|
|
|
05-24-2010, 11:32 PM | #1 |
Private
8
Rep 56
Posts |
Hartge 4 tip exhaust
iam new to all this stuff, but i saw on Hartge's website that the 4 tip exhaust works for the 125i and 135i...so will it work on a 128i? and how do people get Hartge products in the USA because i havnt found a USA site?
|
05-24-2010, 11:56 PM | #2 |
Collecting dust!
55
Rep 2,009
Posts |
Try WSTO
|
Appreciate
0
|
05-25-2010, 10:53 AM | #3 |
Major
114
Rep 1,323
Posts |
The Hartge 4 tip exhaust will not work on US Model cars due to the carbon canister interfering.
The only options at this point are RPI and the new 3D Design exhaust. The Bastuck and Eisenmann will fit with some modification. |
Appreciate
0
|
05-25-2010, 11:09 AM | #4 |
Collecting dust!
55
Rep 2,009
Posts |
I could of sworn someone here in the US have that set up... JRB1 was the username???
|
Appreciate
0
|
05-25-2010, 11:23 AM | #5 |
Brigadier General
160
Rep 4,013
Posts |
Hey Frank, how much performance gain do you think would there be for the 128i with the 3d quad exhaust??? And speaking on that note, how much are you guys getting on ur 135i?
|
Appreciate
0
|
05-25-2010, 11:27 AM | #6 |
Major
114
Rep 1,323
Posts |
We havn't dyno tested the exhaust yet, but seeing as it is manufactured by Arqray it should be right on par with all other high quality exhausts . We are not sure on the 128i either, but with any exhaust you are only looking at around 5-10 horsepower, and the quad system is purely aesthetic.
|
Appreciate
0
|
05-25-2010, 05:59 PM | #9 | |
1768
Rep 7,652
Posts |
Quote:
the 3D Design exhaust is made to work with the 3D Design diffuser or you can trim the stock diffuser. The passenger side tip location is a mirror image of the driver side. the other options that we offer for the US customers are the Remus and RPI. Remus is just an axle back system whereas the RPI is a full downpipe back system. - Julius -
__________________
|
|
Appreciate
0
|
05-26-2010, 02:21 PM | #12 | |
wabbit!
41
Rep 225
Posts |
Quote:
im from mexico and i would like to get a quad exhaust system and the rear bumper that fit a 125i 2010, where can i get them? thanks |
|
Appreciate
0
|
05-26-2010, 03:35 PM | #13 | ||
1768
Rep 7,652
Posts |
Quote:
Quote:
the 3D Design has tips that are basically mirror images of the stock tips. The Hartge system is a system that relocated the tips towards the center (kind of like the E92 M3 look). the Hartge system will only work with the Hartge rear diffuser. Whereas the 3D Design will work with the 3D Design diffuser or you can modify your stock diffuser for the passenger side tips.
__________________
|
||
Appreciate
0
|
05-26-2010, 05:04 PM | #14 |
Brigadier General
160
Rep 4,013
Posts |
cool cool, one last question julius, do you by chance have a vid to compare the 3d design and hartge quad exhaust note??? thanks in advance :P
|
Appreciate
0
|
05-26-2010, 11:38 PM | #15 | |
wabbit!
41
Rep 225
Posts |
Quote:
sorry , didnt get the PM |
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|