08-27-2013, 04:13 PM | #1 |
Enlisted Member
10
Rep 43
Posts |
High oil temps
Has anyone implemented a solution that works to control the high oil temps (> 285) seen when a 1M is tracked? I've got the oil cooler from Evolution Racewerks installed and it really hasn't changed the temps I'm seeing.
I've got lots of history data from my AIM data collection system showing the oil, water and external temps but haven't been able to identify a pattern. One thing that's obvious is that quick increases in oil temp start to happen once the water temp is above 210 or so. I've changed the oil to Motul 8100 5w-40 and am planning to try the following the next time I'm at the track: 1. Red Line water wetter or the Motul equivalent 2. Burger Motorsports low temperature thermostat Anyone have some additional ideas? My cars got about 7,000 miles on it with about 4,000 of that on the track. Thanks for your help. Here's a link to a Google spreadsheet showing data from 74 track sessions. Contains oil, coolant and outside temps. https://docs.google.com/spreadsheet/...UE&usp=sharing
__________________
2011 1M AW, 2011 A3 TDI, 2013 Mini JCW, 2014 F150, 2016 Focus RS on order
Last edited by mclemens; 08-28-2013 at 11:28 AM.. Reason: Added link to Google spreadsheet showing oil temps |
08-27-2013, 04:34 PM | #2 | |
Banned
7905
Rep 11,785
Posts |
Quote:
Last edited by M3 Adjuster; 08-27-2013 at 04:39 PM.. |
|
Appreciate
0
|
08-27-2013, 04:55 PM | #3 |
Captain
56
Rep 865
Posts |
I would like to address this issue as well, glad you posted this. M3adjuster and I attend a lot of the same events in the Texas heat...
One thing that is bound to help is spending as little time as possible at or near the rev limiter. Unlike our S54/S65 brethren, the N54 does not need to be revved to the heavens to achieve peak power. Lately (last track day) I shifted ~6k RPMs and didn't notice temps going about ~245-250 or so. I am disappointed to hear that the ER Oil-cooler hasn't helped much. I want to add one for peace of mind, and I guess I will go custom with a Setrab core and see if that is any better. One problem I see here is that since my 1M is my DD and my commute is so short (~10 miles a day), will I have a hard time achieving optimal oil temps driving around town? What other variables could effect the oil temp (and the engine temp)? Upgraded/larger radiator/fan? Intercooler? I am not mechanically savvy enough to know the true root of the problem. I do know that high oil temps are a symptom, but are they the real, underlying issue that we should fear? My car is stock engine wise and has been reliable thus far, no issues. I would love the added peace of mind if we could determine the proper solution to high oil temps and potential limp mode... Last edited by lcrain; 08-27-2013 at 05:05 PM.. |
Appreciate
0
|
08-27-2013, 05:49 PM | #4 |
Major
450
Rep 1,358
Posts |
All the items you are mentioning should help. The lower temp thermo should be of benefit too. Will take forever to get up to temp on the street with that mod but not a problem on the track. I'm surprised your larger intercooler hasn't helped. I've not been able to get my car past about 270 with the Helix installed.
Another option to get then temps down is what several race teams have done which is change out the radiator. I believe HP Autowerks has done this with excellent results on one of their race cars. |
Appreciate
0
|
08-27-2013, 08:57 PM | #5 |
Let's save military ranks for those who earn it!
45
Rep 1,161
Posts
Drives: ...on the Ragged Edge
Join Date: Dec 2008
Location: Edmonton, AB, Canada
|
I just had my car out on track Friday, and did three 20min stints back to back to back. It was about 26deg Celsius, and my oil temp barely crept past 120deg Celsius.
This is on Mobil-1 0W40.
__________________
Richard
2013 BMW M3 Individual -- Fire Orange (sold) 2013 BMW X1 xDrive35i M-Sport -- Valencia Orange (sold) 2011 BMW 1-series M Coupe (#205/220) -- Valencia Orange (sold) 2009 BMW 135i M-Sport Coupe -- Space Grey (sold) |
Appreciate
0
|
08-27-2013, 09:51 PM | #6 |
Major
168
Rep 1,479
Posts
Drives: 2017 F80 M3
Join Date: Dec 2010
Location: Houston, TX
|
High engine speed, high ambient temps, high turbo boost/rpm, and low air flow all contribute to high engine temps. Time on a track is meaningless.
