|
|
|
04-11-2010, 02:46 PM | #1 |
New Member
0
Rep 8
Posts |
New to the forum 2010 128i
Hi,
I am new to the forum. I picked up a 2010 128i on Friday. It is used, but just over 6K miles. it is jet black with taupe interior. I will hopefully post picks soon. I managed to wash it today and noticed the hood has a ton of water spots that look like crap. I am new to detailing and have been scanning the forum for the best way to take of it without an electric sander (I am currently in Italy and not sure if an orbital sander would work properly with a 220 transformer). I look forward to learning a lot about the one series. Thanks, Chris |
04-11-2010, 04:58 PM | #3 | |
NCO
13
Rep 641
Posts |
Quote:
Best to get it professionally detailed, if you're not sure what you're doing, IMO. Best value for money I ever spent! pge |
|
Appreciate
0
|
04-11-2010, 10:20 PM | #4 |
Captain
64
Rep 671
Posts |
Since I believe in starting with the least aggressive procedure when working on correcting any car's finish, then yes, I would wash and clay first.
Then, take a good, close look at the car, preferrably in direct sunlight. If you see the water spots (and I wouldn't be surprised if you do), then it will be time to polish out the imperfections. I use a random-orbital polisher, one that was actually originally developed as a sander, with polish, and foam pads, to polish out defects. Actually, you are not polishing out defects, but rather "levelling" the finish of the paint to the depth that the imperfections do not show, or do not show as much. Typically, a random-orbital polisher is less aggressive than a rotary, often used by professional detailers and body shops. IMHO, rotaries aren't for rookies, though they can achieve spectacular results. If you are not familiar with machine-polishing, it might be best to have a good detailer work on it, until you pick up on the learning curve (it's not that hard). For detailing help, Autopia.org is a great place to look. Beware! Jet Black seems to be prone to picking up etching from water spots, swirl marks, etc. It looks insane when finished out well, but can prove to be a handful of work. Hope this helps. Enjoy your 128! Mine is a fun car to drive everyday. Enough power to be entertaining (I have no use for a 135 with a tune where I live), and a very nice handling car. A nice car to take out for a drive, and enjoy the moment. |
Appreciate
0
|
04-12-2010, 01:14 PM | #5 |
New Member
0
Rep 8
Posts |
Thanks everyone for your replies. I am currently in Italy and that makes it a little harder to find a "pro" to do the detail. Even if I could, the euro/dollar rate might make it very expensive.
This is all pretty new to me. I have been reading a lot and watching some you tube videos. I appreciate everyone's suggestions. I will probably order some no-rinse and micro-weave towels and try that first. Thank you for the suggestion about autopia.org. I am scouring that site. Chris |
Appreciate
0
|
04-12-2010, 01:37 PM | #6 |
Major
141
Rep 1,401
Posts |
Check in with the e90post detailing forum:
http://www.e90post.com/forums/forumdisplay.php?f=13 It's devoted to this exact topic and contains a lot of good information. |
Appreciate
0
|
04-12-2010, 03:47 PM | #7 |
Major
31
Rep 1,107
Posts |
Man, that sounds like a nice car, I love my 2010 128i. The Jet Black marks up really easily, but that should all come out with a thorough paint cleaning and a good wax job!
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|