1M tyre pressures

[ChrisBuer]

I've been looking through the various handbooks I've managed to acquire, but I can't find anything about the correct tyre pressures to run on the 1M?

Does anyone know what PSI the fronts and rears should be set to?

[KIYO]

It's written on the car.
I thought I took a picture of the sticker but I can not find it right now.
For the normal load, the sticker says as follows in my car.
Front 2.3 kg/cm2 (230 kPa), rear 2.2 kg/cm2 (220 kPa).

[ChrisBuer]

Many thanks

[bvez3ro]

if you open the drivers door there should be a black sticker on the b-column.

[ChrisBuer]

Originally Posted by bvez3ro

if you open the drivers door there should be a black sticker on the b-column.

I would if I had my car but it doesn't come until October. The reason I ask is that I was just getting a checklist together of things I want to check on the car before having a long drive of it. Whenever I've had a new car, the dealer has always over-inflated the tyres, so I make a habit of checking them straight-away.

If the pressures are on the inside of the door, then at least I'll have them to hand

[KIYO]

I found it.