Sponsored by The Tire Rack

[Eddie135]

Hi

I just got my New 135i here and was curious if I could fit 19" wheels to my 135i?

Will be great if any advice can be provided.

I was looking into getting 313s in 19".

Cheers.

[alexc93]

been done already....but they are HEAVY wheels

[competition]

Originally Posted by alexc93

been done already....but they are HEAVY wheels

Yep the OEM ones are heavy. The Miro 942 (313 replicas) are actually a better wheel than the OEM because they're much lighter compared to the 313 and they're strong too. Low pressure cast. 18's weighed 20lbs front and 22lbs rear! Not bad for a cast wheel!

[Eddie135]

Originally Posted by alexc93

been done already....but they are HEAVY wheels

I am running the stock Mtec wheels 264s, factory 18", they are quite heavy.
Surprise to hear the BMW Performance 313s are still heavy as BMW says they 313s are specials diecast wheels which is strong and ultra-light.

Another thing, do the 19" 313s fit to the 135? My mate has already fitting it to his 135i and it works well.

Went to BMW dealership, they refused to fit on my car, very stubborn.

Thanks.

[RaihaX]

Originally Posted by Eddie135

I am running the stock Mtec wheels 264s, factory 18", they are quite heavy.
Surprise to hear the BMW Performance 313s are still heavy as BMW says they 313s are specials diecast wheels which is strong and ultra-light.

Another thing, do the 19" 313s fit to the 135? My mate has already fitting it to his 135i and it works well.

Went to BMW dealership, they refused to fit on my car, very stubborn.

Thanks.

I assume that is because the 19" 313 is not a straight fit as it has 3er offset?

[competition]

Originally Posted by RaihaX

I assume that is because the 19" 313 is not a straight fit as it has 3er offset?

Most likely!

[evilstib]

Originally Posted by goeslikeschnell

Most likely!

And you frown upon the 18" 313 style that's meant for our car?

[strati1]

with roll you can run about a 40 upfront and a 45 rear with a round shoulder tire

[Eddie135]

Originally Posted by evilstib

And you frown upon the 18" 313 style that's meant for our car?

18" is too small, I prefer the 19" 313s looks on the 135, as it pokes out a little, looks awesome. I prefer 225s on the front and 255s on the rear.

I think as long as the car is not lower plus a bit of negative camber, should fit the 135 though.

Thanks.

[Eddie135]

Check out the link below:

313s 19" fitted on a 135 - 225/30R19 ET 37 Front & 255/30R19 ET39 Rear

http://www.1addicts.com/forums/showthread.php?p=4634954

‏

[Eddie135]

Originally Posted by Eddie135

Check out the link below:

313s 19" fitted on a 135 - 225/30R19 ET 37 Front & 255/30R19 ET39 Rear

http://www.1addicts.com/forums/showthread.php?p=4634954

‏

Sorry typo mistake should be: 225/35R19 ET 37 Front