|
|
|
10-20-2014, 08:34 PM | #1 |
Colonel
188
Rep 2,224
Posts |
Anyone Got BAV Tech Cable?
Anyone have one of these cables locally? I want to use one to flash the backend flash. I'll gladly pay to rent the cable. Won't even use a VIN slot.
|
10-30-2014, 08:29 AM | #3 |
Colonel
188
Rep 2,224
Posts |
Thanks. I need to find out more about which backend flash is appropriate for pump gas and stock turbos. I also want to disable the cat codes while leaving other error codes intact, while still being able to pass emissions with a DPfix.
I'm not catless yet. Just in the planning stages. |
Appreciate
0
|
10-31-2014, 05:00 PM | #4 |
Lieutenant
72
Rep 524
Posts |
If your not using e85 or meth, stick to the pump flash but if you use the bms flash, it shuts off all the monitors so you would have to go to like wedge or ptf and ask for them to leave the monitors on. Honestly I recommend investing in the cable so u can just flash back and forth so the light stays off with the backend because the monitors are off and then putting the stock flash and dpfix on for inspection
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|