bottom front seat cushion leather tear at seam

53N30W · 04-27-2024, 10:15 AM

Hi Folks. I have an E92 drivers front bottom cushion coming apart at the left to right factory seams. Black leather sport seat.

Has anyone out there either had it recovered or repaired. ?

I don't think Bmw sells the cover anymore.

Thanks again.

Bims328i · 04-28-2024, 11:53 AM

I replaced mine with a OEM passenger side cover found online. You have to remove the seat. Getting the side switch assembly off can be problematic. At least on E90 there is a clip you have to reach a tool up inside the plastic assembly and push up/down while another clip midway has to pushed in the opposite direction.

When you try to release the middle clip the front has a tendency to fall back in so you have to apply force to keep it pulled off the clip after it has been released.

Also for some reason the driver side seat belt glamor cover is a real pain to remove. I broke mine in the process, but it still clips back in.

I'm pretty sure they sell the cover sets online too. As in full leather. At that point you just have to get some hog clips, pull the old cover off the foam and put new one on. It's not that difficult.

04-27-2024, 10:15 AM	#1
53N30W Enlisted Member 20 Rep 45 Posts Drives: 2009 E92 328 Join Date: Nov 2012 Location: Pompano Beach FL iTrader: (0)	bottom front seat cushion leather tear at seam Hi Folks. I have an E92 drivers front bottom cushion coming apart at the left to right factory seams. Black leather sport seat. Has anyone out there either had it recovered or repaired. ? I don't think Bmw sells the cover anymore. Thanks again.
	Appreciate 0 Tweet Quote

04-28-2024, 11:53 AM	#2
Bims328i DIYer 271 Rep 310 Posts Drives: 2008 328i E90 SULEV Join Date: Jul 2020 Location: United States iTrader: (0)	I replaced mine with a OEM passenger side cover found online. You have to remove the seat. Getting the side switch assembly off can be problematic. At least on E90 there is a clip you have to reach a tool up inside the plastic assembly and push up/down while another clip midway has to pushed in the opposite direction. When you try to release the middle clip the front has a tendency to fall back in so you have to apply force to keep it pulled off the clip after it has been released. Also for some reason the driver side seat belt glamor cover is a real pain to remove. I broke mine in the process, but it still clips back in. I'm pretty sure they sell the cover sets online too. As in full leather. At that point you just have to get some hog clips, pull the old cover off the foam and put new one on. It's not that difficult.
	Appreciate 0 Quote