WSTO - Volk RE30 in 1er Fitment

[esses]

PM me the price please.

[Dave]

pm me price and weight

thanks

[LemansE82]

Julius,

Any change of getting Volk to make some specail offsets for the 1er if there's enough interest? 40 frnt and 45 rear is not exactly perfect I believe. A group buy would be great to help us save a few more bucks would be great too.. Just a thought.

[arok]

40 and 45 rear with 8 and 9 setup should be OK. I should clear since I have rolled fenders in the rear

[LemansE82]

Originally Posted by arok

40 and 45 rear with 8 and 9 setup should be OK. I should clear since I have rolled fenders in the rear

I don't want to pay over 3k for being ok...I want it perfect so I don't have to roll the fenders. For 8/9 setup I'm guessing 42/43 frnt and 46/48 rear would be ideal.

[Evolved]

Originally Posted by xXxMLEExXx

Julius,

Any change of getting Volk to make some specail offsets for the 1er if there's enough interest? 40 frnt and 45 rear is not exactly perfect I believe. A group buy would be great to help us save a few more bucks would be great too.. Just a thought.

That's what I don't understand. From what I've always heard Volks are, technically, custom made to order wheels. So you should be able to get exactly what you want, although it could take 3-6 months.

Originally Posted by izzodesh

pm me price and weight

thanks

here

Originally Posted by Julius@WheelSTO

Also, I have been advised that the weights are as follows:
Front: 16.7lb
Rear: 17.9lb

I believe that these are from wheels of same width and about the same offset on a 5-114.3 bolt pattern. Should be very close

[Ryan@IND]

Originally Posted by ichiban

so do the pictures depict what the RE30 would look like in the 1er fitment? or are these pictures of 19x10 et20 rims.

Originally Posted by ichiban

??

and i'd like a price as well.

I believe that those pictures are of the L2 Face versions.

the 18 - 8.0 front is the S1 face and the 18 - 9.0 rear is the S2 face

[Ryan@IND]

Originally Posted by ichiban

??

and i'd like a price as well.

Originally Posted by Derk1127

please pm me a price as well

Originally Posted by esses

PM me the price please.

Originally Posted by izzodesh

pm me price and weight

thanks

Sent PM's on the information that you needed. Please feel free to call us at 312.730.7767

[Ryan@IND]

Originally Posted by xXxMLEExXx

Julius,

Any change of getting Volk to make some specail offsets for the 1er if there's enough interest? 40 frnt and 45 rear is not exactly perfect I believe. A group buy would be great to help us save a few more bucks would be great too.. Just a thought.

Originally Posted by Evolved

That's what I don't understand. From what I've always heard Volks are, technically, custom made to order wheels. So you should be able to get exactly what you want, although it could take 3-6 months.

volk wheels are generally not custom made wheels. I say generally, because they sell pre-defined fitments that are on their catalogs.

However, they can be ordered to a certain size and color. the only way that is going to happen is if we get an order of 10 sets or so and it will take roughly 3~5 months.

The spec that I listed on the OT is one that is right off of the catalog and can be ordered relatively easily.

Let us know what you'd like to do... if we have enough interest in one set of color and spec, I will do my best to work out the details with the supplier.

Originally Posted by arok

40 and 45 rear with 8 and 9 setup should be OK. I should clear since I have rolled fenders in the rear

Originally Posted by xXxMLEExXx

I don't want to pay over 3k for being ok...I want it perfect so I don't have to roll the fenders. For 8/9 setup I'm guessing 42/43 frnt and 46/48 rear would be ideal.

These are surely not conservative fitments but I don't think that they will create problems, depending on the tries.

I think that with 225/40-18 front and 255/35-18 rear would work perfectly without any issues.

they are a little less aggressive than the VMR VB3 by 0.5" front and back and I have heard good things about that fitment: (could be wrong). It means that the RE30 will stick out less than the VB3 by about 6mm front and back.

[LemansE82]

Originally Posted by Julius@WheelSTO

volk wheels are generally not custom made wheels. I say generally, because they sell pre-defined fitments that are on their catalogs.

However, they can be ordered to a certain size and color. the only way that is going to happen is if we get an order of 10 sets or so and it will take roughly 3~5 months.

The spec that I listed on the OT is one that is right off of the catalog and can be ordered relatively easily.

Let us know what you'd like to do... if we have enough interest in one set of color and spec, I will do my best to work out the details with the supplier.







These are surely not conservative fitments but I don't think that they will create problems, depending on the tries.

I think that with 225/40-18 front and 255/35-18 rear would work perfectly without any issues.

they are a little less aggressive than the VMR VB3 by 0.5" front and back and I have heard good things about that fitment: (could be wrong). It means that the RE30 will stick out less than the VB3 by about 6mm front and back.

Julius,

225/40-18 front and 255/35-18 is exactly what I planned to do.
I can live with the 40/45 offset, but not with the black and polish lip.
Did Volk come out with another style like the TE's with that offset and
possibly that new bronze color?

[rcracer_tx]

Pm the price for the meta gold/bronze staggered setup please.

[Diggy Diggy]

PM me the price for the gold staggered setup also.

[infinitekidM2C]

Sorry i dont think the gold's are available for our cars...check out the early posts

[LemansE82]

Originally Posted by infinitekid2002

Sorry i dont think the gold's are available for our cars...check out the early posts

Yea..it's not available as mentioned, but with enough interest...it can be.

Btw..they are not gold...they are a new bronze color.

[rcracer_tx]

Originally Posted by xXxMLEExXx

Yea..it's not available as mentioned, but with enough interest...it can be.

Btw..they are not gold...they are a new bronze color.

OOPS... I meant bronze, Its been a long day

[Diggy Diggy]

Well.. then PM me the price for the black... lol

[infinitekidM2C]

If we cannot get 10 orders of those bronze for a proper 1-er offset i will be incredibly surprised and disappointed. Everyone who would be down for that state so and maybe we can make it happen...

[Ryan@IND]

Originally Posted by rcracer_tx

OOPS... I meant bronze, Its been a long day

Originally Posted by Spoolin

Well.. then PM me the price for the black... lol

sent you guys PMs on the RE30 Premium Color Black machining.

Originally Posted by infinitekid2002

If we cannot get 10 orders of those bronze for a proper 1-er offset i will be incredibly surprised and disappointed. Everyone who would be down for that state so and maybe we can make it happen...

10 sets are definitely possible for the special 1er fitment. Do we really have 10 people? Willing to do a really good price on these, if there are 10 people.

[infinitekidM2C]

I am willing for proper fitted bronze 18's...they are sick wheels and light...what's not to like?

[Derk1127]

please pm me the really good price if 10 sets of bronze wheels are purchased

[infinitekidM2C]

Build it and they will come.....lol

[infinitekidM2C]

We have 4 apparent orders as of now...Vendor can we set this up as a proper group buy title..i think it will attract more attention...if 10 people dont want 18" Volk Rims in proper 1-er offsets im moving to North Korea.