ER Charge Pipe & Tial BOV Install Pics

Orlin · 07-18-2011, 04:55 AM

Sorry for the delay boys, below are some pics from my install on Sunday. Thanks again to Vinney, Richard and Craig who all helped me. Overall it went pretty well apart from having to take a few trips to my local super cheap auto store because ER did not plug my bung and also did not send me the plastic piping and one of the big metal clamps. I also took this opportunity to clean my dci with the k&n filter kit.

In regards to sound the Tial is for sure the quietest out of the 3 choices but I really like the sound and I also like the fact that its there but does not attract unwanted attention from the authorities.

One negative point of the Tial bov is the size, it is higher then the Synapse and does make for a more difficult install on our RHD cars. If you are not doing the install yourself then don't worry so much as your local shop will have the issue of making it fit. If you have any questions regarding the install or the pics just ask and ill try and answer

mcmn · 07-18-2011, 06:09 AM

nice pics! i have mine coming, same setup.

btw, I dont think i have ever seen a tiled garage floor before!

mcmn · 07-18-2011, 06:29 AM

i've just been reading that some panel beating is involved in getting this in???

Harlequin · 07-18-2011, 06:35 AM

Nice.

BBK · 07-18-2011, 07:11 AM

Yeah mcmn, it was extremely difficult to get on. I would even say it's impossible without panel beating...

That is unless Orlin's engine was just slightly too far to the right? We are talking mm's here. Even with the panel beating, it took some heavy handed yanking to get it in place! But we'll be able to tell you if it's isolated or not this weekend when we do mine.

BMW86 · 07-18-2011, 08:38 AM

Nice write up and pics Matt. The Tial BOV was a tough one to fit due to the clearance issues but Matts panel-beating skills saved the day. My Synapse BOV was an awkward fit but I didn't have the same issues. I'm also glad the T-map sensor wasn't an issue as that took me quite some time when I did it on my car. Lesson learnt for next time is to check if all the parts came in the box as a few were missing but fortunately Supercheap was just around the corner.

Orlin · 07-18-2011, 03:54 PM

yeh what I would do is ask Advan, is that the place Kenny got his cp and tial installed? and see if they had the same clearance issues that we did and if any panel beating was required for his install then we will see if my engine is one of a kind lol.

BMWRX · 07-18-2011, 04:17 PM

Quote:

Originally Posted by Orlin

yeh what I would do is ask Advan, is that the place Kenny got his cp and tial installed? and see if they had the same clearance issues that we did and if any panel beating was required for his install then we will see if my engine is one of a kind lol.

Well, you do have an N54 in a hatch...

micha3l · 07-18-2011, 04:50 PM

Anyone wanna help me install my charge pipe....?

MrBlonde · 07-18-2011, 05:28 PM

Quote:

Originally Posted by Orlin

yeh what I would do is ask Advan, is that the place Kenny got his cp and tial installed? and see if they had the same clearance issues that we did and if any panel beating was required for his install then we will see if my engine is one of a kind lol.

No.

BBK · 07-18-2011, 05:53 PM

Quote:

Originally Posted by micha3l

Anyone wanna help me install my charge pipe....?

Mate we are doing mine on Sunday at Craig's place so if you can come then we can do both at the same time!

JB4-335 · 07-18-2011, 08:10 PM

Nice pics Matt. Looks awesome.
Nothing is bolt on anymore. They all say direct bolt on and it just never seems the case.
Wasn't aware that you had to swipe your credit card for an activation fee with the CP. Sounds like a tune I know.

BMW86 · 07-18-2011, 08:20 PM

Quote:

Originally Posted by micha3l

Anyone wanna help me install my charge pipe....?

Quote:

Originally Posted by BBK

Mate we are doing mine on Sunday at Craig's place so if you can come then we can do both at the same time!

We're meeting up at 10am to do Richards. Do your DV's come pre-installed into the CP? Also, do you have the long or short version?

