|
|
|
11-01-2015, 11:48 PM | #1 |
Private First Class
15
Rep 166
Posts |
Sydney coding
Hey guys,
Coming from evos and coding / tuning some things myself I have a basic knowledge of how things work. After moving to a 09 135i, I'm keen to get a few minor things changed and coded to improve driveability.... When I bought the car 2nd hand I was told it has been given a minor tune from a local tuner to mainly improve fuel economy. I was wondering if anyone that is in Sydney with a cable and software would be keen to meet up and go through some options available and show me a basic run down. |
11-10-2015, 06:20 AM | #3 |
Major
758
Rep 1,336
Posts |
You have used the terms coding and tuning interchangeably in the post so not entirely clear what you are trying to achieve. Since you have a 09 there are a few tuning options out there like the cobb accessport with accesstuner that allows you to customise the dme tables yourself. If you are coming from the evos with the tactrix style tuning this would be similar. Keep in mind this will be vin locked and you need to know how to tune.
For coding there is the whole lot of info here http://www.bimmerfest.com/forums/sho...d.php?t=561237 however if you dont have the time and want a plug and play solution look at http://support.mycarly.com/knowledge...t-is-possible/ which works quite well. Hope this helps even though doesn't address the whole meet and run through scenario Last edited by MR RIZK; 11-10-2015 at 06:43 AM.. |
Appreciate
0
|
Post Reply |
Bookmarks |
|
|