12,565
Posts
Drives: Z4 M, X5, GX460
Join Date: Apr 2008
Location: CT
iTrader: (99)
Garage List F15 X5 xDrive35i [8.75]
E86 Z4 M [10.00] F10 550i (Retired) [9.17] F25 X3 xDrive35i (R ... [9.43] E82 135is (Retired) [9.50] E85 Z4 M (Retired) [9.41] E90 328i xDrive (Re ... [9.25] E86 Z4 3.0si (Retired) [9.24] |
Quote:
|
|
Appreciate
0
|
06-16-2014, 10:45 AM | #7 |
Banned
1518
Rep 4,744
Posts
Drives: S65 1M Clone & E92 M3 4.6L
Join Date: Apr 2011
Location: San Francisco
|
TC Designs out here in the bay area made mine. It is far superior to the BR racing bar in many ways. Shipping from here to you would be around $300 if you proceeded with one.
|
Appreciate
0
|
06-16-2014, 10:48 AM | #8 |
Brigadier General
154
Rep 3,143
Posts |
|
Appreciate
0
|
06-16-2014, 10:50 AM | #9 |
Banned
1518
Rep 4,744
Posts
Drives: S65 1M Clone & E92 M3 4.6L
Join Date: Apr 2011
Location: San Francisco
|
|
Appreciate
0
|
06-16-2014, 12:19 PM | #10 |
Enlisted Member
5
Rep 46
Posts |
|
Appreciate
0
|
06-16-2014, 01:10 PM | #11 |
Banned
1518
Rep 4,744
Posts
Drives: S65 1M Clone & E92 M3 4.6L
Join Date: Apr 2011
Location: San Francisco
|
|
Appreciate
0
|
06-17-2014, 04:10 PM | #14 |
Brigadier General
154
Rep 3,143
Posts |
|
Appreciate
0
|
06-17-2014, 08:37 PM | #15 |
First Lieutenant
130
Rep 351
Posts |
If I'm understanding you correctly, your decision is based on the coolness of the bar rather than the safety? The Schroth Quick Fit is DOT tested and features ASM (anti-submarine) technology that is proven safe. I'm not arguing the safety of a quality harness bar but if your decision is based on the look, then maybe you should invest in the higher dollar bar for your safety.
I see nothing wrong with running the Schroth Quick Fit harnesses if you main objective is to firmly secure you in your seat, SAFELY. I've run them in my last two cars and currently running them in my 1er. I know your post was a bit tongue-and-cheek but your safety on the track shouldn't be. I'm sure I'll get blasted for this but I would rather see a fellow enthusiast like yourself make the safe decision. Didn't mean to sound preachy... good luck in your decision.
__________________
Ohlins Road & Track Coilovers / Apex ARC 8's 245/255-35 MPSS / Wagner Downpipes / Wagner EVOII Intercooler / ER Charge Pipe / Forge DV / PowerFlex RSFB / PowerFlex Differential Bushings / MFactory 3.46 Torsion LSD / MHD Flasher
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|