|
|
|
|
Post Reply |
|
Thread Tools | Search this Thread |
10-02-2014, 09:52 PM | #1 |
d[-_-]b
484
Rep 968
Posts |
Old runflats and hit a pothole.. Strange sounds coming from the tire.
Hey guys.
I have 30k on my runflats. I know that's way too many miles. I was actually going to trade my car in at the end of the year so I was holding off... Anyways I was driving home tonight and it was really dark and I must have hit a pot hole because it sounded horrible and my low tire pressure light for my front right tire came on. I pulled over but there are very few lights where I was and it didn't even look like the tire was flat. So as I got closer to home I put my windows down and noticed on every rotation it was making a horrible screeching sound, very loud also. I got home and it's still way too dark but the tire didn't look that low and I couldn't see any other damage. Anyone know what the screeching sound might be, could something else have broke when I hit the pothole? The car seemed to be driving straight and I will take a closer look in the morning but if the tire isn't flat what the hell is making that screeching noise? Any ideas? Thanks |
10-02-2014, 10:02 PM | #3 |
d[-_-]b
484
Rep 968
Posts |
|
Appreciate
0
|
10-02-2014, 10:13 PM | #4 |
Major General
43281
Rep 7,224
Posts |
Probably hard to tell in the dark. Have it put up on a lift and remove the wheel and have everything examined thoroughly.
__________________
|
Appreciate
0
|
10-02-2014, 10:24 PM | #5 |
d[-_-]b
484
Rep 968
Posts |
|
Appreciate
0
|
10-03-2014, 05:55 AM | #7 | |
Banned
1130
Rep 4,686
Posts
Drives: L'Orange
Join Date: Jul 2013
Location: Brooklyn, NYC
|
Quote:
|
|
Appreciate
0
|
10-03-2014, 09:27 AM | #8 | |
Lieutenant
28
Rep 454
Posts |
Quote:
I couldn't tell my rim was bent by looking at it, but when they pulled the tire off we could see it pretty easily.
__________________
2013 Jet Black 135is | 6MT | Coupe | #381/586
Last edited by owen2001; 10-03-2014 at 04:14 PM.. |
|
Appreciate
0
|
10-03-2014, 01:03 PM | #9 |
d[-_-]b
484
Rep 968
Posts |
Took it in and the tire just popped no bent rim.
New Question: I am trading it in this month anyways, if I put regular tires on it will it reduce my trade-in value? |
Appreciate
0
|
10-03-2014, 01:33 PM | #10 |
Lieutenant
86
Rep 524
Posts |
Are you trading it in at a BMW dealer? If so, possibly. If not, I would say it won't reduce the value by much. Most used 1ers that I looked at from other non-BMW dealers didn't have run-flats on them.
The amount you will save by putting fresh regular tires vs RFTs is probably greater than what you would lose from the trade, if any.
__________________
'13 128i | 6MT | SGM | Black Boston | Black Gloss | Lighting | Premium | Tech | HK | Anti-Theft | [CDV-Delete | Clutch Stop | 30% Pinnacle]
Ordered 2.23 | Production Begin 3.7 | Ends 3.15 | Released to carrier 3.18 | At port 3.19 | Departed 3.23 (K-line to Brunswick) | Arrived 4.7 | Truck 4.12 | Dealer 4.19 |
Appreciate
0
|
10-03-2014, 01:51 PM | #11 | |
d[-_-]b
484
Rep 968
Posts |
Quote:
|
|
Appreciate
0
|
10-03-2014, 01:56 PM | #12 |
Lieutenant
86
Rep 524
Posts |
There's a decent chance they won't even look at the tires. If they do, it might only be to see if they still have tread left. I would go the cheap route.
__________________
'13 128i | 6MT | SGM | Black Boston | Black Gloss | Lighting | Premium | Tech | HK | Anti-Theft | [CDV-Delete | Clutch Stop | 30% Pinnacle]
Ordered 2.23 | Production Begin 3.7 | Ends 3.15 | Released to carrier 3.18 | At port 3.19 | Departed 3.23 (K-line to Brunswick) | Arrived 4.7 | Truck 4.12 | Dealer 4.19 |
Appreciate
0
|
10-03-2014, 02:21 PM | #13 |
Major General
43281
Rep 7,224
Posts |
I got a flat in my runflat equipped 135i last year and there was no drama at all. Didn't even know I had the flat until the TPMS notified me. Tried to put some air in the tire but it would accept none. Drove cautiously to get a new tire and while driving it didn't feel bad or anything, and I also didn't hear anything different.
__________________
|
Appreciate
0
|
Post Reply |
Bookmarks |
Tags |
pothole, run flats |
Thread Tools | Search this Thread |
|
|