|
|
|
05-31-2013, 12:44 PM | #1 |
aka 1013MM
1246
Rep 9,545
Posts |
FOR SALE: SSR MS3 Professor Wheels WITH Falken Tires
It's time to let my wheels go because I'm thinking about selling my car completely (M3 ). These wheels have been on my car for a year and for 10,000 miles. They are 18" with Titan silver (the silver shifts from bright silver to a darker silver depending on lighting conditions) finish straight from SSR. The wait time for these wheels are around 3 months. There are no cracks. The tires are still good. They have not been drifted or off-road and no burnouts/donuts. The wheels themselves have been washed every two weeks with car soap and mirco fiber cloths and then waxed afterwards. If you want an aggressive look then this is the setup you'll want. I will be honest and say, yes, this setup will rub in the rear when you have 3 or more passengers in the car or if your angling into a rather steep driveway, the way to prevent the rubbing is to roll, or pull, or cut or camber, but it's not a must unless the rubbing bothers you. Otherwise, I drive this car daily by myself and do not have any rubbing. Also, there are a couple nicks on the rear passenger side wheel due to rock chips, but is barely visible (photo available upon request). An easy fix if it really bothers you. Wheels and Tires together: I will be willing to ship them or sell them local picked up. Price with shipping is $3450, local pick up price will be $3200. Wheels only: $2900 shipped, $2750 local pick up. Wheel and tire will be ready to transfer to new owner by the end of June or July. Whenever works best for you.
__________________
Last edited by 1013mm; 07-11-2013 at 11:46 AM.. |
05-31-2013, 12:58 PM | #2 |
Second Lieutenant
150
Rep 278
Posts |
What are the specs?
__________________
INSTAGRAM:@add1ct 2010 E90 335I : FBO | M Sport Conversion | FK Streetline | 19" Apex Arc-8 (SOLD)2013 335i M Sport : FBO/Meth | BC Racing coilovers | 20" BBS RSII (SOLD) 2011 135i : FBO | Airlift suspension | CCW LM5 |
Appreciate
0
|
06-01-2013, 01:10 AM | #8 |
aka 1013MM
1246
Rep 9,545
Posts |
not threatening. last time, it was a feeler too. this time its still a feeler, but a bit more serious. only trying to sell as is, not parting out.
__________________
|
Appreciate
0
|
06-01-2013, 01:11 AM | #9 |
aka 1013MM
1246
Rep 9,545
Posts |
__________________
|
Appreciate
0
|
06-01-2013, 07:59 AM | #11 |
aka 1013MM
1246
Rep 9,545
Posts |
__________________
|
Appreciate
0
|
06-05-2013, 11:53 AM | #13 |
aka 1013MM
1246
Rep 9,545
Posts |
Willing to split with the wheels and tires.
__________________
|
Appreciate
0
|
06-08-2013, 01:18 PM | #14 |
aka 1013MM
1246
Rep 9,545
Posts |
$2900 shipped for the wheels and $600 shipped for the tires.
__________________
Last edited by 1013mm; 06-10-2013 at 02:27 PM.. |
Appreciate
0
|
06-10-2013, 02:28 PM | #15 |
aka 1013MM
1246
Rep 9,545
Posts |
bump
__________________
|
Appreciate
0
|
06-12-2013, 06:16 PM | #16 |
aka 1013MM
1246
Rep 9,545
Posts |
bump.
__________________
|
Appreciate
0
|
06-13-2013, 12:38 PM | #18 |
First Lieutenant
18
Rep 333
Posts
Drives: x5m
Join Date: Jan 2012
Location: Cincinnati
|
great wheels man, glws
|
Appreciate
0
|
06-16-2013, 08:00 PM | #19 |
Private First Class
15
Rep 197
Posts |
Are you running stock camber in the rear? Plan on rolling the rears anyway, but didnt know how much neg camber you would need to run on a et37 to prevent rubbing
|
Appreciate
0
|
06-17-2013, 04:14 PM | #20 |
aka 1013MM
1246
Rep 9,545
Posts |
All stock camber. Probably .3 - .5 degree of negative camber to prevent rubbing if you must.
__________________
|
Appreciate
0
|
06-18-2013, 02:11 PM | #22 |
aka 1013MM
1246
Rep 9,545
Posts |
Around $4300 plus tires and shipping from Japan.
__________________
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|