|
|
|
04-21-2009, 03:28 PM | #1 |
All your 1 are belong to us!!!
20
Rep 658
Posts |
Anyone have corrosion on wheel hubs/brakes?
Just wondering if anyone else here has or had problems with their wheel hubs corroding, either from the car sitting outside in the elements or otherwise. My car has some bad oxidation on all 4 wheel hubs, particularly the left and right rear. It was a May '08 build car that I bought from a dealer in the snow belt in late February, and the corrosion was on the car when I took delivery of it. I flew in from out of state to pick the car up, and unfortunately didn't have the time to check the car really carefully when I got it.
I'm just wondering: 1. If anyone else has noticed this and its a common issue. I expect it may be for folks that are up north, and the wheel hubs are a problem area because they don't receive any corrosion protection when they're produced. 2. If it's reasonable for me to ask the selling dealer and/or BMWNA to correct the problem, or if this is considered inevitable, ordinary wear and tear that I shouldn't worry about. FWIW I did send an e-mail to the selling dealer after I got the car home, washed it, and determined it would not come off in detailing. The only reason it bothers me is that it is unsightly, particularly looking at the car from within a few feet. Any thoughts are appreciated! |
04-21-2009, 04:56 PM | #2 |
Private First Class
4
Rep 172
Posts |
I know what you are talking about. It is part of the normal rusting process that I'm sure is accelerated by the road salt that we have to deal with during northern winters. I'm wondering if anyone has tried to spray paint them with some kind of high temperature silver metallic paint. If so, I'd like to see some pictures!
|
Appreciate
0
|
04-21-2009, 05:06 PM | #3 |
Captain
21
Rep 774
Posts |
It's normal, more so if you are in a cold and damp area, or a warm and humid area, or a ....It's normal. Go look at new cars on the lot, and you will see it on them. it does not harm....
|
Appreciate
0
|
04-21-2009, 06:51 PM | #4 |
gone but not forgotten
35
Rep 985
Posts |
I havent had any crosion problems. I live on the coast too. So maybe you just have bad luck?
__________________
Our Lady of Blessed Acceleration don't fail me now.
|
Appreciate
0
|
04-21-2009, 07:18 PM | #5 |
Purveyor of fine roads.
17
Rep 339
Posts |
I've never had a car that didn't have the corrosion you speak of. Different brands of rotors do not solve the problem... I would guess that possibly a zinc coating could help, or as others mentioned, some sort of paint.
It's really not that bad if you just ignore it.
__________________
128i alpine | coral | premium | sport | cold | xenons | ipod+usb
|
Appreciate
0
|
04-21-2009, 07:33 PM | #6 |
Free Skier
28
Rep 439
Posts |
I have some rust on inner part of the rims. Just noticed it upon last washing. Seems to have got worse during the winter even tho garage.
They'll probably laugh if you complain. Hey we all age! |
Appreciate
0
|
04-22-2009, 11:53 AM | #8 | |
Moderator
369
Rep 4,745
Posts |
Quote:
Same here. Just on the rotor hats. Perfectly normal.
__________________
Gary. Tire and Wheel Forum Moderator. Tire Rack Sales Rep Gary@Tirerack.com
http://www.tirerack.com/a.jsp?a=AH8&url=index.jsp Please refer to 'Gary/E90 Post' as your previous contact when you order online to help support this forum. |
|
Appreciate
0
|
04-22-2009, 07:30 PM | #9 |
Major
74
Rep 1,001
Posts |
Are you talking of the actual hub face, where the lug bolts screw into, or do you mean more like the rotor hats?
If it is the hub face, was there not a coating of grease or anti-seize on them, between the hub face and the wheel? My cars seem to all have that, and so I replentish it when the wheels are off. Copper high-temp anti sieze, in a very thin layer, should protect and also aid in heat transfer from the rotor to the wheel. If it is the rotor hat, I'd just get some high temperature paint on it. Best method is to remove the rotors, and then mask the friction areas, and spray the hat itself. Id also consider lightly and carefully brushing it on. Worst you can do is do it wrong, and then use some thinner, remove the paint, and do it again. There are also anti-rust compounds designed for guns, EEZOX is one that comes to mind,which you can surely apply to protect the surfaces. Apply it right, and youll never know it is there. |
Appreciate
0
|
04-23-2009, 04:49 PM | #10 | |
Doc Brown
1176
Rep 2,174
Posts |
Quote:
__________________
|
|
Appreciate
0
|
04-24-2009, 04:58 PM | #11 |
Brigadier General
269
Rep 4,470
Posts |
One thing what was noted about the 1 hubs on the latest Edwards blog was that the hubs seem to have no anticorrosion treatment at all and appeared surprisingly rusty to them when they were inspecting the suspension.
__________________
135i, SGM, Coral, Sport Package, Auto, Premium Hifi, USB/ipod, Apex EC-7s, PPK Stage II
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|