|
|
|
|
Post Reply |
|
Thread Tools | Search this Thread |
02-16-2012, 12:46 PM | #1 |
Supreme Allied Commander
3808
Rep 54,285
Posts
Drives: F80 M3
Join Date: Mar 2007
Location: Santa Barbara, AP, Brembo, GIAC, Koni, Ohlins, Performance Friction, www.hpautosport.com
|
HP Autowerks | Rogue Engineering E8x Rear Wishbone Bushings - Race
This Delrin compound is designed for TRACK applications, where monoball components are not allowed. Full Delrin bushings, these bushings are extremely stiff to provide the absolute maximum performance at the TRACK.
Fits E82 1M and E9x M3 or any non M with the 1M/M3 upper links/wishbones installed. $395 Ordering details here: http://www.hpashop.com/Rogue-Enginee...ne-bushing.htm |
02-17-2012, 09:22 PM | #2 |
AutoXer
34
Rep 683
Posts |
Those M3 arms have ball joints in one of the positions, so are these then to replace the rubber bushings opposite the ball joint? What tool do you use to press out the OE bushings that these replace?
__________________
2009 135i, Alpine White, 6MT, M-Sport, iDrive, iPod/USB, Heated Seats, Premium Sound, BMW Assist
|
Appreciate
0
|
02-25-2012, 01:50 AM | #3 | |
Supreme Allied Commander
3808
Rep 54,285
Posts
Drives: F80 M3
Join Date: Mar 2007
Location: Santa Barbara, AP, Brembo, GIAC, Koni, Ohlins, Performance Friction, www.hpautosport.com
|
Quote:
You will use a bushing removal tool or a press with the correct fittings. |
|
Appreciate
0
|
Post Reply |
Bookmarks |
Thread Tools | Search this Thread |
|
|