|
|
|
10-07-2012, 12:06 PM | #1 |
Major
200
Rep 1,207
Posts |
New iPhone 5 Cradle - Self made DIY
I have managed to get a DIY cradle for the new iPhone 5 that sits in the central console and fits the new iPhone 5 perfectly (with a case).
I had the iPhone4S cradle and was very disappointed that BMW have not yet made a iPhone5 cradle and it seems we cannot expect one at least for 6 months. So, I set upon making one myself - not exactly a cradle but something to hold the phone and connect to the USB cable without having to fiddle with the tiny lightning connector and slot it each time. Items used: 1. Base plate of the Cradle (blanking plate) 2. Original Apple USB to Lightning cable 3. Filing tools 4. Hot Glue 5. A bit of time... I have used the original USB to Lightning cable for the connection and this provides all features except iPod Out functionality and antennae connectivity. The cynics amongst you might say that one can just use the cable in the USB slot and get the same functionality. Technically you are correct - but what I wanted - the convenience of just placing my iPhone5 and sliding it into the slot (almost like a cradle) - not having to fiddle with the lightning connector each time (trying to fit in the iPhone) - a more aesthetically pleasing solution Photos attached should make it clear as to what I have done. Happy to field any questions..
__________________
---
|
10-07-2012, 01:10 PM | #2 |
Major
231
Rep 1,066
Posts
Drives: 2015 X5 50i M Sport
Join Date: Aug 2007
Location: US of A
|
Great job! Nice and creative
__________________
2019 Cayenne Turbo
Gone but not forgotten: 2006 2.0T A4 Avant, 2007 Z4 Roadster 3.0si, 2006 M Roadster, 2013 550i M Sport, 2015 Cayman S, 2015 X5 50i M Sport |
Appreciate
0
|
10-07-2012, 10:22 PM | #4 |
Second Lieutenant
9
Rep 270
Posts
Drives: F10 520D
Join Date: Apr 2012
Location: Taiwan
|
Well done!
|
Appreciate
0
|
01-17-2013, 07:40 AM | #9 |
Private First Class
76
Rep 187
Posts
Drives: 2017 M2
Join Date: Jun 2012
Location: NJ
|
Performed this within a month of owning. Great Idea!
Couple of tips for 1ers. -Getting the cable routed through the back of the armrest is possible. If you remove the back and loosen the 3 mounting bolts, you can route the wire through the back and then under the center console between the seats. -The place the phone goes in is tight and there is not much space for fat fingers to grab the phone and get it back up. Put a riser underneath ~3/16"thick and the problem is solved. My riser stopped short of the front so I could get my finer under the edge a bit. But through constant use now, I find it not necessary. It'll look better if you just raise the entire deck. Riser is a thin sheet of wood covered in adhesive backed felt. Put in place with hot glue gun. |
Appreciate
0
|
Post Reply |
Bookmarks |
|
|