|
|
|
10-04-2011, 11:19 AM | #23 |
Major
111
Rep 1,338
Posts |
practice practice practice. i find the pedals to be perfectly positioned, and have no issues performing smooth heel-toe shifts in any scenario from a 4-3 shift on the track (brake buried, moderate blip) to a 2-1 shift pulling into my driveway (feathered brake, deep blip). i'm a bit of a heel-toe nut, but i heel-toe literally every single downshift except (obviously) for when i drop a gear to accelerate, in which case i just match revs. obviously the 2-1 heel-toe downshift pulling into my driveway is totally unnecessary, but i like to keep my teeth sharp. :-D
adding a pedal with an extension would likely make this much harder (i think) because you'd have the brake and gas extremely close together. i needed pedals on my old audi s4, but on my e46 m3 and this car (and every bimmer i've ever driven), the pedals feel spot on for heel-toe. |
Appreciate
0
|
10-05-2011, 09:36 PM | #24 | |
Major General
890
Rep 7,047
Posts |
Quote:
"Heel/toe" isn't necessarily literal. As fun and challenging as this can be, I LOVE Nissans "syncro rev", or what ever they call it, in the 370Z. It's perfect. Yes, it removes the need for the driver to do "heel/toe" perfectly, but the system executes the rev match perfectly. It's quite nice. You can turn it off if you really want to practice the organic "proper" heel/toe. But, if my 135i had it I don't think I would turn it off. I know, I know, next I'll be saying I want DCT in my next car. Uh.....actually, I do. |
|
Appreciate
0
|
10-05-2011, 09:55 PM | #25 | |
Major General
890
Rep 7,047
Posts |
Quote:
It works based on your speed, but more so on how fast you release the throttle and get on the brakes. The faster you go to the brake from the throttle the greater amount of brake boost the system gives. It's supposed to be a "safety" feature. The idea is that if you're moving off the throttle and quickly to the brake, then you must want or need to stop as quickly as possible. And, since most people don't apply the brake pedal pressure as hard as they should, the system will boost brake pressure to a greater level so as to apply greater brake force. I experienced this a couple of times and I'll have to say it works. I was traffic on day and we were at a stop light. The light went green, we started moving. I was up to about 30mph. I got distracted for a split second, thinking we were moving so all was well. As soon as I looked up bright brake lights in front of me. I quickly went for the brake. The brakes bit HARD. So much that I went forward and the seat belt gripped hard. I had room to stop, but going that fast from throttle to brake activated that feature. I've also noticed one time while on the highway. I was going about 55mph, no cars near me. For some strange reason my throttle foot slipped and hit the brake with not much pressure from me, but the braking force was immediate and immense, such that I was thrown into the belt as if I had stomped on the brake. Maybe some of you are experiencing this feature as "too grabby" or "too much initial bite". For me, I think BMW brakes are quite good. When braking normally I have no "grab" or anything like that. The brake pedal doesn't have a lot of movement like many other cars. Stopping force feels linear to the amount of force you apply to the brake pedal. Porsche brakes are awesome. Almost no brake pedal travel, just more braking as you apply more pressure. Many people don't like that, as they are used to equating stopping force with more brake pedal travel. |
|
Appreciate
0
|
10-05-2011, 11:18 PM | #26 |
Private First Class
6
Rep 170
Posts |
Fwiw I've found the 135 to be fairly easy in general and much more natural than my last couple cars (mazdaspeed3, wrx).
__________________
08' 135i MT || Cobb Stage 1 'Aggressive' 4.01 Map | BMS DCI | Berk Mid Pipes | Maddad Eurosport Axleback | E93 FSB | M-Sport Black on Black | CDV Delete ||
|
Appreciate
0
|
10-06-2011, 06:28 AM | #27 | |
First Lieutenant
12
Rep 317
Posts |
Quote:
I've never experienced the Nissan system but I'm guessing that it is more for the sound of it as well as reason 2 above - which is why it would make sense to switch it off if you wanted to change down properly without putting undue stress on the syncros. The DCT definitely only does the blip for the second reason above as it pre-engages a lower gear before you even flick the paddle (or stick) hence reason 1 doesn't get a look in.
__________________
BMW - 135i DCT
Audi - Q5 3.0TDI |
|
Appreciate
0
|
10-06-2011, 08:00 AM | #28 |
Lieutenant
7
Rep 443
Posts |
FWIW, it is more like heel/ball, or heel/arch for me, and many others, I suspect. If I really had my toes on the brake, I couldn't possibly get my heel on the throttle. Feet are too big. Or, maybe I could do arch/toe, but heel/ball seems to be the best fit.
