|
|
|
|
Post Reply |
|
Thread Tools | Search this Thread |
02-01-2016, 12:23 PM | #1 |
Private First Class
177
Rep 96
Posts |
FS: CP-E Downpipes, BMS Thermostat, AN Block Fittings, Custom Cold Air Intake
Hey guys, selling off a few parts I had on my car prior to my ST kit, as well as some fittings I had accumulated prior to buying a full kit! All prices listed are picked up (Philly area). Shipping will be more. CP-E Catless Downpipes - used for 5k miles. These have the cast bellmouth and will never crack! SOLD BMS Sport Oil Cooler Valve - used for 5k miles. This is the 2008+ version off the BMS website (they are currently out of stock). SOLD Custom Cold Air Intake - used for 2500 miles. This was made for me by Rick @ Defiv. It is similar to the Stett style intake. It includes all couplers and clamps needed. This would be great to pair with the VTT style inlets, and give you the best of both worlds. I tested this back to back at the strip vs DCI, and ran 0.2s quicker, 2.5mph faster due to much cooler IAT's and not heat soaking nearly as much when sitting in the staging lanes. SOLD AN fittings for custom ST kits - brand new. All you would need in addition to these would be an oil drain fitting. This includes the oil feed (dual -4AN, with -4AN cap included to block which side isn't used / needed), oil drain plug, front / rear block coolant fittings (and -6AN cap for which side isn't used / needed), and a -6AN bung to weld on to your coolant block / pipe. $100 for all pieces 3" - 2.5" FMIC elbow coupler - used 500 miles. $10
__________________
Last edited by jyamona; 02-10-2016 at 10:46 AM.. |
02-04-2016, 07:39 AM | #5 |
Private First Class
177
Rep 96
Posts |
|
Appreciate
0
|
02-04-2016, 09:59 AM | #6 |
Captain
41
Rep 792
Posts
Drives: 135i + F25 X3 35i FBO
Join Date: May 2010
Location: Long Island, NY
|
bump for a good seller
__________________
2013 135i Coupe / LMB on Oyster / 6 Speed / BMWP Front Bumper, Side Skirts, Suspension, Electonic Steering Wheel V2, and CF Rear Spoiler / Jb4 G5 ISO / BMS Intake / ActiveAutowerke Downpipe, Axleback, Intercooler, Strut Bar / BMS CDV Mod / F30 Performance Shift Knob/E-Brake Handle + Bimmian Alcentara Boots / MS8 + JL600/6 + JX500/1 Powering a JL 10w3 in Custom Trunk Box
|
Appreciate
0
|
02-08-2016, 09:14 AM | #9 |
Private First Class
177
Rep 96
Posts |
BUMP, adding another pic of the intake as I get a lot of messages for it. note, you may need to dremel a tiny bit off of the PS bracket for clearance.
|
Appreciate
0
|
02-10-2016, 10:46 AM | #10 |
Private First Class
177
Rep 96
Posts |
CP-E Downpipes and intake SOLD!
BUMP for the billet AN fittings |
Appreciate
0
|
Post Reply |
Bookmarks |
|
|