|
|
|
10-13-2014, 10:50 PM | #1 |
Captain
428
Rep 715
Posts |
Bilstein Clubsport Coilover settings on 1M
I am looking for some advice on how to set these up.
Obviously, my current alignment settings will have a far greater impact on handling balance than the adjustments I can make to compression and rebound. I've read around on general setup advice but I'm most interested in: 1) Advice on these coilovers in particular 2) Setup for the tracks we have here in Victoria, Austalia (bit of a long shot I know). At the moment the car has Michelin PSC 2s, Endless ME20 pads with braided lines and RBF 660, with 2.5 degrees negative camber on the front with 1.5 at the rear, zero toe on the front and 2 total on the rear. Cheers, Rohan
__________________
M4 Times (PSC2): Sandown: 1.21.76 Winton: 1M Times (PSC2): Phillip Island: 1.53.09 Sandown: 1.24.03 Calder Park: 1.07.31 Winton: 1.36.71 |
Post Reply |
Bookmarks |
|
|