|
|
|
|
|
|
| ||||||||||||||||
Post Reply |
|
|
Thread Tools | Search this Thread |
| 12-05-2011, 12:41 PM | #1 |
|
Private First Class
 
23
Rep 196
Posts |
*RSiTuning.com - Pre-Order - 135i E82 N55 "Turbo-back Downpipe"
 Are you looking to gain top shelf performance from your N55 platform? RSi Tuning's premier downpipe setup allows for the most aggressive tuning and the biggest gains in both horse power and torque to the wheels.  ORDER INFORMATION HERE PERFORMANCE GAINS  Dyno proven numbers on an otherwise stock car of 28whp and 55wtq! DESIGN The product is superior by design - it eliminates 2 Y-pipes and keeps the exhaust 1 large, single, and smooth mandrel bent pipe. This design helps to eliminate turbulence and increase exhaust flow. This increase in flow allows the turbo to run at its peak efficiency. Turbo lag is minimized and target boost levels are achieved sooner to provide power when it is most valued...immediately off the line and throughout the power band. The biggest gains showing mid-range. All products provided by RSi Tuning are strictly US made from the highest quality 304 stainless steel materials and fabricated with a high degree of care. All flanges are CNC lathe and water jet cut. All bends are mandrel bent and the few welds necessary are 100% tig welded.  *Prototype Shown  EXHAUST TONE The full 3.5" to 3" design also helps to allow better tone from the exhaust system. The large diameter piping acts like a resonating chamber, canceling out low harmonic exhaust notes that many consider as "drone". The turbo spool is much more pronounced and can even be heard during low points of acceleration and deceleration. Since the design meets up with the stock muffler or axle-back, the tone is aggressive but manageable. PRICING Pricing for the Pre-Order is dependent on the amount of people who participate. It only requires half deposit down to reserve a spot. Pricing begins at $1195 for the first 5 people and drops $100 for every additional 5 people who participate. Pricing after the pre-order is subject to increase. Included in the package is both the 3.5" downpipe and full 3" mid-pipe. There are options for polishing as well as high temperature ceramic coating upon request. All systems include the necessary hardware needed for install as well as full detailed install instructions within the packaging. **HOLIDAY SPECIAL - Till January 6th ONLY - Applies to First 15. If 20 or more, it will drop an additional $100! *Stay tuned for more information to be posted regarding High-Flow catted versions ORDER HERE
__________________
 Last edited by Dr-Euro; 12-17-2011 at 03:09 PM.. |
Post Reply |
| Bookmarks |
|
|
