|
|
|
10-31-2011, 03:59 PM | #1 |
Lieutenant
137
Rep 571
Posts |
Race Fuel....
can i use c16 race fuel (117) octane...which map i should run? Map 5 or custom map?
if i use race fuel (100 - 104) octane. Dp,DCI,jb4...which map to run how to do a custom map? what tools do i need |
11-01-2011, 06:18 AM | #2 |
Lieutenant
49
Rep 469
Posts
Drives: BMW 16' M3
Join Date: Aug 2009
Location: Oxnard, CA
|
Don't use c16 or any race gas with lead. MS109 race gas is very good. You can run map #5 on it. IMO you don't need a custom tune. Just use one of the pre-set tunes.
|
Appreciate
0
|
11-01-2011, 03:49 PM | #5 |
Second Lieutenant
10
Rep 204
Posts |
Not sure what the whp increase would be but C16 has a 10+ point higher motor octane rating than MS109. Since C16 is leaded there's always a possibility you can mess up the O2 sensor(s) on the exhaust side. I had a friend who used to run C16 quite a bit and would have to change his O2 sensor every 6 months or so.
|
Appreciate
0
|
11-01-2011, 04:11 PM | #6 |
The Stig!
54
Rep 889
Posts
Drives: 2008 135i 6MT
Join Date: Sep 2011
Location: Tulsa, Ok
|
Read the JB4 userguide, it explains all of this.
__________________
2008 135i - FBO + JB4 15ohm + Water Meth
|
Appreciate
0
|
11-02-2011, 03:38 PM | #8 |
The Stig!
54
Rep 889
Posts
Drives: 2008 135i 6MT
Join Date: Sep 2011
Location: Tulsa, Ok
|
Next time, google is your friend, its on the Burger website.
http://www.n54tech.com/forums/showthread.php?t=10605
__________________
2008 135i - FBO + JB4 15ohm + Water Meth
|
Appreciate
0
|
Post Reply |
Bookmarks |
Thread Tools | Search this Thread |
|
|