|
|
|
09-19-2022, 09:45 PM | #1 |
New Member
8
Rep 14
Posts |
Problem Solved... Rusty Wheel Hubs
idk who needs to hear this, but clean the mating surface of the wheel hubs where the rotor mounts when swapping them.. I had a minor buildup of rust around the hub and was causing the rotor to be about .5 to 1.0 mm of offset at an angle.. car rides so much better as a result of removing it and remounting at the correct angle.
|
Post Reply |
Bookmarks |
|
|