|
|
|
|
|
| 08-04-2014, 10:30 AM | #1 |
|
Lieutenant
 
86
Rep 524
Posts |
Trunk VIN Sticker
I recently had my trunk blended and clear-coated to match some new panels damaged by an accident. When I removed the rear license plate to install a new holder I noticed what looked like thick masking tape over my VIN sticker that looks like it has been clear-coated over. If I remember correctly, it's supposed to be a metal VIN sticker, fully visible with nothing over it.
Can someone verify that the VIN sticker under the rear plate is supposed to be a bare sticker? A picture would be very helpful so I can prove that the body shop needs to fix this. If I just peel it off, I'm worried about taking some of the attached clear coat with it.
__________________
'13 128i | 6MT | SGM | Black Boston | Black Gloss | Lighting | Premium | Tech | HK | Anti-Theft | [CDV-Delete | Clutch Stop | 30% Pinnacle]
Ordered 2.23 | Production Begin 3.7 | Ends 3.15 | Released to carrier 3.18 | At port 3.19 | Departed 3.23 (K-line to Brunswick) | Arrived 4.7 | Truck 4.12 | Dealer 4.19 |
| 08-04-2014, 11:46 PM | #4 | |
|
Lieutenant
86
Rep 524
Posts |
Thanks! That's exactly what I thought it used to look like...
Quote:
__________________
'13 128i | 6MT | SGM | Black Boston | Black Gloss | Lighting | Premium | Tech | HK | Anti-Theft | [CDV-Delete | Clutch Stop | 30% Pinnacle]
Ordered 2.23 | Production Begin 3.7 | Ends 3.15 | Released to carrier 3.18 | At port 3.19 | Departed 3.23 (K-line to Brunswick) | Arrived 4.7 | Truck 4.12 | Dealer 4.19 |
|
|
Appreciate
0
|
Post Reply |
| Bookmarks |
|
|
