BBS-CH-R Wheels

[Upturn666]

Considering a set of BBS's for my 1M but just wondered if someone could advise me on sizes. I am wanting to stay as near to stock as possible and use the same stock tyre sizes but the options on BBS are;
19 x 9 et20 or et44, which is best and will both clear the wheel arch ok
19 x 10.5 et 25 rear, will these work with standard tyres and clear the wheel arch.
Many thanks.

[Artemis]

ET/offset of the BBS CH-R on my 1M:
front: 20mm (stock 1M wheels = 31 mm) | rear: 25mm (stock 1M wheels = also 25mm).
(http://www.1addicts.com/forums/showthread.php?t=653581)

To show the difference between a 20mm offset compared to the stock 31mm offset (front)...
http://www.willtheyfit.com/index.php...&Submit=Submit

...and a 40mm offset compared to stock 31 mm (front)
http://www.willtheyfit.com/index.php...&Submit=Submit

And here's the difference of stock 10 width versus BBS CH-R 10.5 width (rear):
http://www.willtheyfit.com/index.php...&Submit=Submit

[Artemis]

Additional info (source: http://www.rimsntires.com/specs.jsp):

Left: stock 1M front rim (ET 31) | Right: BBS CH-R 19" front rim with ET 44



Left: stock 1M front rim (ET 31) | Right: BBS CH-R 19" front rim with ET20

[Roc'n///M]

Has anyone seen a picture of a BSM with the gunmetal grey rims, stock sizes or otherwise?

[Artemis]

Originally Posted by I ///M Gone

Has anyone seen a picture of a BSM with the gunmetal grey rims, stock sizes or otherwise?

For a simulation by tirerack.com:
http://www.tirerack.com/wheels/MiniW...d=true&sw=1280 (left panel for selecting BSM, AW or VO simulation)
http://www.tirerack.com/wheels/resul...All&sort=Brand (for BBS wheels selection + "View on Vehicle" option)

Quite some pictures floating around (http://www.1addicts.com/forums/showp...0&postcount=11), but I only recall one picture of a BSM with 19" BBS CH-R gunmetal ("Satin Titanium"). Picture quality is so-and-so. It was posted by fellow member Chapman1977: