CPE

135iguy10 · 04-15-2012, 06:51 PM

Does anyone have any of these mods on their 1er, below is my plan.

Im thinking these are my Next mods : fmic, exhaust with highflow cat bov and intake from CPE along with stage 2 aggressive AccessPort tune.

I'm told 400hp is where I should be at.

NorthwestN54 · 04-19-2012, 06:50 PM

Make sure that exhaust includes downpipes. 400 is fairly close, I got around 365 rwhp with similar mods but that's with 91 octane. If you have 93 around where you live, it would be alot closer to 400.

Shouldn't really run stage2 without dps, but if you do get the dps and have an intercooler, run stage 2+ fmic. It's a large bump over stage 2.

135iguy10 · 04-20-2012, 04:27 PM

Quote:

Originally Posted by NorthwestN54

Make sure that exhaust includes downpipes. 400 is fairly close, I got around 365 rwhp with similar mods but that's with 91 octane. If you have 93 around where you live, it would be alot closer to 400.

Shouldn't really run stage2 without dps, but if you do get the dps and have an intercooler, run stage 2+ fmic. It's a large bump over stage 2.

Thanks a lot! Hmm this thread does help. I'm doing this next summer since I just did H&R sways & KW V1 coilovers. ...you don't have 93? Thts odd. Where do u live?

ken1137 · 04-20-2012, 04:55 PM

+1 on DP's with the other bolt ons. CPE has them available but I like AR DPs

135iguy10 · 04-20-2012, 07:44 PM

Quote:

Originally Posted by ken1137

+1 on DP's with the other bolt ons. CPE has them available but I like AR DPs

Thanks for the advice. I can't wait to put these parts in

04-15-2012, 06:51 PM	#1
135iguy10 Enlisted Member 5 Rep 37 Posts Drives: 135i 2010 Alpine White Join Date: Apr 2012 Location: Hanover Park iTrader: (0)	CPE Does anyone have any of these mods on their 1er, below is my plan. Im thinking these are my Next mods : fmic, exhaust with highflow cat bov and intake from CPE along with stage 2 aggressive AccessPort tune. I'm told 400hp is where I should be at.
	Appreciate 0 Tweet Quote

04-19-2012, 06:50 PM	#2
NorthwestN54 Private First Class 8 Rep 104 Posts Drives: 2008 135i Join Date: Jun 2011 Location: Washington iTrader: (1)	Make sure that exhaust includes downpipes. 400 is fairly close, I got around 365 rwhp with similar mods but that's with 91 octane. If you have 93 around where you live, it would be alot closer to 400. Shouldn't really run stage2 without dps, but if you do get the dps and have an intercooler, run stage 2+ fmic. It's a large bump over stage 2. __________________ 2008 E82 - 6 speed - CP-E Downpipes - Berk Mids - Hartge axleback - BMS DCI - Cobb Stage 2+ - Helix FMIC - Modified CDV
	Appreciate 0 Quote

04-20-2012, 04:55 PM	#4
ken1137 Brigadier General 89 Rep 3,732 Posts Drives: BMW S1000XR Join Date: Jun 2011 Location: Gilbert, AZ iTrader: (7) Garage List 2009 e90 335i [6.40]	+1 on DP's with the other bolt ons. CPE has them available but I like AR DPs __________________ BMWCCA member
	Appreciate 0 Quote