Orlin · 07-18-2011, 08:32 PM

Quote:

Originally Posted by JB4135

Nice pics Matt. Looks awesome.
Nothing is bolt on anymore. They all say direct bolt on and it just never seems the case.
Wasn't aware that you had to swipe your credit card for an activation fee with the CP. Sounds like a tune I know.

haha yeh I needed my credit card to remove the tmap sensor, surprisingly I did that part in about 30 seconds and many people say its the hardest part of the install. Maybe I got lucky

BBK · 07-18-2011, 10:02 PM

Maybe the Westpac card is better than the CBA?

Orlin · 07-18-2011, 10:04 PM

Quote:

Originally Posted by BBK

Maybe the Westpac card is better than the CBA?

haha I think so!

BMW86 · 07-18-2011, 10:15 PM

Quote:

Originally Posted by BBK

Maybe the Westpac card is better than the CBA?

The new paypass cards work a treat, you can remove the t-map remotely

JB4-335 · 07-18-2011, 10:19 PM

Quote:

Originally Posted by BMW86

The new paypass cards work a treat, you can remove the t-map remotely

alik01 · 07-18-2011, 10:25 PM

Looks awesome Orlin! Congrats - looks like it was a pretty fun day to boot!

Orlin · 07-18-2011, 10:32 PM

Quote:

Originally Posted by alik01

Looks awesome Orlin! Congrats - looks like it was a pretty fun day to boot!

Thanks! yeh overall it was really good day

Jeef Beef · 07-18-2011, 10:53 PM

Where's the pizza and beer!

..

Lookin good mate. Such a bastard for getting it all installed before mine's even arrived

JB4-335 · 07-18-2011, 10:56 PM

Quote:

Originally Posted by Jeef Beef

Where's the pizza and beer!

..

Lookin good mate. Such a bastard for getting it all installed before mine's even arrived

mmmmmmmmm Pizza and Beer would hit the spot right now.
Still no CP Jeef.....

07-18-2011, 04:55 AM	#1
Orlin Major 44 Rep 1,359 Posts Drives: F30 335i Join Date: Feb 2009 Location: Brisbane, Australia iTrader: (1)	ER Charge Pipe & Tial BOV Install Pics Sorry for the delay boys, below are some pics from my install on Sunday. Thanks again to Vinney, Richard and Craig who all helped me. Overall it went pretty well apart from having to take a few trips to my local super cheap auto store because ER did not plug my bung and also did not send me the plastic piping and one of the big metal clamps. I also took this opportunity to clean my dci with the k&n filter kit. In regards to sound the Tial is for sure the quietest out of the 3 choices but I really like the sound and I also like the fact that its there but does not attract unwanted attention from the authorities. One negative point of the Tial bov is the size, it is higher then the Synapse and does make for a more difficult install on our RHD cars. If you are not doing the install yourself then don't worry so much as your local shop will have the issue of making it fit. If you have any questions regarding the install or the pics just ask and ill try and answer
	Appreciate 0 Tweet Quote

07-18-2011, 06:09 AM	#2
mcmn Captain 29 Rep 693 Posts Drives: MY10 AW 135i Join Date: Jun 2011 Location: Melbourne iTrader: (0)	nice pics! i have mine coming, same setup. btw, I dont think i have ever seen a tiled garage floor before!
	Appreciate 0 Quote

07-18-2011, 06:29 AM	#3
mcmn Captain 29 Rep 693 Posts Drives: MY10 AW 135i Join Date: Jun 2011 Location: Melbourne iTrader: (0)	i've just been reading that some panel beating is involved in getting this in???
	Appreciate 0 Quote

07-18-2011, 06:35 AM	#4
Harlequin Brigadier General 334 Rep 4,021 Posts Drives: F32 Coupé Join Date: Mar 2011 Location: Brisbane, Australia BMW Club QLD Member iTrader: (5) Garage List 2015 428i M-Sport [8.40] 2012 1M Coupé [9.25] 2011 135i M-Sport [9.14]	Nice. __________________
	Appreciate 0 Quote

