Sponsored by The Tire Rack

[Olivier_TFE]

I have the same OZ en my 135i...

But the rear tire is 255 x 35.
I have the Bilstein PSS10.

=> I had to enlarge the rear of the car (+10 mm in every side).

(Sorry for my bad english)

[Si-M240i]

Originally Posted by Olivier_TFE

I have the same OZ en my 135i...

But the rear tire is 255 x 35.
I have the Bilstein PSS10.

=> I had to enlarge the rear of the car (+10 mm in every side).

(Sorry for my bad english)

Sorry I meant 35 too (corrected now)

What do you mean "enlarge" ?
Did it rub ?
Did you have the ET40 in the OZ's ?

I was told to fit ET40 with these tyres and it would fit, But form my research using the online calculators I recon ET45 is required.

Cheers,

Si

[Olivier_TFE]

Yes, I had lot of rub.

So, I extend the wings of the car at the rear by a profesional, and painted.
($1300)

I also put -2 degres camber rear and front.

Yes, I have the ET40 OZ, because is the only solution...

[Si-M240i]

Originally Posted by Olivier_TFE

Yes, I had lot of rub.

So, I extend the wings of the car at the rear by a profesional, and painted.
($1300)

I also put -2 degres camber rear and front.

Yes, I have the ET40 OZ, because is the only solution...

So much for the wheel supplier telling me they would definately fit. I had an idea they wouldn't. Just see that the 18 inch Yokohama Advan RZ that are designed for the 1 series Quoter ET45 front and ET50 rear on an 8J and 9J rim with 225 and 255 tyres.

Thanks for the help. I wil not buy the ET40's then as I do not want to get any bodyshop work done. I just want PNP

[Erik219]

I guess you better buy the VR-G2 then (same dimensions and offsets as the yokohama), like the guys from WSTO. I'm gonna save up for those wheels by next year. They're not mainstream, sporty and extremely lightweight... can't go better than that for our 1-er I think..

[Si-M240i]

Originally Posted by Erik219

I guess you better buy the VR-G2 then (same dimensions and offsets as the yokohama), like the guys from WSTO. I'm gonna save up for those wheels by next year. They're not mainstream, sporty and extremely lightweight... can't go better than that for our 1-er I think..

VR-G2 ?

[Trowa]

Wheels: Breyton GTS-R Black w/Red Stripe
Front: 18x7.5 +45
Spacer: none

Rear: 18x8.5 +48
Spacer: none

Tires:
Front Hankook Evo Ventus v12 215/40/18
Rear Hankook Evo Ventus v12 245/35/18

Suspension/Fender Mods/Camber:
- Stock 128i w/ sport package
- No Suspension/Fender Mods/Camber

Notes:
No rubbing all around.
Could use a bit of a drop as there is a bit of space between the tire/fender
VERY Happy with my purchase and decision to go for these rims.

Will post pics when I get home

[Nagata-San]

Originally Posted by mohammadz

had to do another tease

Give us moar !

[lionheart90k]

is 19x8.5+30 and 19x10+37 going to work with some fender mods and say H&R springs? or is it just going to look utterly weird?

[N55_BBM]

Originally Posted by Feyd

My winter setup.

17x8 ET40 ASA GT2 running 225/45/17 Blizzak WS60

Stock ride height, no rubbing.

hey i'm considering a similar setup, but can't seem to see the difference between the ASA GT1 and GT2, would you know?

also, i'm considering smaller tires like 205 or 215 but i'm afraid they'll look too skinny... how's the 225 setup working for you?

[Snertz]

Wheels: SSR Comp H
Front: 19x8 +45
Spacer: 10mm

Rear: 19x9.5 +35
Spacer: none

Tires:
Front Hankook Ventus V12 EVO 225/35/19
Rear Hankook Ventus V12 EVO 255/35/19

Suspension/Fender Mods/Camber:
-AST 4100's lowered ~1.5" front and rear (maybe more, tires are tucked, will measure shortly)
-Vorshlag front camber plates
-VMC Rear control arms and toe arms
-roll in the rear

Notes:
needed control arms to clear in the back, maxed out camber on stock links will rub badly - shreaded the sidewall of one tire

[j1gzca]

Test fitting my winter setup

Dunlop Winter Sport M3 Runflats (225/45R-17)
Sparco Pista (17x8 ET40)

[nemes1s7]

1st Setup

Breyton GTS-R
19x8.5 front +32
19x9.5 rear + 35
Tires Dunlop Sport Maxx
225x35x19 F
255x30x19 R
Bad fit lots of rubbing and sat outside of the wheel well.

2nd Setup

Breyton GTP
19x8.5 front +35
19x9.5 rear + 38
Tires Dunlop Sport Maxx
225x35x19 F
255x30x19 R
Sat outside of the wheel well

Current Setup

VMR 710
19x8.5 front +45
19x9.5 rear + 50
Tires Goodyear F1
225x35x19 F
255x30x19 R
great fit no rubbing sits inside the wheel well

[grodas]

I want this wheels (vmr 710 gunmetal) with this ET´s (Et 45) and 19".....where I can get?......please answer because I've been looking for a long time and the official website of VMR not in 19 and with these ET .....

[singh21]

Sik thread...

Rims
Front: 19" - 8.5 Js offset 38
Rear: 19" - 9.5 Js ofset 45

Tyres
Front: 225/35/19
Rear: 245/30/19

Note: Slight Stretch at rear...No rubbing even with car full of people and over bumps. no fenders rolled etc. Dish at rear is about 4.5"..

[adrean8j]

^^^What brand of wheels AND tyres?

[singh21]

they are Rare (from what i know!) Cades alloys

Rear have Pirelli tyres and front has Neuton Tyres.


Wot u think?

[grodas]

Originally Posted by nemes1s7

1st Setup

Breyton GTS-R
19x8.5 front +32
19x9.5 rear + 35
Tires Dunlop Sport Maxx
225x35x19 F
255x30x19 R
Bad fit lots of rubbing and sat outside of the wheel well.

2nd Setup

Breyton GTP
19x8.5 front +35
19x9.5 rear + 38
Tires Dunlop Sport Maxx
225x35x19 F
255x30x19 R
Sat outside of the wheel well

Current Setup

VMR 710
19x8.5 front +45
19x9.5 rear + 50
Tires Goodyear F1
225x35x19 F
255x30x19 R
great fit no rubbing sits inside the wheel well

I want this wheels (vmr 710 gunmetal) with this ET´s (Et 45) and 19".....where I can get?......please answer because I've been looking for a long time and the official website of VMR not in 19 and with these ET .....

[Rcode]

Can anyone tell me if these will fit on a 135? I searched and found nothing about these wheels. Thanks http://www.ocwheelwurx.com/wheels/wheels4.html

[Olivier_TFE]

Originally Posted by Rcode

Can anyone tell me if these will fit on a 135? I searched and found nothing about these wheels. Thanks http://www.ocwheelwurx.com/wheels/wheels4.html

I think "no", because the 135i want ET40 or more (49 / 52 stock).

[Mrbig]

wats the best pkg for no rubbing at all and better grip leased car may be an issue once returned u know, lol

[1trip5]

Wheels:
VMR 710
18x8.5 front +45
18x9.5 rear +50
Diamond Graphite Powdercoat Finish

Tires:
Hankook V12
225x40x18 front
255x35x18 rear

Suspension:
BMW Performance

Comments:
No rubbing.

Pics: