|
|
|
06-18-2017, 10:39 AM | #1 |
New Member
5
Rep 23
Posts |
Stripped rear exhaust hanger mount
I was installing a hitch last night and had to lower the exhaust. When putting the m8 1.25 bolt back in I noticed it angled slightly and stopped about half way in. The bolt looks good so I'm assuming the female side is stripped.
Any suggestions? Is a tap the best option? I'm assuming I'd need to expand the hole to 3/8 or so? Attached is a photo if it helps any. |
06-18-2017, 08:57 PM | #3 |
New Member
5
Rep 23
Posts |
|
Appreciate
0
|
06-19-2017, 06:03 PM | #5 |
First Lieutenant
77
Rep 310
Posts |
+1 for re-tap...glad you got it sorted. Should be fine now.
__________________
2011 BMW 135i M Sport Space Grey - BMS JB4, VRSF 3.5" catless DP, Berk exhaust, BMS intake, ER CP, Eibach Pro-Kit, H&R spacers, black kidneys, Blacklines, LUX angel eyes
2014 BMW X5 xDrive 35d M Sport Mineral White - MPBK w/ F85 rotors & Carbotech pads, ACS Springs/Links, iND reflector deletes, iND black roundels, MP black kidneys, M50D grille inserts 2007 Suzuki GSX-R 750 - too much to list |
Appreciate
0
|
Post Reply |
Bookmarks |
|
|