Front LCA Camber Bushings

foflo · 05-15-2023, 10:17 PM

This is a long shot, but does anyone have some custom offsets bushings for the front LCA? I see John V. used to make some but it has been a while since any have been requested.

Has anyone else come up with a solution?

May just measure my current busings and lathe my own... But prefer the tried and true!

HP Autosport · 05-25-2023, 06:19 PM

Quote:

Originally Posted by foflo

This is a long shot, but does anyone have some custom offsets bushings for the front LCA? I see John V. used to make some but it has been a while since any have been requested.

Has anyone else come up with a solution?

May just measure my current busings and lathe my own... But prefer the tried and true!

You could do the E9x M arms for additional but none adjustable camber or get these SPL adjustable lower arms:

https://www.hpashop.com/SPL-Front-Lo...rm-E8x-E9X.htm

Have you looked into camber plates?

foflo · 05-25-2023, 06:49 PM

Yeah, I have camber plates and the e9x arms or adjustable are not legal in Scca stx classing.

Yvrbmw · 12-10-2023, 04:27 AM

I posted up an offer to have some made last year but only had one reply. Cost was too much if you can’t design or machine your own.

SKI-R · 12-15-2023, 05:35 PM

https://whitelineperformance.com/pro...-arm-lower-arm

Not bushings on their own, but might be an option.

foflo · 01-19-2024, 08:04 AM

I ended up machining my own, appreciate the recommendation tho.

05-15-2023, 10:17 PM	#1
foflo New Member 8 Rep 12 Posts Drives: BMW 128i Join Date: Jul 2022 Location: United States iTrader: (0)	Front LCA Camber Bushings This is a long shot, but does anyone have some custom offsets bushings for the front LCA? I see John V. used to make some but it has been a while since any have been requested. Has anyone else come up with a solution? May just measure my current busings and lathe my own... But prefer the tried and true!
	Appreciate 0 Tweet Quote

05-25-2023, 06:49 PM	#3
foflo New Member 8 Rep 12 Posts Drives: BMW 128i Join Date: Jul 2022 Location: United States iTrader: (0)	Yeah, I have camber plates and the e9x arms or adjustable are not legal in Scca stx classing.
	Appreciate 0 Quote

12-10-2023, 04:27 AM	#4
Yvrbmw Enlisted Member 17 Rep 43 Posts Drives: 128 Join Date: Oct 2021 Location: Vancouver iTrader: (0)	I posted up an offer to have some made last year but only had one reply. Cost was too much if you can’t design or machine your own.
	Appreciate 0 Quote

12-15-2023, 05:35 PM	#5
SKI-R Working towards usefulness 159 Rep 238 Posts Drives: 128i, Tundra, B8S4 Join Date: Nov 2019 Location: Canmore iTrader: (1)	https://whitelineperformance.com/pro...-arm-lower-arm Not bushings on their own, but might be an option. __________________ 09 128i Slicktop - TCKlines, KMac Plates, M3 RSFB, M3 RSB, Hotchkis FSB/endlinks, 1M brace, Wavetrac, Coolerworx, JKVK headers, RPM Motorsport Tune, Yokohama A052 255/40/17s
	Appreciate 0 Quote

01-19-2024, 08:04 AM	#6
foflo New Member 8 Rep 12 Posts Drives: BMW 128i Join Date: Jul 2022 Location: United States iTrader: (0)	I ended up machining my own, appreciate the recommendation tho.
	Appreciate 1 SKI-R159.00 Quote