__________________
_______________________
1991 E30 M3/Brilliantrot 2017 F80 M3/AW |
Appreciate
0
|
08-27-2013, 10:09 PM | #7 |
Major
450
Rep 1,358
Posts |
Wrong. It is all interrelated.
As well as allowing a greater mass of air to be admitted to an engine, intercoolers have a key role in controlling the internal temperatures in a turbocharged engine. When fitted with a turbo (as with any form of supercharging), the engine's specific power is increased, leading to higher combustion and exhaust temperatures. The exhaust gases passing through the turbine section of the turbocharger are usually around 450 °C (840 °F), but can be as high as 1000 °C (1830 °F) under extreme conditions. This heat passes through the turbocharger unit and contributes to the heating of the air being compressed in the compressor section of the turbo. If left uncooled, this hot air enters the engine, further increasing internal temperatures. This leads to a build-up of heat that will eventually stabilise, but this may be at temperatures in excess of the engine's design limits- 'hot spots' at the piston crown or exhaust valve can cause warping or cracking of these components. High air charge temperatures will also increase the possibility of pre-ignition or detonation. Detonation causes damaging pressure spikes in the engine's cylinders, which can quickly damage an engine. These effects are especially found in modified or tuned engines running at very high specific power outputs. An efficient intercooler removes heat from the air in the induction system, preventing the cyclic heat build-up via the turbocharger, allowing higher power outputs to be achieved without damage. |
Appreciate
0
|
08-27-2013, 11:48 PM | #8 |
Captain
118
Rep 888
Posts |
The Burger Motorsports low temperature thermostat is the best mod for the oil temp issue with the N54. My temps take about 2mins longer to warm up and the car never has gone above 235F. I used to see close to 250F when beating on it for awhile but now they stay below 235F and in the optimum range for oil while cruising which is around 210-220F. In the winter months you might want to take it out but its literally a 5min install.
__________________
M
|
Appreciate
0
|
08-28-2013, 02:16 AM | #9 |
Colonel
171
Rep 2,682
Posts |
Try to remove the engine cowl and possibly the cabin filter as well when you're racing. It will help a lot of the hot air in the engine bay to escape. When I do this I literally see the air shimmering in front of my windscreen when stopped.
__________________
|
Appreciate
0
|
08-28-2013, 09:48 AM | #10 |
Colonel
291
Rep 2,898
Posts |
My thoughts:
1) I have the absolute largest Setrab core that can be fit in a 1M. RRT Racing installed a 40 row, approx. 12"X 13" Setrab cooler with proper ducting/venting that reduced my on-track high temps from 285-290 to approx. 265. Although I have no experience with it (and run a very nice ER charge pipe), I don't believe that RRT was impressed by the fit of the ER oil cooler. 2) Although there is mounting evidence that it works, I'm not sure I get why a thermostat delete (or lower temp thermostat) would lower road course track temps, where the car is under extraordinarily heavy load and the stock thermostat is fully open. Yes, it should keep the oil cooler under low load conditions (like on the street). But since it doesn't actually add any thermal capacity to the cooling system, it strike me that it should have no effect on oil temps once it is fully open. The only thing that makes sense to me -- and that has been suggested to me by a number of knowledgeable folks -- is that the design of the stock thermostat constricts the flow some, even when fully open. FWIW, I'm considering removing the stock thermostat, but adding an Improved Racing 212 degree thermostat when it becomes available. Neil EDIT: Running distilled water with water wetter or Motul mocool (?) will also help some, as water is a more efficient medium for heat transfer than coolant. I'm also planning to experiment with removing the cowl. Last edited by MDORPHN; 08-28-2013 at 10:56 AM.. |
Appreciate
0
|
09-02-2013, 11:06 PM | #12 |
1Mtech
0
Rep 62
Posts |
We have come up with a fairly comprehensive solution regarding cooling, in association with PWR.
