|
|
|
11-02-2014, 02:34 PM | #1 |
The Only Sane One Here
61
Rep 1,135
Posts |
Four 17" Wheels FS - Northern VA
Selling set of 4 17" BMW wheels. (Can someone help me with they style number?) In good shape - clean with some road rash. Comes with 4 BMW tire covers for storage (excellent condition). Great for winter wheels for your 1-er. There are tires on the wheels, but they are old and worn - they should NOT be used. Wheels are available for inspection/pick-up in Arlington, VA, near Ballston Common Mall. Sorry - no shipping. Make me an offer. Thanks!
__________________
2011 135i VERT SGM/SB/MOONLIGHT - ED - with every single friggin' option they offered.
|
11-13-2014, 05:33 PM | #3 | |
The Only Sane One Here
61
Rep 1,135
Posts |
Quote:
These would be great for snow - but not for a show car!
__________________
2011 135i VERT SGM/SB/MOONLIGHT - ED - with every single friggin' option they offered.
|
|
Appreciate
0
|
11-24-2014, 01:11 PM | #4 |
Private
10
Rep 98
Posts |
With the lack of info, I cannot find any BMW wheels that match these... this is the closest I found http://www.bmwstylewheels.com/bmw/180
I am pretty sure those wheels are not BMW unless I am just blind.. Either way with no info it is hard to buy wheels with confidence.
__________________
“There are two ways of constructing a software design: One way is to make it so simple that there are obviously no deficiencies, and the other way is to make it so complicated that there are no obvious deficiencies. The first method is far more difficult.”
- Sir Charles Antony Richard Hoare |
Appreciate
0
|
11-24-2014, 02:53 PM | #5 |
Major
155
Rep 1,409
Posts |
They dont look like style 180's at all.
Pictures of the inside of the RIMS would be helpful. These usually reveal the offset IS or ET followed by two digits such as IS34 or ET34, and wheel width x diameter such as 8x17j or 7jx17. If these are not replicas, the engravings on the inside of the rim or spokes should also list a BMW part number.
__________________
2011 X3 35i with M pack + 2011 135i w/6SPMT | 255 square tire setup | Quaife 3.46 LSD | Diff lock down bracket | Bilstein B8+Swift SpecR springs+H&R FSB | CDV delete | BMS Oil Tstat bypass | ER FMIC & CP | N54Tuning DP | GC Street Camber Plates | M3 FCA +guide rods+RSFB's+Tranny mounts | Manzo toe arms | Cobb Stg2 agressive tune | Hawk DTC70 brake pads | RB SS brake pistons | Goodridge SS brake lines | Custom brake cooling ducts
Last edited by dcaron9999; 11-24-2014 at 02:59 PM.. |
Appreciate
0
|
11-24-2014, 04:18 PM | #6 | |
Private
10
Rep 98
Posts |
Closest solid 7 spoke design I could find to OEM. Then again, the "cannot find any BMW wheels" might have been a pretty solid clue to the fact that I didn't say they did.
Quote:
__________________
“There are two ways of constructing a software design: One way is to make it so simple that there are obviously no deficiencies, and the other way is to make it so complicated that there are no obvious deficiencies. The first method is far more difficult.”
- Sir Charles Antony Richard Hoare |
|
Appreciate
0
|
11-25-2014, 03:19 PM | #8 |
Major
155
Rep 1,409
Posts |
If these are sport edition A7 wheels, then they are 17"x7.5" and offsets will be one of these three:
17 x 7.5 5/120 20 mm. - - Silver JH375P1S 17 x 7.5 5/120 32 mm. - - Silver JH378P1S 17 x 7.5 5/120 40 mm. - - Silver JH372P1S
__________________
2011 X3 35i with M pack + 2011 135i w/6SPMT | 255 square tire setup | Quaife 3.46 LSD | Diff lock down bracket | Bilstein B8+Swift SpecR springs+H&R FSB | CDV delete | BMS Oil Tstat bypass | ER FMIC & CP | N54Tuning DP | GC Street Camber Plates | M3 FCA +guide rods+RSFB's+Tranny mounts | Manzo toe arms | Cobb Stg2 agressive tune | Hawk DTC70 brake pads | RB SS brake pistons | Goodridge SS brake lines | Custom brake cooling ducts
|
Appreciate
0
|
Post Reply |
Bookmarks |
Tags |
snow tires rims, wheels |
Thread Tools | Search this Thread |
|
|