Simple Coding in the GTA for 2010 and up interest gauging...

[M3Newbie88]

Hey Fellow GTA 1ers,

So I made a thread a few months ago helping 2008-2009 1ers code a few simple things. At the time I can only code the 08-09 versions because I would need another cable/adapter to do so for newer models. I wanted to gauge to see who will be interested for some coding for the newer years from 2010 and up since I've gotten multiple interests in the past. If there is enough interest I will get that ordered and help everyone. Please let me know. This is my old link: http://www.1addicts.com/forums/showt...light=question

Here are the codes I will do:

- Disable corner amber lights when headlight is on
- Remove Gong when Key Fob is in and door is open
- Raise the Window with the keyfob
- Digital speed Gauge (km/h and mph)
- One push pop out keyfob and turning the engine off
- True speed for gauges (apparently there si a +5mph buffer on bmws) this code removes that and shows you the true speed you are driving at)
- Disable Taillights on for DRLs
- Disable Amber lights from Welcome Lights
- Disable parking lights from Welcome Lights
- Folds side mirrors with FOB
- Remove gong for the seat belts
- Headlight Washers Disabled
- Wiper wipes to End position after turning engine off
- Auto Headlight Sensitivity adjustement from BC Button (For people with no idrive like me)
- Disable windows safety feature (Opening doors will not interrupt window roll up operation. Normally, if you open a door while the window is automatically rolling up, it will stop the operation. This feature disables it.
- Unlock doors once the start/stop button is pushed
- Enable Shift Suggestion in 6MT - When driving the next gear number appears on your dash to suggest shifting up.

All codes that I do are safe and tested on my own car.. others make people sign weavers but those are due to advance coding which I am not interested in at this time.

I can add/remove VO's however would need some time to make sure it works and the numbers are correct.

I put up a poll so you can vote, post or pm me with any questions at all.
I also put 2008-2009s on the poll options so people can vote also since I've only done this for 6-8 members on the forum.

[melissadb]

Do ittttttt

[ronster]

voted ;-)

[Raine]

Pleasee

[melissadb]

How much is the cable?

[M3Newbie88]

Originally Posted by melissadb

How much is the cable?

Around $150.00 so not expensive at all.. like I said if I get enough interest then it wouldn't be a problem as I don't own a 2010 and up vehicle so it wouldn't be any good for me... the difficulty is getting the program to work and doing the coding.

[mattryan]

do we have a verdict yet?

[M3Newbie88]

Originally Posted by mattryan

do we have a verdict yet?

Well Mattryan I would love to say I am going to go ahead with the new cable/adapter but looking at the voting results only 3 people are interested who own 2011 and up cars. I would have to charge what the E90 guys are to even break even.. If I had a new car I'd get it just to do mine and others but there is more interest from the 2009 and older 1ers.

[Kevin_russian]

I'm interested, how much $ tho to get it done?
And also is it possible to get the speed limit removed?

[geebee]

Yup, I'm interested as well.

What would the cost be?

[M3Newbie88]

Kevin_Russian.. I pmed you

geebee.. I can't pm you.. can you provide me with your email address?

Also I've decided to get the new cable so it should be here in a few weeks.. will update everyone once I get that and I can help the 2010 and up cars do coding.

For everyone else please pm which day and time and we will work something out thanks.

[mattryan]

Originally Posted by 1LazyBmw

Hey Fellow GTA 1ers,

So I made a thread a few months ago helping 2008-2009 1ers code a few simple things. At the time I can only code the 08-09 versions because I would need another cable/adapter to do so for newer models. I wanted to gauge to see who will be interested for some coding for the newer years from 2010 and up since I've gotten multiple interests in the past. If there is enough interest I will get that ordered and help everyone. Please let me know. This is my old link: http://www.1addicts.com/forums/showt...light=question

Here are the codes I will do:

- Disable corner amber lights when headlight is on
- Remove Gong when Key Fob is in and door is open
- Raise the Window with the keyfob
- Digital speed Gauge (km/h and mph)
- One push pop out keyfob and turning the engine off
- True speed for gauges (apparently there si a +5mph buffer on bmws) this code removes that and shows you the true speed you are driving at)
- Disable Taillights on for DRLs
- Disable Amber lights from Welcome Lights
- Disable parking lights from Welcome Lights
- Folds side mirrors with FOB
- Remove gong for the seat belts
- Headlight Washers Disabled
- Wiper wipes to End position after turning engine off
- Auto Headlight Sensitivity adjustement from BC Button (For people with no idrive like me)
- Disable windows safety feature (Opening doors will not interrupt window roll up operation. Normally, if you open a door while the window is automatically rolling up, it will stop the operation. This feature disables it.
- Unlock doors once the start/stop button is pushed

All codes that I do are safe and tested on my own car.. others make people sign weavers but those are due to advance coding which I am not interested in at this time.

I can add/remove VO's however would need some time to make sure it works and the numbers are correct.

I put up a poll so you can vote, post or pm me with any questions at all.
I also put 2008-2009s on the poll options so people can vote also since I've only done this for 6-8 members on the forum.

do you know how to adjust auto headlight sensitivity with idrive?

[M3Newbie88]

Originally Posted by mattryan

do you know how to adjust auto headlight sensitivity with idrive?

I don't have idrive on my car.. but I have the coding to do it if you want to try.

It will allow you to control the auto light and rain sensor in idrive.

I can also disable idrive disclaimer too.

[M3Newbie88]

Oh also here is one I find pretty interesting:

- Enable Shift Suggestion in 6MT

[mattryan]

Originally Posted by 1LazyBmw

I don't have idrive on my car.. but I have the coding to do it if you want to try.

It will allow you to control the auto light and rain sensor in idrive.

I can also disable idrive disclaimer too.

so you got the cable to the 12's?

[M3Newbie88]

Originally Posted by mattryan

so you got the cable to the 12's?

It is coming in the mail.. will advise when I get that

[mattryan]

Originally Posted by 1LazyBmw

It is coming in the mail.. will advise when I get that

awesome! do you mind just shooting me a quick e-mail once you receive it and are able to do the coding matthew.ryan@fido.blackberry.com

[ronster]

Originally Posted by 1LazyBmw

Oh also here is one I find pretty interesting:

- Enable Shift Suggestion in 6MT

Hmm... interesting.. wonder how would it display to tell you to shift? Do you have a picture of the display?

[driftdriven]

need someone to do this in Vancouver!!

[M3Newbie88]

Originally Posted by mattryan

awesome! do you mind just shooting me a quick e-mail once you receive it and are able to do the coding matthew.ryan@fido.blackberry.com

NP at all..

Originally Posted by ronster

Hmm... interesting.. wonder how would it display to tell you to shift? Do you have a picture of the display?

That I don't know.. come by and lets try and see I still have to fix your windows right hehe.. I'll put that code on your car for free as I am curious too..

Originally Posted by driftdriven

need someone to do this in Vancouver!!

Wish I could help.

[mattryan]

Originally Posted by 1LazyBmw

NP at all..



That I don't know.. come by and lets try and see I still have to fix your windows right hehe.. I'll put that code on your car for free as I am curious too..



Wish I could help.

btw do you have LED's for angel eyes? have you been able to increase the power to the angel eyes with the coding?

[M3Newbie88]

Originally Posted by mattryan

btw do you have LED's for angel eyes? have you been able to increase the power to the angel eyes with the coding?

I used to have a set of LEDs (i still have them) but i replaced them with Alpine AEs so no I have not been trying to code the voltage of the bulbs as its not 100% safe and could cause damage.

I tend to code the safest of the codes