1x PWR main radiator 1x rhs Oil cooler 1x lhs oil/coolant cooler We also use a custom oil diverter. Different air ducts are required as well, which we designed. Coolant temp in race condition is no higher than 107degrees C. PM for further details if interested, this is really to suit race application. |
Appreciate
0
|
09-03-2013, 05:38 PM | #14 |
1Mtech
0
Rep 62
Posts |
Ill grab some quick photos today. The coolers in each wheel arch retain the origional mounting points. However, routing of the lines is changed. The opening in the inner arch liner(to allowe the air flow) is not big enough(the coolers on each side are doubled in size). We grafted in X5M(from memory) inner arch liner vents, not the prettiest but it achieved the desired result within a small time frame.
|
Appreciate
0
|
09-03-2013, 06:12 PM | #15 |
1Mtech
0
Rep 62
Posts |
The cooler shown is for the LHS which we trialed early during the development(we now use a split cooler of the same size, top is coolant, bottom is oil) and the RHS is oil only cooler and the same as shown(but obviously to suit RHS). The main radiator is a drop in replacement. We designed this system to retain all the BMW standard connections(additional coolant/oil lines are required to be made however to connect it all). The only real change is a slight tweak at the 1 way valve for the standard additional coolant cooler.
If interested Im sure we could provide a complete kit(coolers, lines, oil thermostat replacement, adaptor fittings) and fitment/instructions on fitment. |
Appreciate
0
|
09-05-2013, 07:55 AM | #18 |
Enlisted Member
10
Rep 43
Posts |
High Oil Temps - Update
I drove at Road America on 9/3 after having made some changes to help control oil temps. I changed to Motul 8100 5w-40 oil, added 500ml of MoCool to the radiator and installed the BMS low temperature thermostat. These changes did contribute to lower oil temps - 275f instead of 285f.
I got another 10f degree reduction by not running RPMs above 6000 or so. Normally I can drive at Road America and only use 3rd and 4th gears with lap times in the 2:38 to 2:40 range. I changed to also use 5th gear and was able to maintain the same lap times and max speeds (155mph) with a couple of laps at 2:37. I have the ER oil cooler installed but without any shrouding. My next change will be to install shrouding to block the areas where air can escape without flowing through the oil cooler.
__________________
2011 1M AW, 2011 A3 TDI, 2013 Mini JCW, 2014 F150, 2016 Focus RS on order
|
Appreciate
0
|
09-05-2013, 11:40 AM | #19 |
Major
450
Rep 1,358
Posts |
|
Appreciate
0
|
04-15-2015, 09:42 PM | #21 |
Colonel
2617
Rep 2,819
Posts
Drives: e82 1M, f87 M2cs
Join Date: Nov 2011
Location: Tri-Cities, Washington
|
I have my first track day coming up and just bought some Redline water wetter. This is the first time I took a close look at our coolant reservoir.
If I pour water wetter in the reservoir, will it mix into the system or just stay there? Obviously it will mix in over time from expansion and contraction, but it does not appear to me that coolant flows through the reservoir. Is there another point where it can be poured in without draining the system? |
Appreciate
0
|
06-16-2017, 10:43 PM | #22 |
Private First Class
71
Rep 198
Posts |
reviving the beaten to death thread, calling all 1m/n54 owners tracking their beasts, anyone been running a solution they could recommend? i would like to running a larger oil cooler in the stock location and have been looking at the dinan and er ones (can't seem to find any other companies AR? VK? for the 1m) but from what i've read a single er is kinda meh and i haven't found a thread with anyone tracking their dinan one, what have you guys been running? i just ran at buttonwillow in socal at 80 degree ambient temps and my car was easily getting to 270-280 and this is with the csf radiator running about 75% water + Redline water wetter and coolant. car is definitely more steady with its temps with the csf radiator and the cooldown is amazing compared to stock but i would like to combat the oil as well. currently running bmw 5w30, have about two changes left, but after thinking of going to a 5w40 or 0w40 for the summer track days (us U.S. cars are supposed to stick to ll-01 right vs ll-04 yes?) thanks team
oh also, how's your oil cooler been for dailying? i would like a solution that doesn't keep the car from reaching solid operating temps, i've read that the stock oil cooler has a bypass which i understand most aftermarket kits rid of when installed and was wondering how its been affecting peoples dailying/short drives.. if you guys daily your 1m's at all of course haha *shyly asks but yeah haha, would love to hear from you experienced trackers oh forgot to mention, car is stock minus the radiator and charge pipe and soon to be HMS axleback Last edited by digwm1; 06-16-2017 at 10:54 PM.. |
Appreciate
0
|
Post Reply |
Bookmarks |
|
|