After I noticed, I tried it with my toes on the brake, and it was actually pretty uncomfortable, and nearly impossible, to blip the throttle. That may be where some people are having trouble. But, as I said in another post on the subject, I am sure my technique is far from ideal, so YMMV.
__________________
Because... grocery getter. |
Appreciate
0
|
10-06-2011, 09:47 AM | #29 |
Colonel
37
Rep 2,084
Posts |
Lots of people here have replaced the OEM brake pads with aftermarket pads to get rid of the extreme initial bite, and it works. The difference is like night and day.
|
Appreciate
0
|
10-08-2011, 08:03 PM | #30 | |
Major General
890
Rep 7,047
Posts |
Quote:
Nissans tech is not designed for sounding good, it's designed to match engine revs during gear changes on down gear accel or decel. When coming into a turn from speed you simply concentrate on braking, and it handles the rev match. The only reason to shut it off is so that you can practice heel/toe. Here's a good read for it: http://www.caranddriver.com/features...ined-tech_dept 2 different things in your post, "rev matching" and "heel/toe". Heel/toe can be used to facilitate a rev match, but you don't need to heel/toe to make a lower gear engage easier, such as when accelerating using a lower gear from the higher gear you are in. In that situation, you don't heel/toe, you match revs with throttle control/"blip". I don't agree about what you propose as the 2 "key" reasons for rev matching, though those are 2 things helped by rev matching. More importantly, imo, rev matching is to protect against drive line shock, and by virtue of that, it keeps the car smooth by not unsettling the chassis, for smoother handling, and reducing stress to the drive line. Avoiding compression braking is an important part of that, as you mention. Rev matching is not done just for slowing down. It's also the proper way to execute acceleration when downshifting a couple of gears, such as for passing. By matching the revs to the lower gear, your car accelerates smoothly instead of bogging/dragging down the engine when engaging a lower gear to accelerate. Nissans system does all this very nicely I might add. You really should try it out, it's awesome. Double clutching and heel/toe are not the same thing. Dbl clutching is a technique used in old manuals that didn't have syncro's. Double clutching is a technique to achieve rev-matching the transmission's *intermediate shaft* to the output gear that is to be selected. In a modern manual trans we have syncros so we don't need to double clutch. Heel/toe is a different technique by which to rev match engine speed to vehicle speed for a given gear, when you need to brake while at the same time changing to a lower gear. The DCT, and all other dual clutch trannies, are programmed to do what a driver would do. The system automatically performs rev matching on decel and accel, as I'm sure you're already aware. It just does it faster and better than pretty much all drivers. Last edited by RPM90; 10-08-2011 at 08:28 PM.. |
|
Appreciate
0
|
10-08-2011, 08:09 PM | #31 | |
Major General
890
Rep 7,047
Posts |
Quote:
I just offered that info to explain why some may feel initial braking may be too grabby. Personally, I don't feel the OEM brakes have too much initial bite at all. I think the OEM brakes are excellent for a DD sporty automobile, and they modulate very well. If I were tracking the car, I would change the pads no question. For my daily driving and back road fun the OEM's setup works great. The only time I've felt a hard initial bite or grab is when the brake boost activates, but that has worked great for me as well. |
|
Appreciate
0
|
10-09-2011, 12:39 AM | #32 |
First Lieutenant
30
Rep 362
Posts |
you and I have very similar car histories. I went from an 01 S4 to my 135. Were you on Zine or Audiworld?
__________________
Alpine White E82 135i 6spd Manual
Factory Alarm | Clutch Stop | Alflugen 18 CS7 Hyper Silver Shadow Blue MK6 GTI 4-Dr DSG Euro OEM Reverse Camera | |
Appreciate
0
|
10-09-2011, 07:38 AM | #33 | |
First Lieutenant
12
Rep 317
Posts |
Quote:
I don't doubt that the Nissan system does a great job of matching revs but really that is the easiest part of the whole process. That is why I say it is of dubious value if you are really serious about changing gears AND preserving your gearbox. Remind me not to buy a second hand manual car from you
__________________
BMW - 135i DCT
Audi - Q5 3.0TDI |
|
Appreciate
0
|
10-09-2011, 12:53 PM | #34 | |
Captain
118
Rep 888
Posts |
Quote:
http://www.flickr.com/photos/mgbigai...7622374396854/
__________________
M
|
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|