|
|
|
03-11-2017, 08:06 PM | #1 |
Second Lieutenant
49
Rep 220
Posts |
JB4 N55 135is installed, getting limp mode (map 4)
Just installed JB4 and everything started up without any CEL. Starting at map 1, I noticed I couldn't do a WOT run due to limp mode switching to Map 4.
Tried Map 5 after re-starting car and same result. Three logs below. Startup and driving easy. Map 1 pull when limp mode happened. Map 5 pull when limp mode happened. I was getting CEL's (reduced power) during these runs. 1. Startup/drive around (warmup) http://www.datazap.me/u/inevitab1e/l...log=2&data=1-4 2. Map 1 pull and limp http://www.datazap.me/u/inevitab1e/l...log=0&data=1-4 3. Map 5 pull and limp http://www.datazap.me/u/inevitab1e/l...g=1&data=1-3-4 See anything I need to change in the settings? Fresh install. |
03-12-2017, 01:25 PM | #2 |
Second Lieutenant
49
Rep 220
Posts |
Log from today. Checked the connections, everything seems connected. I don't have the flex fuel adapter plugged in. Car isn't making boost.
http://www.datazap.me/u/inevitab1e/l...log=0&data=1-4 |
Appreciate
0
|
Post Reply |
Bookmarks |
|
|