07-18-2011, 07:11 AM	#5
BBK Banned 89 Rep 3,070 Posts Drives: A boring one... Join Date: Oct 2008 Location: Australia iTrader: (0) Garage List 2009 BMW 135i [5.76]	Yeah mcmn, it was extremely difficult to get on. I would even say it's impossible without panel beating... That is unless Orlin's engine was just slightly too far to the right? We are talking mm's here. Even with the panel beating, it took some heavy handed yanking to get it in place! But we'll be able to tell you if it's isolated or not this weekend when we do mine.
	Appreciate 0 Quote

07-18-2011, 08:38 AM	#6
BMW86 Major General 398 Rep 9,156 Posts Drives: RS3 Sedan / Macan S Join Date: Jul 2008 Location: Australia iTrader: (0)	Nice write up and pics Matt. The Tial BOV was a tough one to fit due to the clearance issues but Matts panel-beating skills saved the day. My Synapse BOV was an awkward fit but I didn't have the same issues. I'm also glad the T-map sensor wasn't an issue as that took me quite some time when I did it on my car. Lesson learnt for next time is to check if all the parts came in the box as a few were missing but fortunately Supercheap was just around the corner.
	Appreciate 0 Quote

07-18-2011, 03:54 PM	#7
Orlin Major 44 Rep 1,359 Posts Drives: F30 335i Join Date: Feb 2009 Location: Brisbane, Australia iTrader: (1)	yeh what I would do is ask Advan, is that the place Kenny got his cp and tial installed? and see if they had the same clearance issues that we did and if any panel beating was required for his install then we will see if my engine is one of a kind lol.
	Appreciate 0 Quote

07-18-2011, 04:50 PM	#9
micha3l Lieutenant 26 Rep 513 Posts Drives: 2011 BMW M3 Join Date: Dec 2009 Location: Brisbane, Australia iTrader: (0)	Anyone wanna help me install my charge pipe....? __________________ 2011 BMW M3 - Mineral White - VF620 Supercharger - Gintani Sport Valved Exhaust - Harrop BBK - Arykym Front lip and Diffuser - KW Sleeve over kit - Forgestar CF5V Wheels 2009 BMW 135i - Space Grey - 11.841 @ 117.81mph - SOLD
	Appreciate 0 Quote

07-18-2011, 08:10 PM	#12
JB4-335 Brigadier General 168 Rep 3,093 Posts Drives: E92 BSM & E70 AW Join Date: Feb 2011 Location: Australia iTrader: (1)	Nice pics Matt. Looks awesome. Nothing is bolt on anymore. They all say direct bolt on and it just never seems the case. Wasn't aware that you had to swipe your credit card for an activation fee with the CP. Sounds like a tune I know.
	Appreciate 0 Quote

07-18-2011, 10:02 PM	#15
BBK Banned 89 Rep 3,070 Posts Drives: A boring one... Join Date: Oct 2008 Location: Australia iTrader: (0) Garage List 2009 BMW 135i [5.76]	Maybe the Westpac card is better than the CBA?
	Appreciate 0 Quote

07-18-2011, 10:25 PM	#19
alik01 Lieutenant Colonel 51 Rep 1,792 Posts Drives: Slowly & Responsibly Join Date: Nov 2009 Location: Darwin, Australia iTrader: (0)	Looks awesome Orlin! Congrats - looks like it was a pretty fun day to boot! __________________
	Appreciate 0 Quote

07-18-2011, 10:53 PM	#21
Jeef Beef Lord Captain Commander 110 Rep 3,093 Posts Drives: a sleeper Join Date: Oct 2009 Location: Sydney, Australia iTrader: (0)	Where's the pizza and beer! .. Lookin good mate. Such a bastard for getting it all installed before mine's even arrived __________________ E82 135i M-sport: SGM/6MT/Black
	Appreciate 0 Quote